☆ 4.5 Review

High entropy nanomaterials for energy storage and catalysis applications

FRONTIERS IN ENERGY RESEARCH (2023)

Related references

Note: Only part of the references are listed.
Review Materials Science, Multidisciplinary

High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties

Praveen Sathiyamoorthi et al.

Summary: Engineering metallic materials with excellent mechanical properties, especially strength and ductility, are highly sought after for various applications. Novel approaches to enhance strength-ductility synergy through heterogeneous microstructures have proven effective in overcoming the traditional strength-ductility trade-off. The discovery of high entropy alloys based on multi-principal elements offers wider possibilities for alloy design and the exploration of new alloys with remarkable properties.

PROGRESS IN MATERIALS SCIENCE (2022)

Add to Collection
Article Engineering, Environmental

CoNiCuMgZn high entropy alloy nanoparticles embedded onto graphene sheets via anchoring and alloying strategy as efficient electrocatalysts for hydrogen evolution reaction

Danyang Feng et al.

Summary: High entropy alloys have attracted significant interest due to their unique physical and chemical properties. In this study, CoNiCuMgZn high entropy alloy was embedded onto ultrathin two-dimensional holey graphene conducting substrates, resulting in a material with remarkable catalytic activity and stability for hydrogen evolution reaction. The embedded structure of high entropy alloy onto graphene was found to significantly benefit H* sorption and catalytic kinetics.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection
Article Chemistry, Physical

A novel high entropy spinel-type aluminate MAl2O4 (M = Zn, Mg, Cu, Co) and its lithiated oxyfluoride and oxychloride derivatives prepared by one-step mechanosynthesis

Olena Porodko et al.

Summary: This study prepared spinel-type high entropy oxide and its derivatives for the first time, and found that lithium incorporation significantly affects the structure, crystallite size, and oxidation/reduction processes, with poor charge capacity compared to reported high entropy oxides. The mechanochemical route used in this work offers a novel approach for preparing high entropy oxides, lithiated oxyfluorides, and oxychlorides.

ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Two-Dimensional High-Entropy Metal Phosphorus Trichalcogenides for Enhanced Hydrogen Evolution Reaction

Ran Wang et al.

Summary: Developing abundant and efficient electrocatalysts is crucial for the hydrogen energy society. Two-dimensional high-entropy metal phosphorus trichalcogenides serve as excellent catalytic platforms and have demonstrated enhanced HER performance. The combination of high-entropy alloys and 2D materials provides an alternative pathway to design superior catalysts for various electrochemical systems.

ACS NANO (2022)

Add to Collection
Article Chemistry, Physical

Carbothermal shock enabled facile and fast growth of carbon nanotubes in a second

Haomin Wang et al.

Summary: This study presents a new method for synthesizing carbon nanotubes by rapidly heating a carbon substrate, which is simple and efficient. By using carbonized silk fabric as the substrate and applying a pulse voltage treatment, uniform carbon nanotubes can be grown quickly, with potential applications in synthesizing other nanomaterials in the future.

NANO RESEARCH (2022)

Add to Collection
Article Chemistry, Multidisciplinary

High Entropy Alloy Electrocatalytic Electrode toward Alkaline Glycerol Valorization Coupling with Acidic Hydrogen Production

Linfeng Fan et al.

Summary: In this study, a new range of high entropy alloy self-supported electrodes were experimentally prepared and exhibited good electrocatalytic performance in glycerol oxidation reaction. By studying the surface atomic configurations, the catalytic active center was identified, and a hybrid alkali/acid flow electrolytic cell was successfully developed for efficient and stable hydrogen evolution and formate production.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Add to Collection
Review Materials Science, Multidisciplinary

Recent advances in metastable alloys for hydrogen storage: a review

Huai-Jun Lin et al.

Summary: In this review, recent advances in the study of metastable alloys for hydrogen storage applications are comprehensively reviewed. The synthesis methods and hydrogen storage properties of metastable alloys are summarized and discussed, highlighting their unique kinetics and thermodynamics properties. For example, Mg-based amorphous and nanoglass alloys exhibit superior hydrogenation kinetics and higher hydrogen storage capacity, while the immiscible Mg-Mn and Mg-Zr alloys show destabilized thermodynamics properties.

