☆ 4.4 Review

Rare Earth Tungstate: One Competitive Proton Conducting Material Used for Hydrogen Separation: A Review

SEPARATIONS (2023)

Related references

Note: Only part of the references are listed.
Review Energy & Fuels

Mixed matrix membranes for H2/CO2 gas separation- a critical review

Fayez Nasir Al-Rowaili et al.

Summary: Membrane technology plays a significant role in the separation processes of modern industries, especially in gas separation. Mixed matrix membranes (MMMs) have been widely studied and applied to improve the gas separation performance. This paper reviews the choice of advanced materials, recent research developments, and applications of MMMs in gas separation, with a focus on H2/CO2.

FUEL (2023)

Add to Collection
Article Energy & Fuels

Facile integration of core-shell catalyst and Pd-Ag membrane for hydrogen production from low-temperature dry reforming of methane

Subhasis Pati et al.

Summary: In this study, a catalytic membrane reactor combining an ultra-thin Pd-Ag alloy membrane with a coke-resistant Ni-SiO2@CeO2 core-shell catalyst was developed for high yield hydrogen production from dry reforming of methane (DRM). The performance of the membrane in the presence of CO, CO2, and CH4 was evaluated, showing little reduction in H-2 flux. The use of the membrane reactor resulted in improved methane conversion and suppression of the reverse water gas shift reaction.

FUEL (2023)

Add to Collection
Review Green & Sustainable Science & Technology

Recent advance on fundamental properties and synthesis of barium zirconate for proton conducting ceramic fuel cell

Arpan Kumar Nayak et al.

Summary: Recently, Perovskite oxides have been widely used in electrochemical conversion devices like Proton conducting Ceramic Fuel Cells (PCFC). Among them, barium zirconate (BaZrO3) is considered as a promising PCFC electrolyte material due to its excellent chemical stability and rapid proton diffusion. By altering the synthesis parameters and conditions, various novel synthesis techniques have been employed to prepare barium zirconate (BaZrO3) with enhanced material properties. Doping with trivalent impurities improves proton mobility and increases proton conductivity at reduced temperature, thereby expanding the scope of PCFC application with optimized output performance.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection
Article Materials Science, Ceramics

Low-temperature sintering and enhanced stability of fluorine-modified BaZr0.8Y0.2O3-? synthesised by a sol-gel alkoxide route

Angel Trivino-Pelaez et al.

Summary: Sol-gel synthesis using alkoxides is employed to obtain fluorine-modified BaZr0.8Y0.2O3-delta nanopowders, which show inhibited carbonate formation and good chemical stability at high temperatures due to fluorine doping.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2023)

Add to Collection
Article Chemistry, Physical

Preparation of thin (∼2 μm) Pd membranes on ceramic supports with excellent selectivity and attrition resistance

Yuxin Yang et al.

Summary: Thin Pd membranes with a thickness of about 2 μm were prepared by a two-step electroless plating method on porous ceramic supports. The membranes exhibited stable and high hydrogen permeation flux and selectivity under different operating conditions. The effect of gas mixtures on the hydrogen permeation flux was studied, and the membranes also showed good resistance to attrition.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Add to Collection
Article Chemistry, Physical

Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes

Xiao Liang et al.

Summary: Our newly developed V90Cr5Al5 hydrogen permeable alloy has been alloyed with Cu to enhance malleability. The resulting (V90Cr5Al5)90Cu10 consists of bcc-(V) and fcc-(Cu) phases and can be cold rolled into a thin membrane. After rolling and annealing, (V90Cr5Al5)90Cu10 exhibits finer grains and a higher percentage of special grain boundaries compared to the as-cast case. The rolled/annealed (V90Cr5Al5)90Cu10 shows a lower hydrogen diffusivity but significantly improved hydrogen permeation flux.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection
Review Engineering, Environmental

Synthesis and application of Ni-based membranes in hydrogen separation and purification systems: A review

Samukeliso Dube et al.

