☆ 4.6 Article

Towards weathering and corrosion resistant, self-warning and self-healing epoxy coatings with tannic acid loaded nanocontainers

NPJ MATERIALS DEGRADATION (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Bio-inspired Multifunctional Graphene-Epoxy Anticorrosion Coatings by Low-Defect Engineered Graphene

Jiheng Ding et al.

Summary: In this study, a bio-inspired multilayered graphene-epoxy composite coating was fabricated using a scalable spraying approach. The composite coating exhibited good dispersity and structure repair capabilities, forming interlock structures to improve coating resistance. It also showed highly anisotropic thermal and electrical conductivities and the ability to self-monitor structural safety and health.

ACS NANO (2022)

Add to Collection

Article Engineering, Environmental

Structure and performance insights in carbon dots-functionalized MXene-epoxy ultrathin anticorrosion coatings

Jiheng Ding et al.

Summary: Functionalized MXene nanosheets with carbon dots significantly improve the chemical stability of MXene in water and enhance the anticorrosion performance of epoxy composite coatings through a flow-induced approach. The unique structure of CD-Ti3C2Tx platelets inhibits corrosion-promotion activity and improves the stability and durability of the coatings for heavy-anticorrosion applications in harsh sea environments.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Photothermally activated self-healing protective coating based on the close and seal dual-action mechanisms

Jinke Wang et al.

Summary: A dual-action self-healing coating with excellent photothermal response to both NIR laser and sunlight irradiation was prepared, utilizing a shape memory epoxy matrix embedded with PCL microspheres covered with TiN NPs. The coating demonstrated efficient self-healing performance under light illumination, accelerating water evaporation around scratch to inhibit corrosion activity and improve corrosion protection. Outdoor exposure tests confirmed that sunlight also contributed to the prominent self-healing performance and reduced corrosion current outputs.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Hindered phenolic antioxidant passivation of black phosphorus affords air stability and free radical quenching

Shuilai Qiu et al.

Summary: This study enhances the environmental stability and flame retardant performance of BP through modification, effectively reducing the fire hazard of TPU. The introduction of BP-HPL significantly reduces the heat release rate and total heat release values of TPU, as well as smoke volume and carbon monoxide production.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Polymer Science

A green way to simultaneously enhance the mechanical, flame retardant and anti-ultraviolet aging properties of polylactide composites by the incorporation of tannic acid derivatives

Shuang Qiu et al.

Summary: In this study, a bio-based additive (BA-TA-MEL) was synthesized and successfully used as a flame-retardant and anti-UV agent for polylactic acid (PLA). The PLA/5%BA-TA-MEL exhibited excellent flame retardancy, UV resistance, and enhanced tensile strength. This research provides a new approach to preparing biodegradable materials with excellent performance and extended life, aiming to reduce the environmental pressure and pollution caused by petroleum-based plastics.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection

Article Chemistry, Applied

Paradox effects of flake carbonyl iron on the photodegradation behaviors of epoxy-based wave-absorbing coatings: Photo-catalytic and UV blocking

Lei Xia et al.

Summary: This study systematically investigated the effects of additional FCI on the photo-oxidative behaviors of EP coatings through UV aging experiments. The results showed that the addition of FCI significantly accelerated the photo-oxidation of EP coatings, potentially attributed to the corrosion of FCI and the photo-catalytic degradation effects of its corrosion products. Interestingly, the cross-sectional analysis revealed a lower degradation depth of EP/FCI coating compared with pure EP coating, possibly due to the UV blocking effect of FCI.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Chemistry, Applied

Waterborne polyurethane coating based on tannic acid functionalized Ce-MMT nanocomposites for the corrosion protection of carbon steel

Shicheng Li et al.

Summary: By encapsulating corrosion inhibitors in pH-responsive nanocontainers, highly efficient coatings that provide strong active protection against aggressive environments can be developed. This study investigated the effect of tannic acid functionalized Ce-MMT nanocomposites on the anti-corrosion properties of waterborne polyurethane coating. The results showed that the composite coating had long-term anti-corrosion ability and significantly higher impedance compared to pure waterborne polyurethane coating. Additionally, the analysis revealed that Ce3+ and tannic acid could act as self-healing agents to block the corrosion process when the corrosive medium reaches the metal/coating interface through artificial scratches.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Chemistry, Physical

A pH-responsive intelligent coating based on composite CaCO3 microspheres for long-term corrosion protection of Q235 carbon steel

You Wu et al.