RARE METALS (2022)

Add to Collection
Article Green & Sustainable Science & Technology

The characteristics of excellent electrocatalytic hydrogen evolution for FeCoNi based high entropy alloys

Yu Lu et al.

Summary: This study reports a type of high-entropy-alloy-electrocatalyst and investigates the effect of the C element on the electrocatalytic performance for the hydrogen evolution reaction (HER). The results show that the crystalline Fe35Co25Ni25P7.5C7.5 exhibits superior catalytic activities and stability, achieving a low overpotential of 88 mV at a current density of 10 mA cm-2. This work provides a new insight into the development of high-entropy-alloy-catalysts and enhances the understanding of the alloying effects on the catalytic process.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Nanoporous Surface High-Entropy Alloys as Highly Efficient Multisite Electrocatalysts for Nonacidic Hydrogen Evolution Reaction

Rui-Qi Yao et al.

Summary: This study introduces a novel monolithic nanoporous multielemental CuAlNiMoFe electrode with a high-entropy CuNiMoFe surface as a cost-effective electrocatalyst for hydrogen evolution reaction in alkaline and neutral media. The electrode, with a surface high-entropy alloy and hierarchical nanoporous Cu scaffold, exhibits superior nonacidic HER electrocatalysis.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Hydrogen in energy transition: A review

Ankica Kovac et al.

Summary: The main step towards creating a carbon-neutral society is the implementation of renewable energy sources to replace fossil fuels; while hydrogen technology is recognized as the most promising choice, its large-scale implementation is still in progress. In the coming decades, we can expect the utilization of hydrogen's vast ecological potential.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection
Review Materials Science, Multidisciplinary

Mechanical behavior of high-entropy alloys

Weidong Li et al.

Summary: Research in high-entropy alloys has been booming since the 2010s, focusing on the vast potential in compositions, microstructures, and properties. Efforts are mainly directed towards exploring the compositional space and microstructures, as well as understanding the mechanical behavior. However, there is still a lack of comprehensive studies on the mechanical behavior of high-entropy alloys.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection
Review Materials Science, Multidisciplinary

A critical review on spark plasma sintering of copper and its alloys

Mohammad Abedi et al.

Summary: This article comprehensively investigates the SPS of copper and its alloys, covering the effects of raw powder characteristics, SPS operation parameters on densification of materials, as well as microstructure evolution and grain growth behaviors.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection
Article Chemistry, Physical

Recent progress in high-entropy alloys for catalysts: synthesis, applications, and prospects

K. Li et al.

Summary: High-entropy alloys (HEAs) have attracted great interest in the field of electro/thermo-catalytic clean energy conversion due to their unique characteristics. Research on the synthesis and catalytic applications of HEAs is ongoing, with computationally aided methods playing a crucial role in their design and discovery.

MATERIALS TODAY ENERGY (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Time-resolved study of Pd-Os and Pt-Os nanoalloys formation through thermal decomposition of [Pd(NH3)(4)] [OsCl6] and [Pt(NH3)(4)] [OsCl6] complex salts

T. Asanova et al.

Summary: The mechanisms of formation of Pd-Os and Pt-Os alloys during the thermal decomposition of [Pd(NH3)4][OsCl6] and [Pt(NH3)4][OsCl6] were studied, showing differences in precursor decomposition processes but no significant effects of intermediate products on the final local atomic structure around Os, Pt, and Pd.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection
Review Optics

Recent trends in laser cladding and surface alloying

Anas Ahmad Siddiqui et al.

Summary: Laser cladding and surface alloying techniques are employed to improve surface properties of materials, with proper selection of input parameters significantly enhancing their performance. Research in this area has attracted extensive interest due to the development of high power lasers and improved control mechanisms.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection
Article Chemistry, Physical

Insights into low-carbon hydrogen production methods: Green, blue and aqua hydrogen

Minli Yu et al.

Summary: This study investigates different low-carbon hydrogen production methods, including green hydrogen, blue hydrogen, and aqua hydrogen. To promote the development of the low-carbon hydrogen economy, the paper explores current challenges, future directions, and policy recommendations.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection
Article Multidisciplinary Sciences

Generation of high-density nanoparticles in the carbothermal shock method

Ji-Yoon Song et al.

