4.3 Article

Oxide TFTs with S/D-contacts patterned by high-resolution reverse-offset printed resist layers

Journal

FLEXIBLE AND PRINTED ELECTRONICS
Volume 8, Issue 1, Pages -

Publisher

IOP Publishing Ltd
DOI: 10.1088/2058-8585/acbf65

Keywords

thin-film transistor; high-resolution printing; metal oxide; reverse-offset printing; solution process

Ask authors/readers for more resources

There is a growing interest in the fabrication of metal oxide TFTs using scalable, low-cost solution and printing processes for applications such as flexible displays and biosensors. However, using silver nanoparticles for printed source/drain-contacts usually leads to degraded electrical characteristics and stability problems. To overcome this, a patterning method based on high-resolution reverse-offset printing (ROP) has been developed. By using this method, solution-processed indium oxide (In2O3) TFTs with aluminum (Al) source/drain-contacts were successfully fabricated with good uniformity and constant mobility over a wide range of width/length-ratios.
Besides the metal oxide thin film transistors (TFTs) in flat-panel displays that are fabricated using vacuum-processes, there is a growing interest in the fabrication of metal oxide TFTs by means of scalable, low-cost solution and printing processes for applications such as flexible displays and biosensors. Although devices with printed semiconductor and gate insulator can exhibit good electrical performance, source/drain-contacts (S/D) printed from silver (Ag) nanoparticles (NPs) typically suffer from deteriorated electrical characteristics and stability problems. On the other hand, metals providing good contacts, such as aluminum (Al), titanium (Ti) and molybdenum (Mo), cannot be formed as air-stable NPs. To overcome these issues, we have developed a patterning method based on high-resolution reverse-offset printing (ROP) of a sacrificial polymer resist layer. ROP delivers patterns with micrometer-level resolution and steep sidewalls, which are ideal for patterning vacuum-deposited metal contacts at high resolution via lift-off process. Solution-processed indium oxide (In2O3) TFTs were successfully fabricated by using ROP lift-off process for patterning of gate and S/D-electrodes using Al. The fabricated In2O3-based TFTs with Al S/D-contacts exhibit good uniformity, constant mobility (mu (sat)) similar to 2 cm(2) (V s)(-1) over a wide range of width/length-ratios (W/L) and almost zero turn-on voltage (V (on)) similar to -0.2 V. TFTs down to 5 mu m channel lengths were successfully patterned. Further development of the fabrication process could lead to flexible fully-print-patterned high-resolution TFT backplanes for flexible displays, biosensors, photosensors and x-ray detectors.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.3
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available