Summary: Membrane technology is highly valued in hydrogen purification systems, with particular focus on developing stable and selective Ni-based membranes. These membranes have attracted attention due to their high-temperature tolerance and low cost. Extensive studies have investigated the solubility, diffusivity, and permeability of nickel to hydrogen. This review provides a comprehensive overview of the synthesis, applications, and catalytic effects of Ni-based membranes in hydrogen purification systems. Further research is needed to explore the potential opportunities offered by catalytic nickel-based membranes, especially in multi-component systems.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Add to Collection
Review Energy & Fuels

Issues and challenges in hydrogen separation technologies

Muhammad Amin et al.

Summary: Depleting energy resources, global warming, and environmental problems call for the substitution of conventional fuels with more efficient and sustainable resources. Hydrogen (H2) has emerged as the ultimate choice due to its low carbon emissions, cleanliness, and efficiency. However, the production, separation, and storage of H2 pose challenges that need to be addressed. This paper provides a comprehensive review of the issues and challenges in the separation of H2 using various technologies, with a focus on membrane technology as the most promising method.

ENERGY REPORTS (2023)

Add to Collection
Article Engineering, Chemical

Insights into the progress of polymeric nano-composite membranes for hydrogen separation and purification in the direction of sustainable energy resources

Nishel Saini et al.

Summary: This paper analyzes key rules regarding material engineering and separation mechanisms for improved hydrogen separation membranes, focusing on using different polymer membrane materials to design matrices with better characteristics. Research suggests that polymer nanocomposite membranes have the potential to compete with conventional methods.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Applied

Hydrogen production from methane and carbon dioxide mixture using all-solid-state electrochemical cell based on a proton-conducting membrane and redox-robust composite electrodes

Denis Osinkin et al.

Summary: This paper presents the test results of an electrochemical cell for electricity generation, hydrogen separation, and high-purity hydrogen production. The cell shows promising performance in terms of hydrogen flow rates and has potential applications in hydrogen production.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection
Article Materials Science, Ceramics

Phase stability and hydrogen permeation performance of BaCo0.4Fe0.4Zr0.1Y0.1O3-d ceramic membranes

Dandan Zhang et al.

Summary: In this study, a novel ceramic membrane with mixed protonic-electronic conduction was developed, exhibiting high H-2 permeation flux and excellent stability at high temperatures. Coating a composite catalytic layer on the membrane surface further improved its chemical stability and hydrogen permeability.

CERAMICS INTERNATIONAL (2022)

Add to Collection
Article Chemistry, Physical

Selective and efficient hydrogen separation of Pd-Au-Ag ternary alloy membrane

Qi Zhou et al.

Summary: This study used density functional theory simulations to investigate the hydrogen separation performance of Pd-Au-Ag membrane and compared it with Pd-Au alloy. The results showed that the Pd-Au-Ag alloy exhibited superior selectivity and permeability, making it a promising membrane for hydrogen separation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection
Article Chemistry, Physical

Ultra-pure hydrogen production via ammonia decomposition in a catalytic membrane reactor

Valentina Cechetto et al.

Summary: This work presents two alternatives for increasing the purity of hydrogen produced in a membrane reactor. The experimental results demonstrate that ultra-pure hydrogen can be produced by either increasing the thickness of the membrane selective layer or using a small purification unit in the permeate of the membranes. Additionally, the use of an adsorption bed downstream the membrane reactor is a cheaper solution that can achieve ultra-pure hydrogen with higher reactor pressures, lower temperatures, and thinner membranes.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection
Article Chemistry, Physical

Comparative study on the numerical simulation of hydrogen separation through palladium and palladium-copper membranes

Mostafa El-Shafie et al.

Summary: This study numerically investigates the hydrogen diffusion through palladium and palladium-copper membranes and predicts their performance in hydrogen separation using a two-dimensional computational fluid dynamics model. The simulations show that the feed-gap distance, hydrogen concentration, and reactor heating temperature have significant impacts on the hydrogen permeation processes. The diffusion flux of the Pd-Cu40% membrane is relatively larger than that of the pure Pd membrane, and the convective flux, diffusion mass transfer flux, and concentration distribution of the Pd-Cu40% membrane increase up to 350 degrees C and then decrease at higher temperatures.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection
Article Engineering, Chemical

Highly efficient recovery of hydrogen from dilute H2-streams using BaCe0.7Zr0.1Y0.2O3-d/Ni-BaCe0.7Zr0.1Y0.2O3-d dual-layer hollow fiber membrane

Furong Li et al.

