☆ 4.7 Article

Conductive Polymer Frameworks in Silicon Anodes for Advanced Lithium-Ion Batteries

ACS APPLIED POLYMER MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

N-Type Polyoxadiazole Conductive Polymer Binders Derived High-Performance Silicon Anodes Enabled by Crosslinking Metal Cations

Zhaomei Sun et al.

Summary: This study investigated metal-ion crosslinked polyoxadiazole (POD) as silicon anode binders, and found that the ionic radius and valence state significantly influence the polymer's mechanical properties and the electrolyte's infiltration. Calcium (Ca)-crosslinked POD showed excellent mechanical strength and improved cycling stability of the silicon anode. The cell with Ca-POD binder retained a capacity of 1770.1 mA h g(-1) after 100 cycles at 0.2 C, which is 285% higher than that of the cell with the PAALi binder (620.6 mA h g(-1)). This novel strategy using metal-ion crosslinking polymer binders provides a new pathway for high-performance binders in next-generation rechargeable batteries.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Engineering, Environmental

Photo-Initiated in situ synthesis of polypyrrole Fe-Coated porous silicon microspheres for High-performance Lithium-ion battery anodes

Zeyu Xu et al.

Summary: A simple and environmentally friendly photoinitiated fabrication approach is designed to synthesize yolk-shell like polypyrrole-iron coated porous silicon microspheres (PSi@PPy-Fe) as anode materials for LIBs based on the photoelectric effect of semiconductor silicon. The polymerization of pyrrole monomers only occurs on the interface of silicon matrix where the vacancies are available, effectively avoiding the production of free PPy-Fe particles. XPS and first-principles calculations reveal the formation of hydrogen-bond interaction and covalent linkage between Si and PPy-Fe layer, which is important for maintaining good contact and strengthening structure stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Ion-Conducting Cross-Linked Polyphosphazene Binders for High- Performance Silicon Anodes in Lithium-Ion Batteries

Dong Gi Hong et al.

Summary: A cross-linked polyphosphazene-based polymeric material was prepared as a binder for a silicon (Si) anode in lithium-ion batteries. The resulting binder exhibited improved battery performance due to its composite structure, which provided enhanced electrode stability and ion transfer conductivity.

ACS APPLIED POLYMER MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

What Drives the Kinetics and Doping Level in the Electrochemical Reactions of PEDOT:PSS?

Gonzague Rebetez et al.

Summary: The study investigated the electrochemical dedoping and redoping processes of a thin PEDOT:PSS film in an electrolyte, revealing that these processes are sequential and occur within a few hundred milliseconds. Evaluation of the temperature-dependence with different formalisms highlighted the role of entropy in the reaction equilibrium and rates.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Studies on the preparation and electrochemical performance of PSi@Poly(3, 4-ethylenedioxythiophene) composites as anode materials for lithium-ion batteries

Rui Li et al.

Summary: In this study, porous silicon (PSi) was coated with a conductive polymer to prepare PSi@poly(3,4-ethylenedioxythiophene) (PSi@PEDOT) composites. The PEDOT shell ensures the conductive network and inhibits silicon volume expansion, while the pores inside the PSi material's core layer provide space gaps to buffer the volume expansion. The composite material exhibits excellent cycling stability.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchically Structured Conductive Polymer Binders with Silver Nanowires for High-Performance Silicon Anodes in Lithium-Ion Batteries

Jaewon Kim et al.

Summary: This study addresses the issue of capacity decrease and short cycle life in silicon anodes in lithium-ion batteries by using a conductive binder, a composite material structure, and introducing a polymer binder and a silver nanowire network to enhance the specific capacity and rate capability of silicon anodes.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

Incorporation of aniline tetramer into alginate-grafted-polyacrylamide as polymeric binder for high-capacity silicon/graphite anodes

Bolormaa Gendensuren et al.

Summary: In this study, a new design on polymeric binder is proposed for high-capacity silicon anodes, which improves the performance of silicon/graphite composite electrodes by adding conductive aniline oligomers. The experimental results demonstrate that this design significantly enhances the cyclic stability of silicon-based anodes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Key Factors for Binders to Enhance the Electrochemical Performance of Silicon Anodes through Molecular Design

Haoli Wang et al.

Summary: Silicon is considered a promising anode material for lithium-ion batteries due to its high theoretical capacity, but its application is limited by vast volume change and low electrical conductivity. In the silicon anode system, binders play a crucial role in mechanical performance and conductive integrity. This review summarizes key factors affecting binders' performance and provides commonly used modification methods to improve binder performance.

SMALL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Metal-organic framework/conductive polymer hybrid materials for supercapacitors

Ivan Dedek et al.

Summary: This review article focuses on supercapacitor electrode materials based on composites of metal-organic frameworks (MOFs) and conductive polymers (CPs). The combination of MOFs and CPs is an effective strategy to enhance the electrochemical performance of electrode materials. MOFs have unique properties such as high porosity and large surface area, but their low electrical conductivity limits their energy storage applications. CPs, on the other hand, have controllable conductivity and mechanical properties, making them attractive for supercapacitor applications. The review discusses hybridization strategies and provides a summary of recent advances in MOF@CP hybrids.

APPLIED MATERIALS TODAY (2022)

Add to Collection

Article Chemistry, Physical

Bio-Inspired Binder Design for a Robust Conductive Network in Silicon-Based Anodes

Zhibo Song et al.

