4.7 Article

Thermoplastic Polyurethane/Carbon Nanotube Composites for Stretchable Flexible Pressure Sensors

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Facile Fabrication of Highly Sensitive Thermoplastic Polyurethane Sensors with Surface- and Interface-Impregnated 3D Conductive Networks

Harini Bhuvaneswari Gunasekaran et al.

Summary: This research aims to develop a practical and scalable flexible 3D printed piezoresistive sensor with low filler content. The graphene suspension is sprayed over each layer during the 3D printing of the sensor, forming a conductive network, and the prepared samples are subjected to foaming to create a low-mass-density sensor. The developed sensor exhibits stable and connected conduction path, excellent electrical resistance, and resistance against harsh conditions, and shows promising sensitivity for monitoring human motion and actions.

ACS APPLIED POLYMER MATERIALS (2022)

Article Chemistry, Physical

Highly-stretchable porous thermoplastic polyurethane/carbon nanotubes composites as a multimodal sensor

Guoxuan Zhu et al.

Summary: The study presents a new multimodal sensor based on porous conductive polymer composites, which demonstrates ultralow detection limit and ultrawide sensing range. The sensor has tremendous potentials in detecting strain, pressure, temperature, and even monitoring respiration.

CARBON (2022)

Article Multidisciplinary Sciences

Approaching intrinsic dynamics of MXenes hybrid hydrogel for 3D printed multimodal intelligent devices with ultrahigh superelasticity and temperature sensitivity

Haodong Liu et al.

Summary: Hydrogels are widely studied for flexible sensors in wearable electronics, but their further application is hindered by the ambiguity of sensing mechanisms and the challenges in multi-functionalization. In this study, a cost-effective direct ink writing technique is used to fabricate a 2D MXene bonded hydrogel sensor, which demonstrates excellent strain and temperature sensing performance. The sensing mechanisms are clarified using finite element analysis and in situ temperature-dependent Raman technology.

NATURE COMMUNICATIONS (2022)

Article Engineering, Electrical & Electronic

High-Sensitivity GNPs/PDMS Flexible Strain Sensor with a Microdome Array

Gongdong Wang et al.

Summary: In this research, a flexible strain sensor was developed using polydimethylsiloxane (PDMS) and graphene nano-platelets (GNPs) as the substrates and conductive layers. The sensor exhibited excellent resistance response and stability in different strain ranges, making it suitable for applications in electronic skin, wearable electronic devices, and component health monitoring.

ACS APPLIED ELECTRONIC MATERIALS (2022)

Article Chemistry, Multidisciplinary

Lightweight, Superelastic, and Hydrophobic Polyimide Nanofiber /MXene Composite Aerogel for Wearable Piezoresistive Sensor and Oil/Water Separation Applications

Hu Liu et al.

Summary: The article describes a conductive polyimide nanofiber/MXene composite aerogel with features such as ultralow density, temperature tolerance, superior compressibility, and fatigue resistance, suitable for applications in piezoresistive sensors and oil/water separation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Composites

Highly sensitive and flexible piezoresistive sensor based on c-MWCNTs decorated TPU electrospun fibrous network for human motion detection

Siming Li et al.

Summary: A flexible piezoresistive pressure sensor with excellent conductivity and stable structure was fabricated, showing high sensitivity, wide working pressure range, low hysteresis deviation, and good durability. Demonstrations successfully acquired human physiological signals, demonstrating the potential uses of the sensor in e-skins and wearable devices.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Materials Science, Composites

Lightweight, flexible and highly sensitive segregated microcellular nanocomposite piezoresistive sensors for human motion detection

Zhonglei Ma et al.

Summary: The segregated microcellular nanocomposite piezoresistive sensors exhibit low mass density, good flexibility, high electrical conductivity, and high sensitivity, making them suitable for various applications including wearable electronics, artificial intelligence, human-computer interaction, and soft robotics.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

Constructing conductive titanium carbide nanosheet (MXene) network on polyurethane/polyacrylonitrile fibre framework for flexible strain sensor

Zhixin Jia et al.

Summary: By altering the composition of the flexible substrate, the interaction between MXene and the substrate was effectively enhanced, resulting in a flexible strain sensor with excellent properties.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

Controllable Graphene Wrinkle for a High-Performance Flexible Pressure Sensor

Xinyue Tang et al.

Summary: This study developed a high-sensitivity and low-cost flexible piezoresistive sensor by combining controllable graphene-nanowalls wrinkle and a polydimethylsiloxane elastomer. The sensor exhibited fast response speed and low limit of detection, with a controllable microstructure allowing successful detection of various signals. The sensor's potential applications in prosthetics limbs and intelligent robotics were demonstrated through object manipulation, tactile imaging, and braille recognition.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Synergy of Porous Structure and Microstructure in Piezoresistive Material for High-Performance and Flexible Pressure Sensors

Wei Li et al.

Summary: A porous and microstructure piezoresistive material made of PDMS and MWCNTs was designed for a flexible and highly sensitive pressure sensor, showing high sensitivity response in a wide pressure range from 1 Pa to 100 kPa.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Environment Tolerant Conductive Nanocomposite Organohydrogels as Flexible Strain Sensors and Power Sources for Sustainable Electronics

Hongling Sun et al.

Summary: This study demonstrates an environment-tolerant and ultrastretchable organohydrogel through a simple solvent-replacement strategy, achieving excellent temperature tolerance while maintaining stability and conductivity. Experimental results show that, without sacrificing stretchability and conductivity, the organohydrogel is capable of effectively detecting and discriminating human activities in extreme conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Polymer Science

Ultrahigh sensitivity and wide strain range of porous pressure sensor based on binary conductive fillers by in-situ polymerization

Zhiqiang Hu et al.