Summary: BaCe0.7Zr0.1Y0.2O3-delta/Ni-BaCe0.7Zr0.1Y0.2O3-delta dual-layer hollow fiber membranes prepared by a co-spinning/co-sintering method can moderately control hydrogen permeation and achieve high hydrogen recovery rate in low concentration hydrogen streams.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Engineering, Chemical

Chemical and mechanical stability of BCZY-GDC membranes for hydrogen separation

Elisa Mercadelli et al.

Summary: This study investigated the hydrogen permeation of BCZY-GDC asymmetric membranes for 100 hours using wet 15% CO2 in Ar as the sweep gas. The results showed that the asymmetric membranes exhibited promising and stable hydrogen permeation flux values under the test conditions, and no structural or morphological changes were detected after the testing.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Chemistry, Physical

Increase in the density of Sr2Fe1.5Mo0.5O6-δ membranes through an excess of iron oxide: The effect of iron oxide on transport and kinetic parameters

Natalia M. Porotnikova et al.

Summary: This paper investigates a highly oxygen-conducting material and examines its structural characteristics, electrical conductivity, and oxygen exchange rate. The influence of a thin layer of strontium molybdate on the surface and between the grains of polycrystalline strontium ferrite-molybdates on oxygen surface exchange and diffusivity is also considered.

SURFACES AND INTERFACES (2022)

Add to Collection
Article Engineering, Chemical

Enhanced CO2-tolerance and hydrogen separation performance of Ba-based ceramic membrane modified by Ce0.9Gd0.1O2-8 surface layer

Lujian Jia et al.

Summary: Interest in mixed conducting ceramic membrane for efficient hydrogen separation is growing. The addition of gadolinium-doped ceria (CGO) to alkaline earth metal membranes improves their surface activity and enhances the H2 separation flux. The modified membrane also shows improved CO2-tolerance and maintains stable H2 separation performance under CO2-containing atmosphere, providing new possibilities for alkaline-earth-metal-containing ceramic membrane in H2 purification.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Engineering, Chemical

Externally self-supported metallic nickel hollow fiber membranes for hydrogen separation

Mingming Wang et al.

Summary: Highly-asymmetric metallic Ni hollow fiber membranes were fabricated using a modified phase inversion and sintering technique. By adjusting spinning conditions and sintering parameters, a hollow fiber with optimized microstructure and significantly increased hydrogen flux was achieved, demonstrating great potential for application in gas separation processes.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection
Article Engineering, Chemical

ZIF-67 membranes supported on porous ZnO hollow fibers for hydrogen separation from gas mixtures

Hanhan Chen et al.

Summary: In this study, Co-based zeolitic imidazolate framework-67 (ZIF) membranes were successfully developed on porous ZnO hollow fibers using an in situ solvothermal growth method. The resulting membranes exhibited desirable permeation performance, ideal selectivities for single gas, and separation factors for gas mixtures. The membranes also displayed good stability in terms of gas permeances and showed excellent thermal stability. The development of these membranes provides important insights for the advancement of efficient gas separation technologies.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection
Article Engineering, Chemical

Porous stainless steel hollow fiber-supported ZIF-8 membranes via FCDS for hydrogen/carbon dioxide separation

Yali Zhao et al.

Summary: MOF membranes have great potential in gas separation, but their industrialization is hindered by complex and time-consuming synthesis methods. This study successfully synthesized a series of ZIF-8 membranes using the fast current drive synthesis (FCDS) method on polydopamine-modified porous stainless steel hollow fiber substrates. The ZIF-8 hollow fiber membranes exhibited good selectivity and permeance, making significant progress in accelerating the industrialization of MOF membranes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection
Article Engineering, Chemical

Atomic layer deposited aluminium oxide membranes for selective hydrogen separation through molecular sieving

Xiaomei Liu et al.

