Related references
Note: Only part of the references are listed.A review of printing strategies, sustainable cementitious materials and characterization methods in the context of extrusion-based 3D concrete printing
Yu Chen et al.
JOURNAL OF BUILDING ENGINEERING (2022)
A comprehensive analysis of buildability of 3D-printed concrete and the use of bi-linear stress-strain criterion-based failure curves towards their prediction
Avinaya Tripathi et al.
CEMENT & CONCRETE COMPOSITES (2022)
Comparison between methods for indirect assessment of buildability in fresh 3D printed mortar and concrete
Irina Ivanova et al.
CEMENT AND CONCRETE RESEARCH (2022)
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer: A Review
Anastasia Puzatova et al.
BUILDINGS (2022)
Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
Mikhail Elistratkin et al.
BUILDINGS (2022)
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Manu K. Mohan et al.
CEMENT & CONCRETE COMPOSITES (2021)
Mechanical properties of 3D printed concrete in hot temperatures
Aktham S. Alchaar et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails
Li Wang et al.
CEMENT AND CONCRETE RESEARCH (2021)
Investigation of steel wire mesh reinforcement method for 3D concrete printing
Miao Liu et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)
Improving performance of additive manufactured (3D printed) concrete: A review on material mix design, processing, interlayer bonding, and reinforcing methods
Shanaka Kristombu Baduge et al.
STRUCTURES (2021)
A discrete lattice model for assessment of buildability performance of 3D-printed concrete
Ze Chang et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)
3D Printing Unique Nanoclay-Incorporated Double-Network Hydrogels for Construction of Complex Tissue Engineering Scaffolds
Zhongwei Guo et al.
ADVANCED HEALTHCARE MATERIALS (2021)
Reinforcement method for 3D concrete printing using paste-coated bar penetrations
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2021)
Sustainable materials for 3D concrete printing
Shantanu Bhattacherjee et al.
CEMENT & CONCRETE COMPOSITES (2021)
Technologies for improving buildability in 3D concrete printing
Shravan Muthukrishnan et al.
CEMENT & CONCRETE COMPOSITES (2021)
Juxtaposing fresh material characterisation methods for buildability assessment of 3D printable cementitious mortars
F. P. Bos et al.
CEMENT & CONCRETE COMPOSITES (2021)
From analytical methods to numerical simulations: A process engineering toolbox for 3D concrete printing
A. Perrot et al.
CEMENT & CONCRETE COMPOSITES (2021)
Mesh reinforcing method for 3D Concrete Printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
3D printing of a post-tensioned concrete girder designed by topology optimization
Gieljan Vantyghem et al.
AUTOMATION IN CONSTRUCTION (2020)
A desorptivity-based approach for the assessment of phase separation during extrusion of cementitious materials
A. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2020)
Yield stress criteria to assess the buildability of 3D concrete printing
R. Jayathilakage et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Nailing of Layers: A Promising Way to Reinforce Concrete 3D Printing Structures
A. Perrot et al.
MATERIALS (2020)
Effect of testing procedures on buildability properties of 3D-printable concrete
Lorenzo Casagrande et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Setting on demand for digital concrete - Principles, measurements, chemistry, validation
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2020)
Fresh Properties of Cementitious Materials Containing Rice Husk Ash for Construction 3D Printing
Shravan Muthukrishnan et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)
Aggregate-bed 3D concrete printing with cement paste binder
Shiwei Yu et al.
CEMENT AND CONCRETE RESEARCH (2020)
Mechanical assessment of concrete - Steel bonding in 3D printed elements
Bilal Baz et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete: Concept and Feasibility Study
Viktor Mechtcherine et al.
MATERIALS (2020)
Bond properties of reinforcing bar penetrations in 3D concrete printing
Taylor Marchment et al.