Summary: In this study, a bio-inspired conductive binder (PFPQDA) was designed by introducing dopamine-functionalized fluorene structure units into a conductivity enhanced polyfluorene-typed copolymer, which successfully suppressed electrode expansion and maintained the integrity of conductive pathways. As a result, Si-based anodes exhibited improved cycling performance and rate capability.

SMALL METHODS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Establishing a Resilient Conductive Binding Network for Si-Based Anodes via Molecular Engineering

Shiming Chen et al.

Summary: The article introduces the key role of binders in maintaining the integrity of the conductive network in high-capacity silicon-based anodes and systematically summarizes the optimization strategies and design principles to achieve a robust conductive network.

ACCOUNTS OF CHEMICAL RESEARCH (2022)

Add to Collection

Article Engineering, Multidisciplinary

Insights on polymeric materials for the optimization of high-capacity anodes

Jingwei Wang et al.

Summary: The demand for high energy density rechargeable batteries has led to the need for optimizing the anodes such as Li metal, Si, and Zn metal. However, these anodes face challenges such as dendrite growth and volume change. Functional polymers have shown promising results in optimizing these anodes, but the working mechanism and design basis of these polymers are not well understood. This review comprehensively discusses the modification strategies, mechanisms, and progress of functional-polymers-modified Li metal, Si, or Zn metal, and provides future development directions for high energy density batteries.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Electrochemistry

Vulcanized polyisoprene-graft-maleic anhydride as an efficient binder for silicon anodes in lithium-ion batteries

Satish Bolloju et al.

Summary: This study investigates the use of vulcanized polyisoprene-graft-maleic anhydride (VPI-g-MA) as an in situ cross-linked binder for silicon (Si) anodes. The VPI-g-MA binder was found to significantly enhance the cycle-life performance of the Si anodes, exhibiting high initial charge capacity and improved adhesion strength compared to other binders. Scanning electron microscopy images confirmed the ability of the VPI-g-MA binder to maintain the integrity of the Si electrode throughout the cycling process.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Chemistry, Physical

Constructing an artificial boundary to regulate solid electrolyte interface formation and synergistically enhance stability of nano-Si anodes

Chunyue Zhou et al.

Summary: By constructing a multifunctional polypyrrole protective layer on the surface of silicon nanoparticles, the cycling performance and initial coulombic efficiency of nano-silicon anodes can be effectively improved. The artificial boundary protection inhibits the Li salt decomposition reaction and reduces the amount of SEI film, leading to a high ICE and reversible capacity for the modified nano-Si anodes.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Review Polymer Science

Fluorene based electrochromic conjugated polymers: A review

Buket Bezgin Carbas

Summary: This review provides a brief description of electrochromic conductive polymers containing fluorene, focusing on their chemical, electrochemical, and optical properties. Understanding the effects of the position of functional groups on the conjugated polymer chain is crucial for researchers in this field.

POLYMER (2022)

Add to Collection

Article Chemistry, Physical

Intermolecular chemistry for designing functional binders in silicon/ carbon composite anodes

Zhibo Song et al.

Summary: This review summarizes recent advances in functional polymers for silicon/carbon composite anode, focusing on the relationship between structural units and binder performance.

MATERIALS TODAY ENERGY (2022)

Add to Collection

Review Chemistry, Physical

Design Criteria for Silicon-Based Anode Binders in Half and Full Cells

Li Deng et al.

Summary: This review discusses the challenges in the industrialization of silicon anodes and the recent advances in binder design strategies. The silicon anode places higher demands on the binder, requiring it to maintain contact between electrode components and the integrity of ion and electron transport channels during charging and discharging. The challenges and future development direction of innovative polymer binders for silicon anodes are explored.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Energy & Fuels

Recent development and prospective of carbonaceous material, conducting polymer and their composite electrode materials for supercapacitor-A review

Elumalai Dhandapani et al.

Summary: This article discusses the recent developments in active electrode materials in supercapacitors, focusing on the applications of carbonaceous materials and conducting polymers in this field.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Free-Standing Polyaniline/Silicon Nanowire Forest as the Anode for Lithium-ion Batteries

Calvin Eldona et al.

Summary: In this study, a dense 1D polyaniline/silicon nanowire forest electrode is fabricated through facile metal-assisted chemical etching and in-situ polymerization of aniline. This hybrid electrode shows high cycling performance and stable capacity at various charge-discharge rates due to the reduction in solid electrolyte interface resistance and the increased conductivity.

CHEMISTRY-AN ASIAN JOURNAL (2022)

Add to Collection

Article Electrochemistry

The development of super electrically conductive Si material with polymer brush acid and emeraldine base and its auto-switch design for high-safety and high-performance lithium-ion battery

Alem Gebrelibanos Hailu et al.

Summary: Silicon is a promising anode material for lithium-ion batteries due to its high capacity and low cost. However, its volume changes and low electrical conductivity affect its stability and performance. In this study, a super electrically conductive (SEC) Si material was developed using a polymer brush and emeraldine base. The SEC Si electrode exhibited improved conductivity, reduced charge transfer resistance, and maintained high mechanical properties. It delivered high initial capacity, high coulombic efficiency, and excellent rate performance without the need for carbon/graphite composites or electrolyte additives. The SEC layer also provided a switch function by neutralizing the local pH, increasing the interfacial impedance. This new designed Si material has the potential to enhance the life, energy density, and safety of lithium-ion batteries.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Electrochemistry

Covalently Bonded Ball-Milled Silicon/CNT Nanocomposite as Lithium-Ion Battery Anode Material

Pierre Yosia Edward Koraag et al.