Summary: A high-performance hydrogen separation membrane was developed using atomic layer deposition method to deposit ultra-thin Al2O3 layer on a porous anodic aluminum oxide support. The membrane exhibited high hydrogen permeance and selectivity, making it suitable for industrial hydrogen purification and recovery.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection
Article Engineering, Chemical

Fundamental modeling and experimental validation of hydrogen and oxygen transport through mixed ionic and electronic conducting membranes

Jayashree Kalyanaraman et al.

Summary: Hydrogen transporting mixed ionic and electronic membranes have great potential for process intensification and energy savings in various applications, but commercial adoption is still limited; understanding the water splitting phenomenon and solid state membrane transport can bridge the gap between membrane materials science and practical process applications; this study presents a fundamental transport model and validates it rigorously against experimental data.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Enhanced hydrogen separation performance of Linde Type-A zeolite molecular sieving membrane by cesium ion exchange

Can Xu et al.

Summary: The hydrogen separation performance of molecular sieving membranes was significantly enhanced through ion exchange, showing great potential for application in hydrogen purification.

MATERIALS LETTERS (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Analysis of hydrogen embrittlement in palladium-copper alloys membrane from first principal method using density functional theory

Oriyomi Opetubo et al.

Summary: This study investigates the effects of hydrogen on pure palladium and palladium-copper alloys and finds that the presence of hydrogen alters the crystalline structure. Pd-Cu alloy shows better stability and anti-hydrogen brittleness compared to pure palladium.

VACUUM (2022)

Add to Collection
Article Materials Science, Ceramics

Development of Mn and Mo double-substituted La5.5WO11.25-δ based membranes with enhanced hydrogen permeation flux

Yao Huang et al.

Summary: Mixed protonic-electronic ceramic lanthanum tungstate membranes were developed by doping Mn and Mo ions, resulting in improved H2 permeation flux. Additionally, the introduction of a moderate amount of Mo ions helped to achieve a single phase structure in the membranes.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection
Article Engineering, Chemical

Influence of Cr doping on hydrogen permeation performance of lanthanum tungstate membrane

Yao Huang et al.

Summary: The effect of Cr doping on the phase structure, microstructure, hydrogen permeation, and chemical stability of lanthanum tungstate was investigated. It was found that with the increase in Cr content, the hydrogen permeation flux also increased. The membrane with x = 0.2 showed the highest hydrogen permeation flux due to its higher oxygen vacancy concentration, and exhibited good stability during a 104-hour hydrogen permeation test.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection
Review Materials Science, Ceramics

Recent progress in barium zirconate proton conductors for electrochemical hydrogen device applications: A review

M. Khalid Hossain et al.

Summary: Doped BaZrO3 is a solid ion-conducting material with excellent proton conduction properties for electrolyte applications in electrochemical hydrogen devices operating in the intermediate temperature range of 400-650 degrees C. Enhanced proton transport properties and material fabrication processes of BZO can be achieved through the use of dopants, sintering aid, and various synthesis methods. The review highlights the applications of BZO in various electrochemical hydrogen devices and provides insights into the impact of different factors on the performance of BZO electrolyte materials.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Review Chemistry, Physical

Advances in materials process and separation mechanism of the membrane towards hydrogen separation

Neha Pal et al.

Summary: The article reviews membrane separation approaches for hydrogen separation, highlighting the advantages of polymeric and mixed matrix membranes. The hydrogen separation mechanism in membranes depends on morphology and can involve various gas transport mechanisms. The use of polymer and inorganic fillers in mixed matrix membranes makes the gas separation mechanism complex but can lead to improved hydrogen separation efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Enhanced H2 production by using La5.5WO11.25-δ-La0.8Sr0.2FeO3-δ mixed oxygen ion-proton-electron triple-conducting membrane

Wenyuan Liang et al.

Summary: By developing a mixed oxygen ion-proton-electron triple-conducting membrane LWO-LSF, a high H-2 flux in H-2 production was achieved by enhancing H-2 production efficiency through the permeation and counter-permeation of proton and oxygen ion.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Applicability of membrane reactor technology in industrial hydrogen producing reactions: Current effort and future directions

Sajad Mamivand et al.