AUTOMATION IN CONSTRUCTION (2020)
Layer-interface properties in 3D printed concrete: Dual hierarchical structure and micromechanical characterization
Zifan Geng et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of graphene oxide on high-strength concrete induced with rice husk ash: mechanical and durability performance
T. Shanmuga Priya et al.
INNOVATIVE INFRASTRUCTURE SOLUTIONS (2020)
Effective extrusion-based 3D printing system design for cementitious-based materials
Abdulrahman Albar et al.
RESULTS IN ENGINEERING (2020)
Rheological and harden properties of the high-thixotropy 3D printing concrete
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications
Roshan Jayathilakage et al.
MATERIALS AND STRUCTURES (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
Yu Chen et al.
APPLIED SCIENCES-BASEL (2019)
Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0
Flavio Craveiro et al.
AUTOMATION IN CONSTRUCTION (2019)
3D concrete printing: A lower bound analytical model for buildability performance quantification
Jacques Kruger et al.
AUTOMATION IN CONSTRUCTION (2019)
Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing
Viktor Mechtcherine et al.
AUTOMATION IN CONSTRUCTION (2019)
A feasible method for measuring the buildability of fresh 3D printing mortar
Qiang Yuan et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Guowei Ma et al.
MATERIALS LETTERS (2019)
Perspectives on a BIM-integrated software platform for robotic construction through Contour Crafting
Omid Davtalab et al.
AUTOMATION IN CONSTRUCTION (2018)
Additive manufacturing technology and its implementation in construction as an eco-innovative solution
Seyed Hamidreza Ghaffar et al.
AUTOMATION IN CONSTRUCTION (2018)
A self-reinforced cementitious composite for building-scale 3D printing
Daniel G. Soltan et al.
CEMENT & CONCRETE COMPOSITES (2018)
Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the Critical Micelle Concentration (CMC)
Ye Qian et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
Delphine Marchon et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D printing of reinforced concrete elements: Technology and design approach
Domenico Asprone et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
3D-printed steel reinforcement for digital concrete construction - Manufacture, mechanical properties and bond behaviour
Viktor Mechtcherine et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Zhijian Li et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Large-scale 3D printing by a team of mobile robots
Xu Zhang et al.
AUTOMATION IN CONSTRUCTION (2018)
3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM
Mehmet Sakin et al.
SUSTAINABILITY IN ENERGY AND BUILDINGS 2017 (2017)
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Freek P. Bos et al.
MATERIALS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Additive construction: State-of-the-art, challenges and opportunities
Nathalie Labonnote et al.
AUTOMATION IN CONSTRUCTION (2016)
A critical review of the use of 3-D printing in the construction industry
Peng Wu et al.
AUTOMATION IN CONSTRUCTION (2016)
Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders
C. Gosselin et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
BIM and ontology-based approach for building cost estimation
Seul-Ki Lee et al.
AUTOMATION IN CONSTRUCTION (2014)
Development of a BIM-based automated construction system
Lieyun Ding et al.
CREATIVE CONSTRUCTION CONFERENCE 2014 (2014)
Generating construction schedules through automatic data extraction using open BIM (building information modeling) technology
Hyunjoo Kim et al.
AUTOMATION IN CONSTRUCTION (2013)
Aggregation and breakage kinetics of fresh cement paste
Raissa Douglas Ferron et al.
CEMENT AND CONCRETE RESEARCH (2013)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering
Krishna C. R. Kolan et al.
BIOFABRICATION (2011)
The ternary system Portland cement-calcium sulphoaluminate clinker-anhydrite: Hydration mechanism and mortar properties
Laure Pelletier et al.
CEMENT & CONCRETE COMPOSITES (2010)
Cable-suspended robotic contour crafting system
Paul Bosscher et al.
AUTOMATION IN CONSTRUCTION (2007)
Freeform construction: Mega-scale rapid manufacturing for construction
R. A. Buswell et al.
AUTOMATION IN CONSTRUCTION (2007)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
Experimental investigation of contour crafting using ceramics materials
B Khoshnevis et al.
RAPID PROTOTYPING JOURNAL (2001)
Share Paper