Summary: The research developed a method for creating high surface coverage nanoparticles using cellulose defect sites, successfully fabricating Cu NPs with high surface coverage and polyelemental alloy NPs, demonstrating high selectivity and stability in electrochemical CO2 reduction reaction.

SCIENCE ADVANCES (2021)

Add to Collection
Article Energy & Fuels

High entropy spinel metal oxide (CoCrFeMnNi)3O4 nanoparticles as a high-performance supercapacitor electrode material

Bhusankar Talluri et al.

Summary: The study synthesized a supercapacitor electrode material based on high entropy spinel oxides (HEO), showing excellent electrochemical energy storage properties including high capacitance, good rate capability, and cycling stability. Additionally, this study opens up possibilities for further exploration of other HEO materials.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Review Energy & Fuels

High entropy alloys as electrode material for supercapacitors: A review

Iftikhar Hussain et al.

Summary: High-entropy alloys (HEAs), as a new material with unique properties, are considered promising electrode materials for energy storage and conversion technologies. The review covers basic knowledge of supercapacitors, including different charge storing mechanisms and device types, as well as recent advances in HEAs as electrode materials.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Polysubstituted High-Entropy [LaNd](Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 Perovskites: Correlation of the Electrical and Magnetic Properties

Vladimir E. Zhivulin et al.

Summary: La-, Nd- and La/Nd-based polysubstituted high-entropy oxides were prepared by solid-state reactions, with their chemical composition correlating well with initial calculated stoichiometry. The electrical and magnetic properties were investigated, showing the dependence of particle size on chemical composition and the observation of spin subsystem states.

NANOMATERIALS (2021)

Add to Collection
Review Materials Science, Multidisciplinary

Additive manufacturing of high entropy alloys: A practical review

Ahmad Ostovari Moghaddam et al.

Summary: The novel concept of high entropy alloys (HEAs) has led to the discovery of several promising materials with outstanding properties. Additive manufacturing (AM) provides new opportunities for fabricating complex HEAs and tailoring their microstructure. Future developments in HEAs are expected as the interest in AM of HEAs continues to grow.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection
Review Materials Science, Multidisciplinary

Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys

Yu Fu et al.

Summary: High-entropy alloys (HEAs) have emerged as a research hotspot in the field of metal materials in the past decade. They exhibit much better corrosion resistance than traditional corrosion-resistant metal materials and the correlation among composition, microstructure, and corrosion resistance of HEAs has been revealed. The influence of heat treatment, anodizing treatment, and preparation methods on the corrosion behavior of HEAs has also been elaborated.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Sub-2 nm Ultrasmall High-Entropy Alloy Nanoparticles for Extremely Superior Electrocatalytic Hydrogen Evolution

Guang Feng et al.

Summary: This study presents ultrasmall high-entropy alloy nanoparticles with superior performance for hydrogen evolution reaction in acidic media, surpassing the commercial Pt/C and Rh/C catalysts. The us-HEA/C demonstrated high mass activity and turnover frequency, along with excellent stability, showcasing the potential of high-entropy alloys as advanced catalysts for energy-related applications.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection
Review Optics

Recent research and development status of laser cladding: A review

Lida Zhu et al.

Summary: This paper provides a detailed introduction to the application of Laser Cladding (LC) in machine parts repairing and functional coating, as well as comprehensive reviews on High Entropy Alloys (HEAs), amorphous alloys, and single crystal alloys in LC. The existing problems and development trends of LC are also discussed in the paper.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection
Review Green & Sustainable Science & Technology

Hydrogen energy systems: A critical review of technologies, applications, trends and challenges

Meiling Yue et al.

Summary: This paper reviews the current progress and outlook of hydrogen technologies and their application in power systems, highlighting the importance of hydrogen in clean energy and pointing out the technical and economic challenges that need to be addressed.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection
Review Engineering, Manufacturing

Research and progress of laser cladding on engineering alloys: A review

Yanan Liu et al.

Summary: Engineering alloys are widely used in high-end engineering industries, but their application is limited by inherent constraints. The development of LC technology offers new approaches for surface modification. This review paper thoroughly investigates recent progress in preparing engineering alloys by LC technology and explores related knowledge and developments in this field.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection
Review Engineering, Manufacturing

A review on laser cladding of high-entropy alloys, their recent trends and potential applications

Zia Ullah Arif et al.