Summary: In this study, a composite of silicon particles and carbon nanotubes (CNTs) was synthesized through a simple two-step mechanical ball milling method. The composite showed a strong interaction between silicon particles and CNTs, resulting in improved performance for lithium-ion batteries. The composite exhibited a first cycle Coulombic efficiency of 98.06% and retained 71.28% of its capacity after 100 cycles. It also demonstrated good rate capability at different current densities.

BATTERIES-BASEL (2022)

Add to Collection

Article Electrochemistry

Water-Soluble Conductive Composite Binder for High-Performance Silicon Anode in Lithium-Ion Batteries

Zikai Li et al.

Summary: The study develops a novel water-soluble bifunctional binder composed of a conductive polythiophene polymer and high-adhesive polyacrylic acid, which can solve the issues caused by huge volume changes of high-capacity anodes and insufficient electrical contact. The composite binder provides an integral conductive network and an integral electrode structure, resulting in stable electrochemical performance for high-capacity anodes in high-energy batteries.

BATTERIES-BASEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

DLP printing of a flexible micropattern Si/PEDOT:PSS/PEG electrode for lithium-ion batteries

Xinliang Ye et al.

Summary: A free-standing 3D-printed Si/PEDOT:PSS/PEG electrode based on silicon nanoparticles was fabricated via digital light processing (DLP) for lithium-ion batteries. Compared with traditional methods, the 3D-printed electrode showed higher capacity retention and flexibility, demonstrating the potential of 3D printing in LIB technologies.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Energy & Fuels

Colloidal polypyrrole as binder for silicon anode in lithium ion batteries

Isik Ipek Avci Yayla et al.

Summary: This study successfully addresses the contact issue caused by volume change in Si-based anodes by using synthesized conductive colloidal polypyrrole (Col-PPy) and Si nanoparticles (SiNP) to prepare Col-PPy/SiNP composite. The composite shows promising cycling performance and reversible capacity in lithium ion batteries.

ENERGY STORAGE (2022)

Add to Collection

Article Electrochemistry

Understanding Component-Specific Contributions and Internal Dynamics in Silicon/Graphite Blended Electrodes for High-Energy Lithium-Ion Batteries

Christian Heubner et al.

Summary: Blended electrode materials containing high-capacity silicon and robust graphite are considered as advanced alternatives to pure graphite electrodes in Li-ion batteries. This study introduces a Si/Gr blended electrode and special electrochemical cell to directly capture component-specific behaviors, providing fundamental insights for understanding and optimizing blended electrodes. The experimental approach presented here can also be applied to identify and study other advanced materials combinations for rechargeable batteries.

BATTERIES & SUPERCAPS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Yuanyuan Yu et al.

Summary: A novel n-type conductive polymer binder has been successfully designed and applied to address the issue of cracks and fractures in silicon microparticles during the electrochemical cycle in lithium-ion batteries. By fine-tuning the monomer ratio, the ionic and electronic conductivities of the polymer can be precisely controlled, leading to improved cycling performance.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Review Nanoscience & Nanotechnology

Electrospun Nanofibers for Quartz Crystal Microbalance Gas Sensors: A Review

Aditya Rianjanu et al.

Summary: Electrospun nanofibers made of various materials have been studied for use in gas sensors, with the quartz crystal microbalance (QCM) being a favored platform for its mature technology and low-cost production. These nanofibers possess unique porous structures that contribute to their high sensitivity and selectivity in gas sensing applications.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Graphene-encapsulated blackberry-like porous silicon nanospheres prepared by modest magnesiothermic reduction for high-performance lithium-ion battery anode

Ben Xiang et al.

Summary: This study demonstrates a method to produce blackberry-like porous silicon nanospheres controllably using a magnesiothermic reduction reaction, providing better control of kinetics and heat release compared to traditional methods. The resulting porous silicon material has higher structural integrity, and the encapsulated composite shows superior cycling stability and rate performance.

RARE METALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Improving the Electrochemical Property of Silicon Anodes through Hydrogen-Bonding Cross-Linked Thiourea-Based Polymeric Binders

Wen-Feng Ren et al.

Summary: In this study, hydrogen-bonding cross-linked thiourea-based polymeric binders (denoted CMC-co-SN) were designed and prepared for Si anodes. These binders, formed through in situ thermopolymerization, create a tight and physical interlocked layer with the Cu current collector, significantly improving the electrochemical performance of Si anodes by enhancing binding forces and maintaining electrode integrity. The results show high initial Coulomb efficiency and excellent cyclability for both micro- and nano-sized Si particles when using these binders.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Poly(3,4-ethylenedioxythiophene) (PEDOT) as promising thermoelectric materials and devices

Yuwei Xu et al.

Summary: Conducting polymers, as an important environmentally friendly energy conversion material, have rich sources, low cost, good mechanical flexibility, and other advantages. In recent years, they have attracted increasing attention in the field of organic thermoelectric applications and made significant progress.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Polymer Science

Synthesis and factor affecting on the conductivity of polypyrrole: a short review

Ai Ling Pang et al.