Summary: The use of membrane reactor technology for selective hydrogen separation and conversion has demonstrated significant potential in improving energy efficiency and reducing emissions in industrial processes. By enhancing reactor performance through selective hydrogen separation, the technology shows promising applications in various fields in the future.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Add to Collection
Article Engineering, Environmental

Palladium-copper membrane prepared by electroless plating for hydrogen separation at low temperature

Ye Hwan Lee et al.

Summary: In this study, an electroless plated Pd-Cu membrane was developed to effectively purify hydrogen generated at low temperatures. The Pd-Cu membrane showed enhanced hydrogen permeability and stability compared to previous results, with the added benefit of changing the desorption properties of hydrogen when using this alloy.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Chemistry, Physical

Novel nanocomposite materials for oxygen and hydrogen separation membranes

Vladislav A. Sadykov et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection
Article Chemistry, Physical

Single-step synthesized dual-layer hollow fiber membrane reactor for on-site hydrogen production through ammonia decomposition

Hongda Cheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection
Article Physics, Applied

Ab initio calculations of structural, electronic and vibrational properties of BaTiO3 and SrTiO3 perovskite crystals with oxygen vacancies

L. L. Rusevich et al.

LOW TEMPERATURE PHYSICS (2020)

Add to Collection
Article Engineering, Chemical

Tailoring hydrogen separation performance through the ceramic lanthanum tungstate membranes by chlorine doping

Li Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection
Article Engineering, Chemical

Metalloid phosphorus cation doping: An effective strategy to improve permeability and stability through the hydrogen permeable membranes

Libin Zhuang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection
Article Engineering, Chemical

Hydrogen permeation performance of dual-phase protonic-electronic conducting ceramic membrane with regular and independent transport channels

Bo Meng et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection
Article Engineering, Chemical

Hydrogen permeability through Nd5.5W0.35Mo0.5Nb0.15O11.25-δ mixed protonic-electronic conducting membrane

Yan Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Add to Collection
Article Engineering, Chemical

Lanthanum tungstate membranes for H2 extraction and CO2 utilization: Fabrication strategies based on sequential tape casting and plasma-spray physical vapor deposition

M. E. Ivanova et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Processing-induced secondary phase formation in Mo-substituted lanthanum tungstate membranes

Ke Ran et al.

ACTA MATERIALIA (2019)

Add to Collection
Review Mechanics

Synthesis of tungstates/Ni0.5Cu0.5O nanocomposite materials for hydrogen separation cermet membranes

Y. Bespalko et al.

COMPOSITE STRUCTURES (2018)

Add to Collection
Article Engineering, Chemical

Effect of Pt layer on the hydrogen permeation property of La5.5W0.45Nb0.15Mo0.4O11.25-δ membrane

Yan Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection
Article Materials Science, Ceramics

Effect of microstructure on electrical and mechanical properties of La5.4WO12-delta proton conductor

Wendelin Deibert et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection
Article Engineering, Chemical

Asymmetric membrane structure: An efficient approach to enhance hydrogen separation performance

Li Chen et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection
Article Chemistry, Physical

Novel proton-conducting nanocomposites for hydrogen separation membranes

V. A. Sadykov et al.

SOLID STATE IONICS (2018)

Add to Collection
Article Chemistry, Physical

CO2-tolerant U-shaped hollow fiber membranes for hydrogen separation

Hui Liu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection
Article Chemistry, Physical

On the ionic character of H2 separation through mixed conducting Nd5.5W0.5Mo0.5O11.25-δ membran

S. Escolastico et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection
Article Chemistry, Physical

Phase-inversion synthesize of asymmetric-structured La5.5W0.6Mo0.4O11.25-δ membranes with enhanced hydrogen permeation flux

Huiqi Xie et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection
Article Engineering, Chemical

Effect of Pt catalyst and external circuit on the hydrogen permeation of Mo and Nb co-doped lanthanum tungstate

Yong Cao et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection
Article Engineering, Chemical

Effect of the La/W ratio in lanthanum tungstate on the structure, stability and hydrogen permeation properties

Yan Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection
Article Materials Science, Ceramics

Stability and sintering of MgO as a substrate material for Lanthanum Tungstate membranes

Wendelin Deibert et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection
Article Materials Science, Ceramics

CO2-tolerant Ni-La5.5WO11.25-δ dual-phase membranes with enhanced H2 permeability

Huiqi Xie et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Effect of tri- and tetravalent metal doping on the electrochemical properties of lanthanum tungstate proton conductors

J. M. Porras-Vazquez et al.

DALTON TRANSACTIONS (2016)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Comparison of the local and the average crystal structure of proton conducting lanthanum tungstate and the influence of molybdenum substitution

Anna Magraso et al.

