☆ 4.6 Article

Gear Crack Detection Based on Vibration Analysis Techniques and Statistical Process Control Charts (SPCC)

MACHINES (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Fault Diagnosis of Crack on Gearbox Using Vibration-Based Approaches

Sufyan A. Mohammed et al.

Summary: This study investigates vibration-based approaches for fault diagnosis of automotive gearboxes. The primary objective is to identify methods that can detect gear-tooth cracks, a common fault in gearboxes. The study found that time-domain analysis can better detect crack degree compared to the neural network technique.

SYMMETRY-BASEL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Dynamic Simulation of Cracked Spiral Bevel Gear Pair Considering Assembly Errors

Hongzheng Han et al.

Summary: This study investigates the tooth root crack fault of the spiral bevel gear pair (SBGP) by establishing a finite element model and performing tooth contact analysis. The maximum tooth root stress is analyzed considering assembly errors, and the tooth root crack fault of the bevel pinion with different crack degrees is simulated. The time-varying mesh stiffness (TVMS) of the SBGP with different degrees of the pinion tooth root crack fault is obtained. The sensitivities of various statistical indicators for identifying the tooth root crack fault of SBGP under the influence of assembly errors are verified. This paper provides a necessary theoretical basis for the analysis and diagnosis of tooth root crack faults in the SBGP transmission system.

MACHINES (2022)

Add to Collection

Article Engineering, Mechanical

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Lantao Yang et al.

Summary: This paper proposes an improved mesh stiffness calculation model for cracked gears, considering the crack opening state by re-evaluating the effective compression section and the neutral layer. The study shows that the proposed model achieves higher accuracy compared to the traditional model, with increasing precision as the crack grows.

ENGINEERING FAILURE ANALYSIS (2021)

Add to Collection

Article Acoustics

Research on the Influence of Time-Varying Excitation on Vibration Characteristics of the Spiral Bevel Geared Transmission System with Broken Teeth

Dalian Yang et al.

Summary: This study proposed a torsional vibration dynamic model for spiral bevel geared transmission considering time-varying mesh stiffness and friction excitation. By analyzing the vibration response of different broken tooth failures, it was found that the crest factor is sensitive to minor failures, while kurtosis is sensitive to severe failures, and the energy of the low-frequency band increases significantly with the increase of degrees of broken tooth failure.

SHOCK AND VIBRATION (2021)

Add to Collection

Article Engineering, Mechanical

Spiral Bevel Gears Nonlinear Vibration Having Radial and Axial Misalignments Effects

Moslem Molaie et al.

Summary: This study investigates the destructive effects of different types of misalignments on a spiral bevel gear pair, finding that axial misalignment is the most severe case. It is observed that chaotic responses are less likely for the case with both types of misalignments compared to the case with only axial misalignment.

VIBRATION (2021)

Add to Collection

Article Multidisciplinary Sciences

Detection of Gear Wear and Faults in Spur Gear Systems Using Statistical Parameters and Univariate Statistical Process Control Charts

Sinan Maras et al.

Summary: This study examined wear faults in spur gears using vibration analysis, statistical process control method, and statistical parameters. By establishing a closed-loop test rig and monitoring vibration amplitudes, the accuracy and convergence of the statistical process control method were verified.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Rolling Bearing Fault Detection Based on Vibration Signal Analysis and Cumulative Sum Control Chart

Saja Mohammed Jawad et al.

Summary: A fault detection system for bearings was developed using vibration analysis technique and statistical control chart approach in this research. Various bearing faults were simulated in a test rig, with vibration signals captured and indicative features extracted for designing a control chart. The Cumulative Sum Control Chart (CUSUM) was found to effectively detect small changes in bearing health states, showing higher out-of-control points in the case of combined cage and ball fault compared to other fault types.

FME TRANSACTIONS (2021)

Add to Collection

Review Engineering, Mechanical

Gear fault models and dynamics-based modelling for gear fault detection - A review

Omar D. Mohammed et al.

ENGINEERING FAILURE ANALYSIS (2020)

Add to Collection

Article Mechanics

Tribo-dynamic model and fatigue life analysis of spiral bevel gears

Wei Cao et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2019)

Add to Collection

Article Physics, Multidisciplinary

A Method for Diagnosing Gearboxes of Means of Transport Using Multi-Stage Filtering and Entropy

Tomasz Figlus

ENTROPY (2019)

Add to Collection

Article Engineering, Mechanical

Comprehensive planet gear diagnostics: Use of transmission error and mesh phasing to distinguish localised fault types and identify faulty gears

Dikang Peng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Mechanics

Gear fault diagnosis under non-stationary operating mode based on EMD, TKEO, and Shock Detector

Ridha Ziani et al.

COMPTES RENDUS MECANIQUE (2019)

Add to Collection

Article Engineering, Multidisciplinary

Modelling and Dynamic Analysis of the Spiral Bevel Gear-Shaft-Bearing-Gearbox Coupling System

Haimin Zhu et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2019)

Add to Collection

Article Mechanics

Analytical models of mesh stiffness for cracked spur gears considering gear body deflection and dynamic simulation

Hanjun Jiang et al.

MECCANICA (2019)

Add to Collection

Article Automation & Control Systems

A Wavelet-Based Statistical Approach for Monitoring and Diagnosis of Compound Faults With Application to Rolling Bearings

Wei Fan et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Engineering, Mechanical

Fault mode analysis and detection for gear tooth crack during its propagating process based on dynamic simulation method

Liming Wang et al.

ENGINEERING FAILURE ANALYSIS (2017)

Add to Collection

Article Engineering, Mechanical

Nonlinear vibration of the bevel gear with teeth profile modification

Habibollah Motahar et al.

NONLINEAR DYNAMICS (2016)

Add to Collection

Article Engineering, Mechanical

Dynamic response and time-frequency analysis for gear tooth crack detection

Omar D. Mohammed et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Article Engineering, Mechanical

Development of a gear vibration indicator and its application in gear wear monitoring

Chongqing Hu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Add to Collection

Review Engineering, Mechanical

Review on dynamics of cracked gear systems

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2015)

Add to Collection

Article Engineering, Mechanical

Time-varying mesh stiffness calculation of cracked spur gears

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2014)

Add to Collection

Article Engineering, Mechanical

Effects of gear mesh fluctuation and defaults on the dynamic behavior of two-stage straight bevel system

Driss Yassine et al.

MECHANISM AND MACHINE THEORY (2014)

Add to Collection

Article Genetics & Heredity

Exponentially weighted moving average chart as a suitable tool for nuchal translucency quality review

Martin Hynek et al.

PRENATAL DIAGNOSIS (2014)

Add to Collection

Article Engineering, Mechanical

Vibration signal analysis for gear fault diagnosis with various crack progression scenarios

Omar D. Mohammed et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2013)

Add to Collection

Article Engineering, Mechanical

Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2011)

Add to Collection

Article Mechanics

Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

Add to Collection

Article Acoustics

Simulation of spur gear dynamics and estimation of fault growth

Siyan Wu et al.

JOURNAL OF SOUND AND VIBRATION (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.