Summary: By incorporating BTA-CaCO3@TA microspheres into waterborne epoxy resin coatings, an eco-friendly and long-term pH-responsive intelligent anti-corrosion coating was developed, showing excellent long-term corrosion protection performance.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Two birds with one stone: Nanocontainers with synergetic inhibition and corrosion sensing abilities towards intelligent self-healing and self-reporting coating

Jinke Wang et al.

Summary: A smart coating with self-healing and self-reporting abilities was developed using mesoporous SiO2 nanoparticles. The coating exhibited corrosion inhibition and coloration properties, and showed enhanced resistance to corrosion on steel substrate. The coating also provided timely indication of damage through a color change reaction. This smart coating holds great potential for long-term corrosion protection.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Versatile Ti3C2Tx MXene for free-radical scavenging

Jiang Liu et al.

Summary: This study demonstrated the unique feature of MXene-Ti3C2Tx nanosheets in free-radical scavenging and designed a colorimetric H2O2 strip assay with good performance. The research systematically confirmed the scavenging capability of Ti3C2Tx for a series of reactive oxygen species and reactive nitrogen species, as well as its antioxidation capability in protecting cells from oxidative damage. This original work provides significant opportunities for MXenes in free-radical-related biomedical applications.

NANO RESEARCH (2022)

Add to Collection

Article Polymer Science

Strategies to mitigate the synergistic effects of moist-heat aging on TEMPO-oxidized nanocellulose

Camilla H. M. Camargos et al.

Summary: TEMPO-oxidized cellulose nanofibrils (CNF) are susceptible to degradation under moist-heat conditions, hindering their long-term applications. The resistance to degradation can be enhanced by incorporating lignin nanoparticles (LNP) or implementing an alkali-acid post-treatment, improving the stability of CNF and nanocomposite films.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection

Article Chemistry, Applied

Investigating the thermo-mechanical and UV-shielding properties of a nano-porous Zr(IV)-type metal-organic framework (MOF) incorporated epoxy composite coating

Arsalan Rahmani Ghohrodi et al.

Summary: The effects of UIO-66 nanoparticles on the thermal resistance, mechanical features, and UV resistance of epoxy-polyamide composite coatings were investigated. The results showed promising improvements in thermal and mechanical properties, as well as significant enhancement of UV-shielding properties with the presence of UIO-66 particles.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Designing Hybrid Mesoporous Pr/Tannate-Inbuilt ZIF8-Decorated MoS2 as Novel Nanoreservoirs toward Smart pH-Triggered Anti-corrosion/Robust Thermomechanical Epoxy Nanocoatings

Milad Motamedi et al.

Summary: In this study, a novel smart pH-triggered nanocoating was successfully prepared by incorporating organic tannic acid and inorganic praseodymium cations as corrosion inhibitors into a zeolitic imidazolate framework-type porous coordination polymer.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Analysis of Iron Complexes of Tannic Acid and Other Related Polyphenols as Revealed by Spectroscopic Techniques: Implications in the Identification and Characterization of Iron Gall Inks in Historical Manuscripts

Alba Espina et al.

Summary: This study reports a structural analysis of polyphenol complexes with iron and copper under different conditions, using various spectroscopic techniques and investigating fluorescence quenching. Interaction of polyphenols with iron results in color change and fluorescence quenching, facilitating Raman inspection of manuscripts.

ACS OMEGA (2022)

Add to Collection

Article Chemistry, Physical

Corrosion-sensing and self-healing dual-function coating based on 1,10-phenanthroline loaded urea formaldehyde microcapsules for carbon steel protection

Jinke Wang et al.

Summary: This study developed a smart coating with corrosion-sensing and self-healing functions on carbon steel. The coating incorporated UF microcapsules loaded with Phen molecules, which acted as both corrosion-sensing indicators and corrosion inhibitors. When the coating was damaged, the released Phen molecules would react with Fe2+ ions from the carbon steel substrate, displaying a red chelate compound for corrosion-sensing application. The smart coating not only achieved timely corrosion sensing, but also effectively suppressed corrosion activity near coating scratches.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Engineering, Environmental

A new strategy to prepare fully bio-based poly(lactic acid) composite with high flame retardancy, UV resistance, and rapid degradation in soil

Yuchun Li et al.