Summary: The article comprehensively elaborates on the methods used to synthesize conductive Polypyrrole (PPy) and the important factors affecting its conductivity, highlighting the importance of controlling microstructural features to adjust PPy conductivity. Despite extensive research, no previous study has presented all possible relevant information about PPy fabrication and the key factors influencing its electrical conductivity.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Add to Collection

Review Chemistry, Physical

Sustainable Li-Ion Batteries: Chemistry and Recycling

Jedrzej Piatek et al.

Summary: The commercial success of Li-ion batteries in the 1990s has led to environmental hazards from disposed batteries, raising questions about the greenness of current recycling technologies. Although industrially applied recycling technologies may have high overall efficiency, they often lack true circularity principles, which calls for a shift towards more sustainable and energy-efficient processes in the recycling of LIBs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Chemical Coupled PEDOT:PSS/Si Electrode: Suppressed Electrolyte Consumption Enables Long-Term Stability

Xuejiao Liu et al.

Summary: The incorporation of GOPS in Si/PEDOT:PSS electrodes improved the interface compatibility between Si and PEDOT:PSS, leading to the formation of a stable artificial SEI. The optimized electrode showed enhanced cycling performance and rate capability, maintaining 1000 mAh g(-1) for nearly 800 cycles under limited electrolyte. The full battery assembled with NCM 523 cathode achieved a high energy density of 520 Wh kg(-1) and exhibited good stability.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Chemistry, Analytical

Conducting polymer/graphene hydrogel electrodes based aqueous smart Supercapacitors: A review and future prospects

Shahid Bashir et al.

Summary: Conducting polymer hydrogels have emerged as a promising source for fabricating flexible supercapacitors and powering up flexible electronic devices, due to their unique combination of high electrical conductivity, outstanding electrochemical characteristics, and swellable three-dimensional porous morphology. Conducting polymers like PPy, PANI, and PEDOT:PSS are significant contributors in supercapacitors, especially when used in composite with graphene hydrogel to create conducting hydrogels for highly efficient and stable flexible supercapacitors. Future research may focus on developing conducting hydrogels with controllable size, morphology, and electrochemical characteristics to advance smart and flexible supercapacitors and promote wearable electronics.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Side-Chain Engineering for High-Performance Conjugated Polymer Batteries

Xiaoyi Li et al.

Summary: The study shows that by incorporating ethylene glycol side chains, the electrochemical performance of conjugated polymer electrodes can be significantly improved, especially in thick electrodes, demonstrating higher rate performance and capacity. This work provides a pathway for enhancing the rate of ion transport in conjugated polymers and improving the performance and capacity of conjugated-polymer-based electrodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Engineering, Environmental

Towards efficient binders for silicon based lithium-ion battery anodes

Yajun Yang et al.

Summary: This review provides a comprehensive analysis of existing and emerging binders for Si-based LIB anodes in terms of their structures, properties, advantages, limitations, working principles, design rules, and associated electrochemical mechanisms. It also offers a perspective on current challenges and research directions for commercializing Si-based anodes in the near future.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Chemistry, Physical

A review of rational design and investigation of binders applied in silicon-based anodes for lithium-ion batteries

Shi Li et al.

Summary: The review systematically summarizes the synthesis methods, design principles, and working mechanisms of synthetic binders and natural biomass binders, including chemical composition, superstructure, and various interactions between different functional moieties. These findings aim to reveal the structure-composition-performance relationship, offer practical solutions to challenging problems associated with defects of Si-based electrode materials in LIBs, and provide design principles for other electrode binders in rechargeable batteries at an industrial level.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Multidisciplinary Sciences

Versatilely tuned vertical silicon nanowire arrays by cryogenic reactive ion etching as a lithium-ion battery anode

Andam Deatama Refino et al.

Summary: The production of high-aspect-ratio silicon nanowire-based anode for lithium ion batteries is challenging and requires the optimization of several etching parameters. Different materials were used as masks to investigate their effects on resulting nanowire structures. Raman spectroscopy revealed higher compressive stress in longer Si wires, and anisotropy of lattice stress was found in Si nanowires. The half-cell battery integrating ICP-RIE-based silicon nanowire anode exhibited a certain capacity but needs further improvement.

SCIENTIFIC REPORTS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Polythiophene and its derivatives -Based nanocomposites in electrochemical sensing: A mini review

Hanaa H. AL-Refai et al.

Summary: Conducting polymer nanocomposites combine the advantages of conducting polymers and organic/inorganic nanoparticles, making them useful for a variety of applications. This review focuses on the fundamental synthesis methods for nanocomposite material-based polythiophene and its derivatives, highlighting their enhanced electrochemical sensor performance compared to sensors without nanocomponents. Analytical performance of modified electrodes for different targets is summarized and compared over the past 5 years.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Physical

Diverting Exploration of Silicon Anode into Practical Way: A Review Focused on Silicon-Graphite Composite for Lithium Ion Batteries

Peng Li et al.