DALTON TRANSACTIONS (2016)

Add to Collection
Article Engineering, Chemical

Niobium and molybdenum co-doped La5.5WO11.25 - δ membrane with improved hydrogen permeability

Yan Chen et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection
Article Engineering, Chemical

Catalytic activation of ceramic H2 membranes for CMR processes

S. Escolastico et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection
Article Engineering, Chemical

Chemical stability and H2 flux degradation of cercer membranes based on lanthanum tungstate and lanthanum chromite

Jonathan M. Polfus et al.

JOURNAL OF MEMBRANE SCIENCE (2016)

Add to Collection
Article Chemistry, Physical

Gas to Liquids: Natural Gas Conversion to Aromatic Fuels and Chemicals in a Hydrogen-Permeable Ceramic Hollow Fiber Membrane Reactor

Jian Xue et al.

ACS CATALYSIS (2016)

Add to Collection
Article Engineering, Chemical

Hydrogen permeation, water splitting and hydration kinetics in Nd5.4Mo0.3W0.7O12-δ

Zuoan Li et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection
Article Engineering, Chemical

Hydrogen separation membranes based on dense ceramic composites in the La27W5O55.5-LaCrO3 system

Jonathan M. Polfus et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection
Article Engineering, Chemical

Nd5.5W1-xUxO11.25-δ system: Electrochemical characterization and hydrogen permeation study

Sonia Escolastico et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection
Article Engineering, Chemical

Preparation and sintering behaviour of La5.4WO12-δ asymmetric membranes with optimised microstructure for hydrogen separation

Wendelin Deibert et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Add to Collection
Review Materials Science, Multidisciplinary

A review of advanced proton-conducting materials for hydrogen separation

Zetian Tao et al.

PROGRESS IN MATERIALS SCIENCE (2015)

Add to Collection
Article Chemistry, Physical

Diffusion of Nd and Mo in lanthanum tungsten oxide

Einar Vollestad et al.

SOLID STATE IONICS (2015)

Add to Collection
Article Chemistry, Physical

Improved protonic conductivity and Vickers hardness for lanthanum tungstate with potassium doping (La,K)28-yW4+yO54+δ

Heng Liu et al.

SOLID STATE IONICS (2015)

Add to Collection
Article Chemistry, Physical

Tailoring mixed ionic-electronic conduction in H2 permeable membranes based on the system Nd5.5W1-xMoxO11.25-δ

Sonia Escolastico et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection
Article Chemistry, Physical

Solid State Transport and Hydrogen Permeation in the System Nd5.5W1-xRexO11.25-δ

Sonia Escolastico et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection
Article Chemistry, Multidisciplinary

Outstanding hydrogen permeation through CO2-stable dual-phase ceramic membranes

S. Escolastico et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection
Article Engineering, Chemical

Hydrogen permeation characteristics of La27Mo1.5W3.5O55.5

Einar Vollestad et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection
Article Materials Science, Ceramics

Asymmetric supported dense lanthanum tungstate membranes

V. Gil et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection
Article Chemistry, Physical

Transport properties and oxidation and hydration kinetics of the proton conductor Mo doped Nd5.5WO11.25-delta

Mischa Ruf et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Article Chemistry, Physical

Optimization of the mixed protonic-electronic conducting materials based on (Nd5/6Ln1/6)5.5WO11.25-δ

Sonia Escolastico et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Review Chemistry, Physical

Effects of the La/W ratio and doping on the structure, defect structure, stability and functional properties of proton-conducting lanthanum tungstate La28-xW4+xO54+δ. A review

Anna Magraso et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Article Chemistry, Physical

Local Structure of Proton-Conducting Lanthanum Tungstate La28-xW4+xO54+δ: a Combined Density Functional Theory and Pair Distribution Function Study

Liv-Elisif Kalland et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection
Article Chemistry, Physical

Structural and Conducting Features of Niobium-Doped Lanthanum Tungstate, La27(W1-xNbx)5O55.55-δ

M. J. Zayas-Rey et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Enhanced H2 Separation through Mixed Proton-Electron Conducting Membranes Based on La5.5W0.8M0.2O11.25-

Sonia Escolastico et al.

