Related references
Note: Only part of the references are listed.Finite Element Analysis of Graphene Oxide Hinge Structure-based RF NEM Switch
Rekha Chaudhary et al.
IETE JOURNAL OF RESEARCH (2023)
Green lean six sigma sustainability - oriented project selection and implementation framework for manufacturing industry
Mahender Singh Kaswan et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2023)
Success factors for the adoption of green lean six sigma in healthcare facility: an ISM-MICMAC study
Rajeev Rathi et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2023)
Green Lean Six Sigma for improving manufacturing sustainability: Framework development and validation
Rajeev Rathi et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Analyzing barriers of Green Lean practices in manufacturing industries by DEMATEL approach
Charanjit Singh et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2021)
Analysis and prioritization of Lean Six Sigma enablers with environmental facets using best worst method: A case of Indian MSMEs
Mahipal Singh et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Investigation of life cycle assessment barriers for sustainable development in manufacturing using grey relational analysis and best worst method
Mahender Singh Kaswan et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2021)
Selection and performance estimation of Green Lean Six Sigma Projects: a hybrid approach of technology readiness level, data envelopment analysis, and ANFIS
Mohammad Javad Ershadi et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
Exploration and Investigation of Green Lean Six Sigma Adoption Barriers for Manufacturing Sustainability
Mahender Singh Kaswan et al.
IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT (2021)
Integral measures and framework for green lean six sigma implementation in manufacturing environment
Vishwas Yadav et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2021)
Analyzing the critical success factors influencing Lean Six Sigma implementation: fuzzy DEMATEL approach
Shruti J. Raval et al.
JOURNAL OF MODELLING IN MANAGEMENT (2021)
Analysing the adoption barriers for sustainability in the Indian power sector by DEMATEL approach
Vidyadhar V. Gedam et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2021)
The application of Green Lean Six Sigma
Hamed Gholami et al.
BUSINESS STRATEGY AND THE ENVIRONMENT (2021)
Big data in lean six sigma: a review and further research directions
Shivam Gupta et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)
Investigating the enablers associated with implementation of Green Lean Six Sigma in manufacturing sector using Best Worst Method
Mahender Singh Kaswan et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2020)
An integrated approach to modeling the barriers in implementing green manufacturing practices in SMEs
Koppiahraj Karuppiah et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Adopting Six Sigma DMAIC for environmental considerations in process industry environment
Anupama Prashar
TQM JOURNAL (2020)
Lean and Green: practices, paradigms and future prospects
Antonio Marco-Ferreira et al.
BENCHMARKING-AN INTERNATIONAL JOURNAL (2020)
Green Lean Six Sigma implementation framework: a case of reducing graphite and dust pollution
Michael Sony et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2020)
Green Lean Six Sigma for sustainable development: Integration and framework
Mahender Singh Kaswan et al.
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2020)
Smart Work Injury Management (SWIM) System: Artificial Intelligence in Work Disability Management
Andy S. K. Cheng et al.
JOURNAL OF OCCUPATIONAL REHABILITATION (2020)
Green implementation of Lean Six Sigma projects in the manufacturing sector
Alireza Shokri et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2020)
Application of system dynamics modelling for a sustainable manufacturing system of an Indian automotive component manufacturing organisation: a case study
R. M. Thirupathi et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2019)
Analysis and modeling the enablers of Green Lean Six Sigma implementation using Interpretive Structural Modeling
Mahender Singh Kaswan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Lean Six Sigma applied to process performance and improvement model for the development of electric scooter water-cooling green motor assembly
Ching-Hsin Wang et al.
PRODUCTION PLANNING & CONTROL (2019)
Sustainable routes for quantitative green selenocyanation of activated alkynes
Ling-Hui Lu et al.
CHINESE CHEMICAL LETTERS (2019)
A grey-based green supplier selection model for uncertain environments
Seyed Amin Seyed Haeri et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Green, lean, Six Sigma barriers at a glance: A case from the construction sector of Pakistan
Kramat Hussain et al.
BUILDING AND ENVIRONMENT (2019)
Green or lean? A supply chain approach to sustainable performance
Baofeng Huo et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Integrated green lean approach and sustainability for SMEs: From literature review to a conceptual framework
Rebecca Siegel et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Lean Six Sigma in policing services: case examples, lessons learnt and directions for future research
Jiju Antony et al.
TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE (2019)
A structured review of Lean Six Sigma in various industrial sectors
Mahipal Singh et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2019)
Just in time elements extraction and prioritization for health care unit using decision making approach
Mahender Singh Kaswan et al.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2019)
Quality function deployment: more than a design tool
Nadiye Ozlem Erdil et al.
INTERNATIONAL JOURNAL OF QUALITY AND SERVICE SCIENCES (2019)
Supporting Analysis of Technical Debt Causes and Effects with Cross-Company Probabilistic Cause-Effect Diagrams
Nicolli Rios et al.
2019 IEEE/ACM INTERNATIONAL CONFERENCE ON TECHNICAL DEBT (TECHDEBT 2019) (2019)
Lean Six Sigma with environmental focus: review and framework
R. Ben Ruben et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
A new holistic conceptual framework for green supply chain management performance assessment based on circular economy
Yigit Kazancoglu et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Ranking of drivers for integrated lean-green manufacturing for Indian manufacturing SMEs
Nevil S. Gandhi et al.
JOURNAL OF CLEANER PRODUCTION (2018)
The expected contribution of Industry 4.0 technologies for industrial performance
Lucas Santos Dalenogare et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2018)
Development of a Green Lean Six Sigma model for public sectors
Raja Sreedharan et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2018)
A framework for the integration of Green and Lean Six Sigma for superior sustainability performance
Anass Cherrafi et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
Prioritizing the barriers to achieve sustainable consumption and production trends in supply chains using fuzzy Analytical Hierarchy Process
Sachin Kumar Mangla et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Green supply chain management related performance indicators in agro industry: A review
Vijay Kumar Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Implementation of Lean Six Sigma framework with environmental considerations in an Indian automotive component manufacturing firm: a case study
R. Ben Ruben et al.
PRODUCTION PLANNING & CONTROL (2017)
Barriers in Green Lean implementation: a combined systematic literature review and interpretive structural modelling approach
Anass Cherrafi et al.
PRODUCTION PLANNING & CONTROL (2017)
Road map for the implementation of green manufacturing practices in Indian manufacturing industries An ISM approach
Abhijeet K. Digalwar et al.
BENCHMARKING-AN INTERNATIONAL JOURNAL (2017)
Lean Six Sigma and environmental sustainability: the case of a Norwegian dairy producer
Daryl Powell et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2017)
Quantitative analysis of Six Sigma, Lean and Lean Six Sigma research publications in last two decades
Alireza Shokri
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2017)
Investigating the green impact of Lean, Six Sigma and Lean Six Sigma
Nashmi Chugani et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2017)
Ecological-economic efficiency evaluation of green technology innovation in strategic emerging industries based on entropy weighted TOPSIS method
Li-yan Sun et al.
ECOLOGICAL INDICATORS (2017)
Lean Six Sigma: yesterday, today and tomorrow
Jiju Antony et al.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2017)
Combining livestock and tree crops to improve sustainability in agriculture: a case study using the Life Cycle Assessment (LCA) approach
Luisa Paolotti et al.
JOURNAL OF CLEANER PRODUCTION (2016)
The integration of lean manufacturing, Six Sigma and sustainability: A literature review and future research directions for developing a specific model
Anass Cherrafi et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Barriers in green lean six sigma product development process: an ISM approach
Sanjay Kumar et al.
PRODUCTION PLANNING & CONTROL (2016)
A Lean Six Sigma framework for the reduction of ship loading commercial time in the iron ore pelletising industry
Jose Arturo Garza-Reyes et al.
PRODUCTION PLANNING & CONTROL (2016)
An empirical study on applicability of lean and green practices in the foundry industry
Suresh Prasad et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2016)
Lean Six Sigma and Innovation - an exploratory study among UK organisations
Jiju Antony et al.
TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
A Framework for Collaborative Robot (CoBot) Integration in Advanced Manufacturing Systems
Ana M. Djuric et al.
SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING (2016)
Lean and green - a systematic review of the state of the art literature
Jose Arturo Garza-Reyes
JOURNAL OF CLEANER PRODUCTION (2015)
World-class manufacturing by Fiat. Comparison with Toyota Production System from a Strategic Management, Management Accounting, Operations Management and Performance Measurement dimension
Andrea Chiarini et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2015)
A systematic review of Lean Six Sigma for the manufacturing industry
Saja Ahmed Albliwi et al.
BUSINESS PROCESS MANAGEMENT JOURNAL (2015)
Modelling customer and technical requirements for sustainable supply chain planning
Zhonghua Zhang et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2014)
Synergizing an ecosphere of lean for sustainable operations
Wai Peng Wong et al.