Summary: This review highlights the necessity of co-exploitation of silicon and graphite, and systematically concludes the key issues, challenges, and perspectives of Si-graphite electrodes. Through a deep understanding of associated electrochemical processes, the component and structural optimization of Si-graphite anodes could be effectively enhanced.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Vertically Aligned n-Type Silicon Nanowire Array as a Free-Standing Anode for Lithium-Ion Batteries

Andika Pandu Nugroho et al.

Summary: This study successfully improved the performance of silicon anodes by fabricating a vertically aligned n-type silicon nanowire array, which showed higher initial Coulombic efficiency and better cycle stability compared to traditional silicon wafers. The potential of n-SiNW anodes for high current density applications was demonstrated, presenting a practical alternative for high precision patterning on a wafer-scale.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Physical

In Situ Measurement of Ionic and Electronic Conductivities of Conductive Polymers as a Function of Electrochemical Doping in Battery Electrolytes

Billal Zayat et al.

Summary: Through impedance spectroscopy on interdigitated electrodes with a range of conducting polymer thin films in relevant battery electrolytes, researchers have successfully and reliably measured changes in electronic and ionic conductivity, demonstrating the broad applicability of the methodology for gaining insights into the electrical conduction in polymers in relevant environments, particularly for batteries and other electrochemical devices.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Binary Network of Conductive Elastic Polymer Constraining Nanosilicon for a High-Performance Lithium-Ion Battery

Yongxiang Su et al.

Summary: A multifunctional polymeric binder synthesized from conducting polymer and stretchable polymer is capable of forming a three-dimensional network beneficial for electron transfer and mechanical stability, while also being elastic and adhesive to accommodate the huge volume change of silicon. This binder, with high conductivity, elasticity, and self-healing properties, shows enhanced cycling stability and rate performance for nanosilicon anode, making it a promising option for high performance lithium-ion batteries.

ACS NANO (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Amorphous porous germanium anode with variable dimension for lithium ion batteries

Xianhua Sheng et al.

Summary: Amorphous porous germanium prepared by polystyrene template-assited ionic liquid electrodeposition shows promising performance as an anode material in lithium batteries, with superior charge transfer compared to 2D porous Ge.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Micro-sized porous silicon@PEDOT with high rate capacity and stability for Li-ion battery anode

Shuangfu Li et al.

Summary: By coating poly (3, 4-ethylenedioxythiophene) (PEDOT) on the surface of micro-Si, a porous micro-Si anode was successfully synthesized with excellent performance in lithium ion batteries. The synergistic effect of porous structure and PEDOT protective layer not only helps alleviate volume expansion of silicon, but also enhances its conductivity. This study provides an attractive strategy to address volume expansion and low conductivity issues in silicon anodes, which is significant for the development of high energy density LIBs.

MATERIALS LETTERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Advances in multimetallic alloy-based anodes for alkali-ion and alkali-metal batteries

Xin Wang et al.

Summary: Alloying anodes are gaining interest for high-performance alkalimetal-ion batteries due to their high specific capacities, low working voltages, and natural abundance. However, challenges such as unsatisfactory cycle life due to violent volumetric and structural changes have led to the development of multimetallic anodes that can accommodate induced strain for high Coulomb efficiency and long cycle life. Efforts have also been made to understand structural changes and reaction mechanisms through in-situ characterization methodologies.

MATERIALS TODAY (2021)

Add to Collection

Article Materials Science, Coatings & Films

Reviving of silicon waste with N-doped carbon core-shell structure prepared by vapor deposition polymerization of polypyrrole applied in lithium-ion battery

Che-Ya Wu et al.

Summary: In this study, waste silicon from the photovoltaic industry is reused as anode materials, and polypyrrole's vapor deposition polymerization is used as the N-doped carbon source to enhance the battery's performance. The Si/N-doped carbon sample demonstrates improved electrochemical performance, showing higher capacity and stability in cycling tests.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Review Polymer Science

Preparations, Properties, and Applications of Polyaniline and Polyaniline Thin Films-A Review

Mahnoush Beygisangchin et al.

Summary: Polyaniline (PANI) is a well-known conductive polymer that has attracted significant attention in the field of nanotechnology. This review focuses on the preparation processes and various properties of PANI thin films, discussing its potential applications in electronics, drugs, and anti-corrosion materials. PANI's unique characteristics, such as high conductivity, easy synthesis, and environmental stability, make it a promising material for a wide range of applications.

POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery

Qiushi Wang et al.

Summary: The study proposes a new method to stabilize silicon by successive chemical bond reconstruction, assembling silicon nanoparticles in a carbon-copper framework to provide short-range electron transfer and pulverization suppression, achieving high performance and stability in lithium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

The renaissance of polythiophene organic solar cells

Long Ye et al.

Summary: In the past decade, there have been significant advancements in the power conversion efficiency of organic photovoltaic cells, with polythiophenes showing great promise. Optimizing the structure and performance of polythiophenes in solar cells can drive progress in cost-effective electronics.

TRENDS IN CHEMISTRY (2021)

Add to Collection

Review Chemistry, Physical

Advances of the top-down synthesis approach for high-performance silicon anodes in Li-ion batteries

Ansor Prima Yuda et al.

Summary: Silicon anodes have high theoretical specific capacity but face challenges in commercial application due to intrinsic and extrinsic problems. Top-down methods offer a simple and controllable manufacturing process. Research aims to explore the synthesis and electrochemical performance of silicon anodes.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tuning Electronic and Ionic Conductivities in Composite Materials for Electrochemical Devices

Nerea Casado et al.