Summary: High-Entropy Alloys (HEAs) have attracted significant attention in the field of material science and engineering, with their promising applications in coatings for challenging conditions. Laser cladding technology has been explored for improving the performance of HEA materials, leading to the development of Laser-Cladded High-Entropy Alloy Coatings (LC-HEACs). This article reviews the current trends and research gaps in LC-HEACs, highlighting the influence of process parameters and techniques to enhance the quality of the coatings.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection
Editorial Material Materials Science, Multidisciplinary

Physical Vapour Deposited Biomedical Coatings

Bryan W. Stuart et al.

Summary: This Special Issue focuses on the developments of Physical Vapour Deposited (PVD) biomedical coatings, particularly in dentistry and orthopaedics. These methods have not yet been widely adopted in the biomedical industry. The new generation of implant coatings can be achieved through innovative approaches.

COATINGS (2021)

Add to Collection
Article Energy & Fuels

How green is blue hydrogen?

Robert W. Howarth et al.

Summary: Despite the lower carbon dioxide emissions, the greenhouse gas emissions from the production of blue hydrogen are still quite high due to the release of fugitive methane. The use of blue hydrogen appears challenging to justify on climate grounds, as even with reduced methane emission rates, the emissions are still greater than simply burning natural gas.

ENERGY SCIENCE & ENGINEERING (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Review and outlook on high-entropy alloys for hydrogen storage

Felipe Marques et al.

Summary: High-entropy alloys (HEAs) have been investigated for hydrogen storage due to their ability to form metal hydrides, with vast compositions presenting potential for promising materials. Effective compositional design and synthesis are crucial in assessing the potential of these alloys. The most promising HEA compositions can be classified into three classes at present: body-centered cubic HEAs, lightweight HEAs, and intermetallic HEAs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Multi-Sites Electrocatalysis in High-Entropy Alloys

Hongdong Li et al.

Summary: High-entropy alloys have unique advantages in electrocatalysis, allowing for the formation of new and tailorable active sites, but further exploration is needed in catalyst design, element interaction, and active site determination. This review focuses on important progress in multi-sites electrocatalysis in HEAs, providing a basis for element selection and design, as well as highlighting remaining challenges and future research directions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Ultrafast Synthesis for Functional Nanomaterials

Rui Jiang et al.

Summary: Nanomaterials with unique functions have attracted extensive attention in the field of energy storage and conversion. The ultrafast synthesis strategy shows great potential in controllable material fabrication. Various ultrafast synthesis approaches and their advantages are introduced, with HTS highlighted as the latest technique for nanomaterials with tunable properties. These recent advances evidence the potential of ultrafast synthesis towards performance-tunable nanosized materials for various applications.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection
Review Multidisciplinary Sciences

Chemical vapour deposition

Luzhao Sun et al.

Summary: Chemical vapour deposition (CVD) is a powerful technology for producing high-quality solid thin films and coatings, continually being developed to adapt to new materials. This overview and best practices in CVD provide insight into future directions by analyzing current limitations and optimizations.

NATURE REVIEWS METHODS PRIMERS (2021)

Add to Collection
Review Chemistry, Physical

Hydrogen production for energy: An overview

Furat Dawood et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection
Article Chemistry, Physical

Nanoporous high-entropy alloys with low Pt loadings for high-performance electrochemical oxygen reduction

Shiyin Li et al.

JOURNAL OF CATALYSIS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Metal-organic framework-derived nanocomposites for electrocatalytic hydrogen evolution reaction

Ziliang Chen et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Hydrogen as an energy vector

Zainul Abdin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

E. P. George et al.

ACTA MATERIALIA (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Recent Advances on High-Entropy Alloys for 3D Printing

Changjun Han et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

A Novel Multinary Intermetallic as an Active Electrocatalyst for Hydrogen Evolution

Zhe Jia et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

High-entropy alloy nanoparticles on aligned electronspun carbon nanofibers for supercapacitors

Xiang Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Laser cladding technique for erosive wear applications: a review

Sarpreet Singh et al.

MATERIALS RESEARCH EXPRESS (2020)

Add to Collection
Article Multidisciplinary Sciences

Synthesis of high-entropy alloy nanoparticles on supports by the fast moving bed pyrolysis

Shaojie Gao et al.