Summary: The polyurethane-based pressure sensor, prepared via in-situ synthesis of conductive sponge on the backbone of polyurethane foam, shows excellent performance including ultrahigh sensitivity, wide working range, frequency-independent performance, reliable repeatability, and rapid and stable response. It is a promising candidate for soft electronics and healthcare monitoring.

JOURNAL OF POLYMER RESEARCH (2021)

Article Chemistry, Multidisciplinary

Highly Sensitive Porous PDMS-Based Capacitive Pressure Sensors Fabricated on Fabric Platform for Wearable Applications

Simin Masihi et al.

Summary: In this study, a novel PDMS-based capacitive pressure sensor with optimized dielectric layer porosity was developed for wide-range pressure sensing applications in sports field. By adjusting curing temperature, HNO3/PDMS concentration, and PDMS ratio, the sensitivity of pressure sensors was improved, with higher porosity achieved at higher curing temperatures, HNO3 concentrations, and PDMS ratios. The pressure sensor array was successfully applied in a wearable fit cap for measuring and mapping pressures on a player's head while wearing a helmet, demonstrating its potential in sports applications.

ACS SENSORS (2021)

Article Chemistry, Multidisciplinary

Hierarchically Microstructure-Bioinspired Flexible Piezoresistive Bioelectronics

Tao Yang et al.

Summary: The hierarchically microstructure-bioinspired piezoresistive sensor exhibits ultrahigh sensitivity, wide pressure detection range, fast response time, and can monitor human physiological signals and movement states successfully.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

A Highly Compressible and Stretchable Carbon Spring for Smart Vibration and Magnetism Sensors

Huai-Ling Gao et al.

Summary: Porous carbon materials exhibit both compressibility and stretchability, along with unique structural robustness and durability, making them promising for applications in smart sensor manufacturing.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Stiff and tough PDMS-MMT layered nanocomposites visualized by AIE luminogens

Jingsong Peng et al.

Summary: The study presents the development of PDMS-montmorillonite layered nanocomposites via ice-templating technique, which significantly improves the Young's modulus and toughness compared with pure PDMS. The use of aggregation-induced emission luminogens in confocal fluorescence microscopy allows for three-dimensional reconstruction and crack tracing of the nacre-inspired PDMS-MMT-L nanocomposite, demonstrating mechanisms such as crack deflection and bridging for toughness enhancement. Fine tuning of mechanical properties in elastomers is essential for their application in flexible devices and biomedical fields.

NATURE COMMUNICATIONS (2021)

Article Engineering, Electrical & Electronic

Microstructured capacitive sensor with broad detection range and long-term stability for human activity detection

Xin He et al.

Summary: The pressure sensor developed based on MXene/Ag NWs composite electrodes and micro-structured dielectric layer shows high sensitivity, fast response, wide detection range, and long-term stability. It is capable of detecting various human activities and has promising application prospects in wearable and flexible electronic devices.

NPJ FLEXIBLE ELECTRONICS (2021)

Article Nanoscience & Nanotechnology

Bioinspired, Microstructured Silk Fibroin Adhesives for Flexible Skin Sensors

Xijian Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Environmental

A lightweight and conductive MXene/graphene hybrid foam for superior electromagnetic interference shielding

Zhimin Fan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

A graphite nanoplatelet-based highly sensitive flexible strain sensor

Jinglong Xu et al.

CARBON (2020)

Article Engineering, Electrical & Electronic

Sensitive pressure sensors based on conductive microstructured air-gap gates and two-dimensional semiconductor transistors

Yun-Chiao Huang et al.

NATURE ELECTRONICS (2020)

Article Nanoscience & Nanotechnology

Microstructured Porous Pyramid-Based Ultrahigh Sensitive Pressure Sensor Insensitive to Strain and Temperature

Jun Chang Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Highly Sensitive Flexible Piezoresistive Pressure Sensor Developed Using Biomimetically Textured Porous Materials

Tingting Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Multidisciplinary

High Sensitivity and Broad Range Flexible Pressure Sensor Using Multilayered Porous PDMS/AgNP Sponge

Shuai Zhao et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Engineering, Manufacturing

Flexible and lightweight microcellular RGO@Pebax composites with synergistic 3D conductive channels and microcracks for piezoresistive sensors

Diandian Dong et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Nanoscience & Nanotechnology

Ultrahigh-Sensitivity Piezoresistive Pressure Sensors for Detection of Tiny Pressure

Hongwei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Composites

Flexible, conductive, and highly pressure-sensitive graphene-polyimide foam for pressure sensor application

Jiayi Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Nanoscience & Nanotechnology

Flexible, Highly Sensitive, and Wearable Pressure and Strain Sensors with Graphene Porous Network Structure

Yu Pang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

Compressible Graphene-Coated Polymer Foams with Ultralow Density for Adjustable Electromagnetic Interference (EMI) Shielding

Bin Shen et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Flexible Transparent Electronic Gas Sensors

Ting Wang et al.

SMALL (2016)

Article Materials Science, Multidisciplinary

Organic vapor sensing behaviors of conductive thermoplastic polyurethane-graphene nanocomposites

Hu Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Article Chemistry, Multidisciplinary

Elastomeric Electronic Skin for Prosthetic Tactile Sensation

Aaron P. Gerratt et al.

ADVANCED FUNCTIONAL MATERIALS (2015)