Summary: A fully bio-based additive (PA@CHTM) with a core-shell structure was synthesized to enhance the mechanical properties, flame retardancy, and UV-blocking performance of PLA, while accelerating its degradation in soil. With 9 wt% of PA@CHTM added, the oxygen index value, UL-94 test grade, and Young's modulus of PLA were significantly improved, and the photoaging process was delayed.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Stimulus Responsive Zeolitic Imidazolate Framework to Achieve Corrosion Sensing and Active Protecting in Polymeric Coatings

Chengbao Liu et al.

Summary: This study reports a smart polymeric coating by integrating nanosensors into the coating matrix, capable of efficient corrosion sensing and active anticorrosion protecting. The simple nanosensors based strategy paves a new way to develop high environmental adaptability protective materials with protecting, corrosion sensing, and self-healing functions.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Dual-action self-healing protective coatings with photothermal responsive corrosion inhibitor nanocontainers

Lingwei Ma et al.

Summary: This work introduces a novel nanocomposite coating with dual-action self-healing corrosion protection activated by the photothermal response of plasmonic titanium nitride nanoparticles, which efficiently suppresses the corrosion process at the exposed metal surface. The surface characterization and electrochemical measurement results proved that the nanocomposite coating exhibited optimal corrosion protection and excellent self-healing performance under NIR illumination within 30 seconds. This photo-controlled self-healing approach has the potential to design next-generation self-healing coatings with ultrafast response time and high healing efficiency.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Multilayer structural epoxy composite coating towards long-term corrosion/wear protection

Shijie Song et al.

Summary: The multifunctional epoxy composite coating with multilayer structure, constructed by layer-by-layer assembly method, shows improved impedance value, long-term chlorine resistance, reduced wear rate, and enhanced UV aging resistance.

CARBON (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A two-dimensional nanocontainer based on mesoporous polydopamine coated lamellar hydroxyapatite towards anticorrosion reinforcement of waterborne epoxy coatings

Li Cheng et al.

Summary: By utilizing versatile emulsion-induced approach, sandwich-like 2D nanocontainers based on mesoporous polydopamine (PDA) heterostructures on ultrathin bio-ceramic hydroxyapatite (HA) nanosheets were synthesized for potential application in improving coating service life in marine environment.

CORROSION SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Amino-functionalized Ti3C2Tx loading ZIF-8 nanocontainer@benzotriazole as multifunctional composite filler towards self-healing epoxy coating

Han Yan et al.

Summary: The novel self-healing epoxy coating shows significant improvements in corrosion resistance and wear resistance, providing long-term protection for metals.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Performance of ultraviolet exposed epoxy powder coatings functionalized with silica by hot mixing

Maria Fernandez-Alvarez et al.

Summary: The study found that adding up to 2% of SiO2 nanoparticles can reduce the chemical and physical degradation of epoxy powder coatings after UV exposure, and improve their wear resistance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Chemistry, Applied

Improving UV-Stability of epoxy coating using encapsulated halloysite nanotubes with organic UV-Stabilizers and lignin

Saeid Nikafshar et al.

Summary: This study developed a novel method to encapsulate organic UV stabilizers and lignin into halloysite nanotubes, improving the UV stability of epoxy coatings. Epoxy samples containing HNTs with encapsulated organic UV stabilizers and lignin exhibited significantly higher UV stability after accelerated weathering tests compared to epoxy resin with the same concentration of these components.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

Jordan Brito et al.

Summary: This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, focusing on the versatile chemistry of polyphenolic antioxidants. Including the discussion on controlling localization versus migration of antioxidants in polymer materials through surface grafting and assembly via noncovalent interactions. The understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials for various applications.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Synergistic reinforcement coating with anti-corrosion and UV aging resistance by filling modified CeO2 nanoflakes

Kai An et al.

Summary: The study involved incorporating modified CeO2 nanoflakes into an epoxy matrix to develop a composite coating with simultaneous anti-corrosion and UV aging resistance properties. The results showed improved corrosion resistance and UV aging resistance, indicating the potential for long-term protection and expanded application of rare earth elements in functional composite coatings.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Agricultural Engineering

Improvement of wood against UV weathering and decay by using plant origin substances: Tannin acid and tung oil

Yao Peng et al.

Summary: Tannin acid and tung oil were used to treat wood for better durability. Tung oil provided excellent color stability against weathering, while tannin acid acted as a UV absorber and free-radical scavenger. Wood treated with both substances exhibited the best durability during photodegradation and biodeterioration process.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Smart coating with dual-pH sensitive, inhibitor-loaded nanofibers for corrosion protection

Chao Li et al.