CHEMSUSCHEM (2013)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Synthesis and Characterization of Nonsubstituted and Substituted Proton-Conducting La6-xWO12-y

Janka Seeger et al.

INORGANIC CHEMISTRY (2013)

Add to Collection
Article Chemistry, Physical

Hydrogen permeation in asymmetric La28-xW4+xO54+3x/2 membranes

Vanesa Gil et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection
Article Engineering, Chemical

Hydrogen separation in La5.5WO11.25-δ membranes

Sonia Escolastico et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Add to Collection
Article Chemistry, Physical

Transport number measurements and fuel cell testing of undoped and Mo-substituted lanthanum tungstate

Anna Magraso

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

Hydration of lanthanum tungstate (La/W=5.6 and 5.3) studied by TG and simultaneous TG-DSC

Ragnhild Hancke et al.

SOLID STATE IONICS (2013)

Add to Collection
Article Chemistry, Physical

In situ high temperature powder neutron diffraction study of undoped and Ca-doped La28-xW4+xO54+3x/2 (x=0.85)

Anna Magraso et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection
Article Chemistry, Physical

Mo-Substituted Lanthanum Tungstate La28-yW4+yO54+δ: A Competitive Mixed Electron-Proton Conductor for Gas Separation Membrane Applications

M. Amsif et al.

CHEMISTRY OF MATERIALS (2012)

Add to Collection
Article Chemistry, Physical

Preparation of lanthanum tungstate membranes by tape casting technique

Manuel Weirich et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection
Article Chemistry, Physical

Defect structure and its nomenclature for mixed conducting lanthanum tungstates La28-xW4+xO54+3x/2

Skjalg Erdal et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection
Article Chemistry, Physical

Complete structural model for lanthanum tungstate: a chemically stable high temperature proton conductor by means of intrinsic defects

Anna Magraso et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection
Article Chemistry, Physical

Study of hydrogen permeation in (La5/6Nd1/6)5.5WO12-δ membranes

Sonia Escolastico et al.

SOLID STATE IONICS (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Fabrication, structural and electrical characterization of lanthanum tungstate films by pulsed laser deposition

Einar Vollestad et al.

THIN SOLID FILMS (2012)

Add to Collection
Article Chemistry, Physical

La5.5WO12-δ Characterization of Transport Properties under Oxidizing Conditions: A Conductivity Relaxation Study

Cecilia Solis et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Structural and conductivity studies of Y10-xLaxW2O21

Anna Lashtabeg et al.

JOURNAL OF SOLID STATE CHEMISTRY (2010)

Add to Collection
Article Chemistry, Physical

Preparation and Characterization of Nanocrystalline Mixed Proton-Electronic Conducting Materials Based on the System Ln6WO12

Sonia Escolastico et al.

CHEMISTRY OF MATERIALS (2009)

Add to Collection
Article Chemistry, Physical

Sintering, chemical stability and electrical conductivity of the perovskite proton conductors BaCe0.45Zr0.45M0.1O3-δ (M = In, Y, Gd, Sm)

Jingde Lv et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection
Article Chemistry, Multidisciplinary

Effects of protons and acceptor substitution on the electrical conductivity of La6WO12

Reidar Haugsrud et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2008)

Add to Collection
Article Chemistry, Physical

Defects and transport properties in Ln6WO12 (Ln = La, Nd, Gd, Er)

Reidar Haugsrud

SOLID STATE IONICS (2007)

Add to Collection
Article Chemistry, Physical

Rare-earth and tungsten oxynitrides with a defect fluorite-type structure as new pigments

N Diot et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2001)

Add to Collection
Article Chemistry, Physical

Proton conduction in non-perovskite-type oxides at elevated temperatures

T Shimura et al.

SOLID STATE IONICS (2001)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.