JOURNAL OF CLEANER PRODUCTION (2014)
A Lean & Green Model for a production cell
Andrea Brasco Pampanelli et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Lean and green in action: interdependencies and performance of pollution prevention projects
Ambra Galeazzo et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Key determinants of lean production adoption: evidence from the aerospace sector
Pedro J. Martinez-Jurado et al.
PRODUCTION PLANNING & CONTROL (2014)
Green supply chain management Drivers, barriers and practices within the Brazilian automotive industry
Everton Drohomeretski et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2014)
Can students evaluate their understanding of cause-and-effect relations? The effects of diagram completion on monitoring accuracy
Mariette H. van Loon et al.
ACTA PSYCHOLOGICA (2014)
A framework to improve construction processes: Integrating Lean, Green and Six Sigma
Abdulaziz Banawi et al.
INTERNATIONAL JOURNAL OF CONSTRUCTION MANAGEMENT (2014)
Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments
Nancy Diaz-Elsayed et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
A Large-Scale Empirical Study of Just-in-Time Quality Assurance
Yasutaka Kamei et al.
IEEE TRANSACTIONS ON SOFTWARE ENGINEERING (2013)
Application of Six-Sigma DMAIC methodology to sand-casting process with response surface methodology
A. Kumaravadivel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Green as the new Lean: how to use Lean practices as a catalyst to greening your supply chain
Christina Maria Dues et al.
JOURNAL OF CLEANER PRODUCTION (2013)
A Review of Engineering Research in Sustainable Manufacturing
Karl R. Haapala et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Modelling lean and green: a review from business models
Susana Duarte et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2013)
Critical success factors of Lean Six Sigma for the Malaysian automotive industry
Nurul Fadly Habidin et al.
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2013)
Using Six Sigma Methodology to Reduce Patient Transfer Times from Floor to Critical-Care Beds
Stephan J. Silich et al.
JOURNAL FOR HEALTHCARE QUALITY (2012)
Six-Sigma: methodology, tools and its future
Yahia Zare Mehrjerdi
ASSEMBLY AUTOMATION (2011)
Tools and techniques for enabling sustainability through lean initiatives
S. Vinodh et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2011)
A system model for green manufacturing
Ahmed M. Deif
JOURNAL OF CLEANER PRODUCTION (2011)
Six Sigma vs Lean Some perspectives from leading academics and practitioners
Jiju Antony
INTERNATIONAL JOURNAL OF PRODUCTIVITY AND PERFORMANCE MANAGEMENT (2011)
Lean Six Sigma - getting better all the time
Ronald D. Snee
INTERNATIONAL JOURNAL OF LEAN SIX SIGMA (2010)
A case study of lean, sustainable manufacturing
Geoff Miller et al.
JOURNAL OF INDUSTRIAL ENGINEERING AND MANAGEMENT-JIEM (2010)
Examining the application of six sigma in the service exchange
Breffni M. Noone et al.
MANAGING SERVICE QUALITY (2010)
Green, lean, and global supply chains
Diane Mollenkopf et al.
INTERNATIONAL JOURNAL OF PHYSICAL DISTRIBUTION & LOGISTICS MANAGEMENT (2010)
The evolution of lean Six Sigma
M. Pepper et al.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2010)
Evaluation of a Digital Library by Means of Quality Function Deployment (QFD) and the Kano Model
Cecilia Garibay et al.
JOURNAL OF ACADEMIC LIBRARIANSHIP (2010)
On the causal link between carbon dioxide and air pollution mortality
Mark Z. Jacobson
GEOPHYSICAL RESEARCH LETTERS (2008)
In pursuit of implementation patterns: the context of Lean and Six Sigma
R. Shah et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2008)
Six Sigma: definition and underlying theory
Roger G. Schroeder et al.
JOURNAL OF OPERATIONS MANAGEMENT (2008)
Applying lean six sigma in a small engineering company - a model for change
Andrew Thomas et al.
JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2008)
Service-dominant logic: continuing the evolution
Stephen L. Vargo et al.
JOURNAL OF THE ACADEMY OF MARKETING SCIENCE (2008)
Analysis of interactions among the barriers of reverse logistics
V Ravi et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2005)
Six sigma in small- and medium-sized UK manufacturing enterprises Some empirical observations
Jiju Antony et al.
INTERNATIONAL JOURNAL OF QUALITY & RELIABILITY MANAGEMENT (2005)