Summary: The research introduces a composite material based on PEDOT-Cl and an organic ionic plastic crystal that can provide both electronic and ionic conduction as well as redox functionality; the composite exhibits enhanced electronic and ionic conductivities compared to the pure components.

ACS APPLIED POLYMER MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Interpenetrating gels as conducting/adhering matrices enabling high-performance silicon anodes

Tingting Xia et al.

Summary: Introducing adhesive polymer networks into conductive polymer networks to form interpenetrating gels results in greatly enhanced mechanical stretchability and chemical interactions with active materials. The gel-based 3D conductive pathway and adhesive network provide markedly enhanced cycling stability and rate capability for electrode materials.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Thermally Stable and Solvent-Resistant Conductive Polymer Composites with Cross-Linked Siloxane Network

Zhifan Ke et al.

Summary: This study reports a method for designing stable-conductive polymer composites that can maintain their conductivity at high temperature and in harsh conditions. These composites exhibit excellent solvent resistance and can retain their conductivity even after prolonged baking at high temperatures.

ACS APPLIED POLYMER MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Advances of polymer binders for silicon-based anodes in high energy density lithium-ion batteries

Yu-Ming Zhao et al.

Summary: Polymer binders play a critical role in alleviating volume expansion and maintaining the integrity and stable cycling of Si-based anodes, contributing to the practical application of high-capacity anodes in lithium-ion batteries.

INFOMAT (2021)

Add to Collection

Article Chemistry, Physical

Mechanically robust and superior conductive n-type polymer binders for high-performance micro-silicon anodes in lithium-ion batteries

Yuanyuan Yu et al.

Summary: This study developed a series of novel n-type conductive polymer binders (CPBs) for SiMP anodes in lithium-ion batteries, demonstrating extraordinary electrochemical performance due to their superior properties. These designed polymers show excellent ionic and electronic conductivity in the n-doping state, filling a current research gap in the field and providing possibilities for preparing high-performance SiMP batteries. Furthermore, the high conductivity of b-POD binder shows better cycling performance and excellent fast-charging ability compared to non-conductive binders, enhancing the practical applications of SiMP batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications

K. Namsheer et al.

Summary: Conducting polymers are extensively studied for their outstanding properties and limitations in their pristine form can be overcome through hybridization with other materials. The synergetic effects of conducting polymer composites find wide applications in electrical, electronics, and optoelectronic fields. Understanding the transport models and physical properties of these composites is crucial for their various applications in fields like energy storage, photocatalysis, and biomedical applications.

RSC ADVANCES (2021)

Add to Collection

Article Polymer Science

Novel approach with polyfluorene/polydisulfide copolymer binder for high-capacity silicon anode in lithium-ion batteries

Emrah Bulut et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

A conductive self-healing hydrogel binder for high-performance silicon anodes in lithium-ion batteries

Shanming Hu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Electro-performance of functionalized silicon nanowires by conductive polymer-coated with gold nanoparticles

Fatma Zaibi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Add to Collection

Article Electrochemistry

Chitosan-grafted-polyaniline copolymer as an electrically conductive and mechanically stable binder for high-performance Si anodes in Li-ion batteries

K. K. Rajeev et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Engineering, Chemical

Molecularly Engineered Conductive Polymer Binder Enables Stable Lithium Storage of Si

Xiaoying He et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Progress in understanding structure and transport properties of PEDOT-based materials: A critical review

Magatte N. Gueye et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Research Progress on Applications of Polyaniline (PANI) for Electrochemical Energy Storage and Conversion

Zhihua Li et al.

MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Ion-Cross-Linking-Promoted High-Performance Si/PEDOT:PSS Electrodes: The Importance of Cations' Ionic Potential and Softness Parameters

Xuejiao Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Engineering, Environmental

Toward understanding the interaction within Silicon-based anodes for stable lithium storage

Rana Zafar Abbas Manj et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Polymer Science

Research Progress on Polymer Solar Cells Based on PEDOT:PSS Electrodes

Lin Hu et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Lithium Ion Batteries Combining Submicron Silicon and Thiophene-Terephthalic Acid-Conjugated Polymer Binders

Kuo-Lung Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Review Energy & Fuels

Effect of Combined Conductive Polymer Binder on the Electrochemical Performance of Electrode Materials for Lithium-Ion Batteries

Svetlana N. Eliseeva et al.

ENERGIES (2020)

Add to Collection

Article Electrochemistry

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon-Based Lithium-Ion Battery Anode

Ruixian Tang et al.

CHEMELECTROCHEM (2020)

Add to Collection

Article Chemistry, Physical

Glycerol-crosslinked PEDOT:PSS as bifunctional binder for Si anodes: Improved interfacial compatibility and conductivity

Xuejiao Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Review Chemistry, Analytical

PEDOT:PSS-Based Conductive Textiles and Their Applications

Granch Berhe Tseghai et al.