Summary: The study successfully prepared nanofibers containing a corrosion inhibitor with pH-sensitive properties, which can release the inhibitor at both low and high pH conditions to impede corrosion of AA2024-T3 substrate. The embedded nanofibers persistently release the inhibitor to inhibit corrosion when exposed to NaCl solution on artificially damaged coating samples.

NPJ MATERIALS DEGRADATION (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Mesoporous silica nanoparticles as carriers of active agents for smart anticorrosive organic coatings: a critical review

Federico Olivieri et al.

Summary: This review discusses the synthesis, loading and release strategies, as well as the anticorrosive performance of mesoporous silica nanoparticles (MSN) in advanced organic coatings. Through critical literature analysis, the most promising research trends and perspectives utilizing MSN in advanced organic coatings are proposed.

NANOSCALE (2021)

Add to Collection

Article Chemistry, Applied

Preparation and UV aging of nano-SiO2/fluorinated polyacrylate polyurethane hydrophobic composite coating

Fuying Yu et al.

PROGRESS IN ORGANIC COATINGS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Preparation of Strong Antioxidative, Therapeutic Nanoparticles Based on Amino Acid-Induced Ultrafast Assembly of Tea Polyphenols

Zeng Yi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Polyphenols as Morphogenetic Agents for the Controlled Synthesis of Mesoporous Silica Nanoparticles

Jialuo Luo et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Anti-/Pro-Oxidant Behavior of Naturally Occurring Molecules in Polymers and Biopolymers: A Brief Review

Nadka Tz. Dintcheva et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Applied

In-situ growth of ceria nanoparticles on graphene oxide nanoplatelets to be used as a multifunctional (UV shield/radical scavenger/anticorrosive) hybrid compound for exterior coatings

S. Amrollahi et al.

PROGRESS IN ORGANIC COATINGS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of tannic acid on corrosion behavior of carbon steel in NaCl solution

Wenhua Xu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Mussel-Inspired Self-Healing Coatings Based on Polydopamine-Coated Nanocontainers for Corrosion Protection

Bei Qian et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Cathodic driven coating delamination suppressed by inhibition of cation migration along Zn|polymer interface in atmospheric CO2

Viacheslav Shkirskiy et al.

NPJ MATERIALS DEGRADATION (2019)

Add to Collection

Article Polymer Science

Significantly enhanced antioxidant activity of chitosan through chemical modification with coumarins

Qing Li et al.

POLYMER CHEMISTRY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A mechanistic investigation of corrosion-driven organic coating failure on magnesium and its alloys

Geraint Williams et al.

NPJ MATERIALS DEGRADATION (2019)

Add to Collection

Article Polymer Science

The influence of nanostructured UV-blockers on mechanical properties of carbon fiber epoxy composites during accelerated weathering condition

Hamid Reza Pakravan et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Add to Collection

Review Polymer Science

Synthesis of nanoparticle-immobilized antioxidants and their antioxidative performances in polymer matrices: a review

Ming Lu et al.

POLYMER INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Applied

A novel multifunctional coating prepared by internal and external inhomogeneous modification of porous fillers

Chijia Wang et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-phenolic networks as a versatile platform to engineer nanomaterials and biointerfaces

Hirotaka Ejima et al.

NANO TODAY (2017)

Add to Collection

Article Chemistry, Applied

Fabrication of a low surface energy acrylic/melamine clearcoat with enhanced weathering and biological resistances: Investigation of the role of organic UV absorber and nanosilica particles

S. Amrollahi et al.

PROGRESS IN ORGANIC COATINGS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable Carbon Nanodots with Tunable Radical Scavenging Activity for Elastomers

Siwu Wu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Physical

Functionlized graphene serving as free radical scavenger and corrosion protection in gamma-irradiated epoxy composites

Wei Xia et al.

CARBON (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Inhibitor-loaded conducting polymer capsules for active corrosion protection of coating defects

N. Pirhady Tavandashti et al.

CORROSION SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Free radicals, natural antioxidants, and their reaction mechanisms

Satish Balasaheb Nimse et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Physical

Large Pore Mesoporous Silica Nanoparticles by Templating with a Nonsurfactant Molecule, Tannic Acid

Zhe Gao et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The inhibition effect of tannic acid on mild steel corrosion in seawater wet/dry cyclic conditions

Bei Qian et al.

CORROSION SCIENCE (2013)

Add to Collection

Article Polymer Science

Photooxidation of polymers: Relating material properties to chemical changes

J. -F. Larche et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.