NATURE COMMUNICATIONS (2020)

Add to Collection
Article Materials Science, Ceramics

Chrysanthemum-like high-entropy diboride nanoflowers: A new class of high-entropy nanomaterials

Liu Da et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Spark Plasma Sintering of Titanium Aluminides: A Progress Review on Processing, Structure-Property Relations, Alloy Development and Challenges

Ntebogeng F. Mogale et al.

METALS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

A review of multi-physical fields induced phenomena and effects in spark plasma sintering: Fundamentals and applications

Zheng-Yang Hu et al.

MATERIALS & DESIGN (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Continuous Synthesis of Hollow High-Entropy Nanoparticles for Energy and Catalysis Applications

Xizheng Wang et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Cocktail effects in understanding the stability and properties of face-centered-cubic high-entropy alloys at ambient and cryogenic temperatures

B. X. Cao et al.

SCRIPTA MATERIALIA (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Nanoporous High-Entropy Alloy by Liquid Metal Dealloying

Artem Vladimirovich Okulov et al.

METALS (2020)

Add to Collection
Article Chemistry, Physical

Self- supported high-entropy alloy electrocatalyst for highly efficient H2 evolution in acid condition

Peiyan Ma et al.

JOURNAL OF MATERIOMICS (2020)

Add to Collection
Review Chemistry, Physical

Nano High-Entropy Materials: Synthesis Strategies and Catalytic Applications

Huining Li et al.

SMALL STRUCTURES (2020)

Add to Collection
Article Chemistry, Physical

Large-scale storage of hydrogen

Joakim Andersson et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection
Review Materials Science, Multidisciplinary

High-entropy alloys by mechanical alloying: A review

Mayur Vaidya et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Add to Collection
Review Chemistry, Physical

Fabrication of Porous Materials by Spark Plasma Sintering: A Review

Dina V. Dudina et al.

MATERIALS (2019)

Add to Collection
Article Chemistry, Physical

Deposition of Stainless Steel Thin Films: An Electron Beam Physical Vapour Deposition Approach

Naser Ali et al.

MATERIALS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Entropy-Maximized Synthesis of Multimetallic Nanoparticle Catalysts via a Ultrasonication-Assisted Wet Chemistry Method under Ambient Conditions

Miaomiao Liu et al.

ADVANCED MATERIALS INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

A DFT Study of Hydrogen Storage in High-Entropy Alloy TiZrHfScMo

Jutao Hu et al.

NANOMATERIALS (2019)

Add to Collection
Review Multidisciplinary Sciences

Mechanical Alloying: A Novel Technique to Synthesize Advanced Materials

Challapalli Suryanarayana

RESEARCH (2019)

Add to Collection
Review Chemistry, Physical

Hydrogen energy, economy and storage: Review and recommendation

J. O. Abe et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection
Article Multidisciplinary Sciences

Electrosynthesis of high-entropy metallic glass nanoparticles for designer, multi-functional electrocatalysis

Matthew W. Glasscott et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Review on nanocomposites fabricated by mechanical alloying

Mohammed A. Taha et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

High-temperature materials for structural applications: New perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials

E-Wen Huang et al.

MRS BULLETIN (2019)

Add to Collection
Review Optics

Progress in numerical simulation of the laser cladding process

Nusrat Tamanna et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

Zezhou Li et al.

PROGRESS IN MATERIALS SCIENCE (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Noble Metal-Free Nanoporous High-Entropy Alloys as Highly Efficient Electrocatalysts for Oxygen Evolution Reaction

Hua-Jun Qiu et al.

ACS MATERIALS LETTERS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles

Friedrich Waag et al.

RSC ADVANCES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Scalable 2D Hierarchical Porous Carbon Nanosheets for Flexible Supercapacitors with Ultrahigh Energy Density

Lei Yao et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Electrochemistry

High entropy alloy as a highly active and stable electrocatalyst for hydrogen evolution reaction

Guoliang Zhang et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection
Article Chemistry, Physical

Effect of aluminum element on microstructure evolution and properties of multicomponent Al-Co-Cr-Cu-Fe-Ni nanoparticles

Aiqin Mao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection
Review Chemistry, Physical

A review on fundamental of high entropy alloys with promising high-temperature properties

Jian Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection
Review Materials Science, Multidisciplinary

Development and exploration of refractory high entropy alloys-A review

Oleg N. Senkov et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Aging behavior of the HfNbTaTiZr high entropy alloy

N. D. Stepanov et al.

MATERIALS LETTERS (2018)

Add to Collection
Article Multidisciplinary Sciences

Carbothermal shock synthesis of high-entropy-alloy nanoparticles

Yonggang Yao et al.