SENSORS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Tailoring PEDOT properties for applications in bioelectronics

Mary J. Donahue et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)

Add to Collection

Article Chemistry, Physical

Ultra-efficient polymer binder for silicon anode in high-capacity lithium-ion batteries

Shilun Gao et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Coral-like PEDOT Nanotube Arrays on Carbon Fibers as High-Rate Flexible Supercapacitor Electrodes

Fei Niu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Uncovering the Chemistry of Cross-Linked Polymer Binders via Chemical Bonds for Silicon-Based Electrodes

Zhou Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Interconnected conductive gel binder for high capacity silicon anode for Li-ion batteries

Omer S. Taskin et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Composites

Preparation and characterization of polyaniline- and polythiophene-based copolymer and its nanocomposite suitable for electro-optical devices

Susmita Dey Sadhu et al.

POLYMER COMPOSITES (2020)

Add to Collection

Review Chemistry, Physical

A Review of the Design of Advanced Binders for High-Performance Batteries

Feng Zou et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Polymer Science

Conductive Polyaniline Doped with Dodecyl Benzene Sulfonic Acid: Synthesis, Characterization, and Antistatic Application

Cheng-Ho Chen et al.

POLYMERS (2020)

Add to Collection

Review Chemistry, Physical

Progress of 3D network binders in silicon anodes for lithium ion batteries

Anjali N. Preman et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Conductive polyaniline doped with phytic acid as a binder and conductive additive for a commercial silicon anode with enhanced lithium storage properties

Chengkun Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Physical

Molecular design principles for polymeric binders in silicon anodes

Andrea Miranda et al.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Hollow-structure engineering of a silicon-carbon anode for ultra-stable lithium-ion batteries

Hongbin Liu et al.

DALTON TRANSACTIONS (2020)

Add to Collection

Review Electrochemistry

Review-Conducting Polymer-Based Binders for Lithium-Ion Batteries and Beyond

Van At Nguyen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Chitosan-grafted-poly(aniline-co-anthranilic acid) as a water soluble binder to form 3D structures for Si anodes

Eunsoo Kim et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon free silicon/polyaniline hybrid anodes with 3D conductive structures for superior lithium-ion batteries

Jun Zhou et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Review Chemistry, Physical

Internal failure of anode materials for lithium batteries - A critical review

Xiangqi Meng et al.

GREEN ENERGY & ENVIRONMENT (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Platinum electrode modified with polyterthiophene doped with metallic nanoparticles, as sensitive sensor for the electroanalysis of ascorbic acid (AA)

Naima Maouche et al.

ARABIAN JOURNAL OF CHEMISTRY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Confronting the Challenges of Next-Generation Silicon Anode-Based Lithium-Ion Batteries: Role of Designer Electrolyte Additives and Polymeric Binders

Gebrekidan Gebresilassie Eshetu et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Electrochemistry

Hierarchical void structured Si/PANi/C hybrid anode material for high-performance lithium-ion batteries

Ge Mu et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Polymer Science

A novel route to synthesis polythiophene with great yield and high electrical conductivity without post doping process

David Thanasamy et al.

POLYMER (2019)

Add to Collection

Article Multidisciplinary Sciences

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Weili An et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Electropolymerization of Molecular-Sieving Polythiophene Membranes for H2 Separation

Mengxi Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Silicon @ nitrogen-doped porous carbon fiber composite anodes synthesized by an in-situ reaction collection strategy for high-performance lithium-ion batteries

Yue Ouyang et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Electrochemistry

Analysis of the effect of applying external mechanical pressure on next generation silicon alloy lithium-ion cells

Gert Berckmans et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Electrochemistry

A water-soluble binary conductive binder for Si anode lithium ion battery

Mengdan Zheng et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Polymer Science

Aqueous emulsion of conductive polymer binders for Si anode materials in lithium ion batteries

Tianyue Zheng et al.

EUROPEAN POLYMER JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Intersystem Subpopulation Charge Transfer and Conformational Relaxation Preceding in Situ Conductivity in Electrochemically Doped Poly(3-hexylthiophene) Electrodes

Jonathan K. Harris et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Largely Improved Battery Performance Using a Microsized Silicon Skeleton Caged by Polypyrrole as Anode

Yingying Lv et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Physical

Toward a durable solid electrolyte film on the electrodes for Li-ion batteries with high performance

Weimin Zhao et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Electrically Conductive Shell-Protective Layer Capping on the Silicon Surface as the Anode Material for High-Performance Lithium-Ion Batteries

Ruiqi Na et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A Comprehensive Study of Hydrolyzed Polyacrylamide as a Binder for Silicon Anodes

Andrea Miranda et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Boosting electrochemical performance of electrospun silicon-based anode materials for lithium-ion battery by surface coating a second layer of carbon

Shuwu Liu et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Spectroscopy

Study of redox and protonation processes of polyaniline by the differential multiwavelength Raman spectroelectrochemistry

Regina Mazeikiene et al.

SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Surface-Bound Silicon Nanoparticles with a Planar-Oriented N-Type Polymer for Cycle-Stable Li-Ion Battery Anode

Jingmin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Electrode Design from Internal to External for High Stability Silicon Anodes in Lithium-Ion Batteries

Shaowei Qi et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Towards high energy density lithium battery anodes: silicon and lithium

Bin Zhu et al.

CHEMICAL SCIENCE (2019)

Add to Collection

Review Chemistry, Physical

Si anode for next-generation lithium-ion battery

Wen-Feng Ren et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2019)

Add to Collection

Review Chemistry, Physical

Engineering of carbon and other protective coating layers for stabilizing silicon anode materials

Fenglin Wang et al.

CARBON ENERGY (2019)

Add to Collection

Article Energy & Fuels

Highly efficient poly(fluorene phenylene) copolymer as a new class of binder for high-capacity silicon anode in lithium-ion batteries

Neslihan Yuca et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Add to Collection

Review Energy & Fuels

The progress of novel binder as a non-ignorable part to improve the performance of Si-based anodes for Li-ion batteries

Shu Huang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Add to Collection

Review Chemistry, Multidisciplinary

The emerging era of supramolecular polymeric binders in silicon anodes

Tae-woo Kwon et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Article Chemistry, Physical

The Role of the Side Chain on the Performance of N-type Conjugated Polymers in Aqueous Electrolytes

Alexander Giovannitti et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Electrochemistry

Poly(aniline-co-anthranilic acid) as an electrically conductive and mechanically stable binder for high-performance silicon anodes

Kukjoo Lee et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

SWNT Anchored with Carboxylated Polythiophene Links on High-Capacity Li-Ion Battery Anode Materials

Yo Han Kwon et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Silicon-Based Anodes for Lithium-Ion Batteries: From Fundamentals to Practical Applications

Kun Feng et al.

SMALL (2018)

Add to Collection

Article Chemistry, Physical

Enhanced Ion Conductivity in Conducting Polymer Binder for High-Performance Silicon Anodes in Advanced Lithium-Ion Batteries

Wenwu Zeng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Sandwich-like CNTs/Si/C nanotubes as high performance anode materials for lithium-ion batteries

Ruiping Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Conductive Binder for Si Anode with Boosted Charge Transfer Capability via n-Type Doping

Yan Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices

Hao Chen et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Article Multidisciplinary Sciences

High electrical conductivity and carrier mobility in oCVD PEDOT thin films by engineered crystallization and acid treatment

Xiaoxue Wang et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Chemistry, Physical

Regioregularity and Molecular Weight Effects in Redox-Active Poly(3-hexylthiophene)-block-poly(ethylene oxide) Electrode Binders

Hyosung An et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Review Polymer Science

Anisotropies and the thermoelectric properties of semiconducting polymers

Shrayesh N. Patel et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Nanostructured Conductive Polymer Gels as a General Framework Material To Improve Electrochemical Performance of Cathode Materials in Li-Ion Batteries

Ye Shi et al.

NANO LETTERS (2017)

Add to Collection

Article Engineering, Chemical

High surface area C/SiO2 composites from rice husks as a high-performance anode for lithium ion batteries

Jinlong Cui et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of one-dimensional poly(3,4-ethylenedioxythiophene)-graphene composites for the simultaneous detection of hydroquinone, catechol, resorcinol, and nitrite

Fangyuan Tian et al.

SYNTHETIC METALS (2017)

Add to Collection

Review Polymer Science

Electrical and Electrochemical Properties of Conducting Polymers

Thanh-Hai Le et al.

POLYMERS (2017)

Add to Collection

Review Chemistry, Physical

Silicon based lithium-ion battery anodes: A chronicle perspective review

Xiuxia Zuo et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Novel conductive binder for high-performance silicon anodes in lithium ion batteries

Dong Liu et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Outlook on Lithium Ion Battery Technology

Arumugam Manthiram

ACS CENTRAL SCIENCE (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Mechanical Properties of Organic Semiconductors for Stretchable, Highly Flexible, and Mechanically Robust Electronics

Samuel E. Root et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Core-Shell Coating Silicon Anode Interfaces with Coordination Complex for Stable Lithium-Ion Batteries

Jinqiu Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Review on recent advances in polythiophene based photovoltaic devices

Umer Mehmood et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Side-Chain Conducting and Phase-Separated Polymeric Binders for High-Performance Silicon Anodes in Lithium-Ion Batteries

Sang-Jae Park et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Hierarchical electrode design of high-capacity alloy nanomaterials for lithium-ion batteries

Hui Zhao et al.

NANO TODAY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Binding of Polypyrrole on Porous Silicon Hollow Nanospheres for Li-Ion Battery Anodes with High Structure Stability

Fei-Hu Du et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Materials Science, Ceramics

Potentiostatically deposited polypyrrole/graphene decorated nano-manganese oxide ternary film for supercapacitors

Y. S. Lim et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Electrochemistry

Polyaniline encapsulated silicon nanocomposite as high-performance anode materials for lithium ion batteries

Hua-Chao Tao et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2014)

Add to Collection

Review Polymer Science

Wettability of conducting polymers: From superhydrophilicity to superoleophobicity

Thierry Darmanin et al.

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Review Chemistry, Physical

Silicon-Based Nanomaterials for Lithium-Ion Batteries: A Review

Xin Su et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneous Electronic and Ionic Conduction in a Block Copolymer: Application in Lithium Battery Electrodes

Anna E. Javier et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Add to Collection

Article Polymer Science

Synthesis, Nanostructure, Functionality, and Application of Polyfluorene-block-poly(N-isopropylacrylamide)s

Yanqing Tian et al.

MACROMOLECULES (2010)

Add to Collection

Review Chemistry, Physical

Scientific importance, properties and growing applications of poly( 3,4-ethylenedioxythiophene)

S Kirchmeyer et al.

JOURNAL OF MATERIALS CHEMISTRY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.