SCIENCE (2018)

Add to Collection
Article Multidisciplinary Sciences

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

T. Yang et al.

SCIENCE (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Controlling the Amorphous and Crystalline State of Multinary Alloy Nanoparticles in An Ionic Liquid

Alba Garzon-Manjon et al.

NANOMATERIALS (2018)

Add to Collection
Proceedings Paper Computer Science, Artificial Intelligence

A critical review on the numerical simulation related to Physical Vapour Deposition

G. Pinto et al.

28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY (2018)

Add to Collection
Proceedings Paper Computer Science, Artificial Intelligence

On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications

A. Baptista et al.

28TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM2018): GLOBAL INTEGRATION OF INTELLIGENT MANUFACTURING AND SMART INDUSTRY FOR GOOD OF HUMANITY (2018)

Add to Collection
Article Chemistry, Physical

On Interdiffusion in FeNiCoCrMn High Entropy Alloy

Vivek Verma et al.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2017)

Add to Collection
Review Optics

Research and development status of laser cladding on magnesium alloys: A review

Jianli Liu et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection
Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

Add to Collection
Article Chemistry, Physical

Interdiffusion in the FCC-structured Al-Co-Cr-Fe-Ni high entropy alloys: Experimental studies and numerical simulations

Juliusz Dabrowa et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection
Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

Add to Collection
Article Multidisciplinary Sciences

Polyelemental nanoparticle libraries

Peng-Cheng Chen et al.

SCIENCE (2016)

Add to Collection
Article Metallurgy & Metallurgical Engineering

Spark plasma sintering (SPS) - an advanced sintering technique for structural nanocomposite materials

W. R. Matizamhuka

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

B. Schuh et al.

ACTA MATERIALIA (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Synthesis and electron microscopy of high entropy alloy nanoparticles

Mahander Pratap Singh et al.

MATERIALS LETTERS (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Investigations of quaternary interdiffusion in a constituent system of high entropy alloys

Kaustubh Kulkarni et al.

AIP ADVANCES (2015)

Add to Collection
Review Materials Science, Multidisciplinary

Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments

Olivier Guillon et al.

ADVANCED ENGINEERING MATERIALS (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium

Zhijun Wang et al.

JOM (2014)

Add to Collection
Review Materials Science, Multidisciplinary

Electric pulse consolidation: an alternative to spark plasma sintering

M. S. Yurlova et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Add to Collection
Review Materials Science, Multidisciplinary

Research status of laser cladding on titanium and its alloys: A review

Fei Weng et al.

MATERIALS & DESIGN (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys

K. -Y. Tsai et al.

ACTA MATERIALIA (2013)

Add to Collection
Review Nanoscience & Nanotechnology

Spark Plasma Sintering of Metals and Metal Matrix Nanocomposites: A Review

Nouari Saheb et al.

JOURNAL OF NANOMATERIALS (2012)

Add to Collection
Article Materials Science, Multidisciplinary

Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding

Hui Zhang et al.

MATERIALS & DESIGN (2011)

Add to Collection
Review Materials Science, Multidisciplinary

Spark Plasma Sintering as a Useful Technique to the Nanostructuration of Piezo-Ferroelectric Materials

Teresa Hungria et al.

ADVANCED ENGINEERING MATERIALS (2009)

Add to Collection
Review Engineering, Mechanical

Laser cladding of metals: a review

Loredana Santo

INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING (2008)

Add to Collection
Article Chemistry, Multidisciplinary

Recent progress in high-entropy alloys

Jien-Wei Yeh

ANNALES DE CHIMIE-SCIENCE DES MATERIAUX (2006)

Add to Collection
Review Materials Science, Multidisciplinary

The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method

ZA Munir et al.

JOURNAL OF MATERIALS SCIENCE (2006)

Add to Collection
Review Physics, Applied

Recent developments in plasma assisted physical vapour deposition

JM Schneider et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2000)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.