☆ 4.5 Review

Adsorption of Dyes from Wastewater: A Comprehensive Review

CHEMBIOENG REVIEWS (2023)

Related references

Note: Only part of the references are listed.

Review Environmental Sciences

Adsorptive removal of organic dyes via porous materials for wastewater treatment in recent decades: A review on species, mechanisms and perspectives

Dawei Lan et al.

Summary: This review compares various techniques for the removal of organic dyes in wastewater, with a focus on the latest developments in the use of porous materials. The characteristics, functionalization, and modification of different porous materials are discussed, along with a critical evaluation of the adsorption behavior and mechanism of these materials for the adsorption of organic dyes. Furthermore, challenges and opportunities for future research in the development of novel materials for highly efficient dye removal are proposed.

CHEMOSPHERE (2022)

Add to Collection

Review Environmental Sciences

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

Muhammad Bilal et al.

Summary: This review provides a comprehensive outlook on various bio-sorbents used for the removal of dyes from water. The physicochemical characteristics of the adsorbents and their effects on adsorption potential are evaluated. The study also discusses key parameters that influence the adsorption process and compares the bio-sorbents with other commercial adsorbents.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

Development of eco-friendly CO2-responsive cellulose nanofibril aerogels as green adsorbents for anionic dyes removal

Lin Yang et al.

Summary: A novel CO2-responsive cellulose nanofibril aerogel was successfully prepared as a green adsorbent for anionic dyes removal, exhibiting rapid adsorption rate, high adsorption capacity, and good mechanical properties. The adsorbent can selectively adsorb anionic dyes from aqueous solutions, following the Freundlich isotherm and the pseudo-second-order model in terms of adsorption isotherms and kinetics. Additionally, it showed outstanding recyclability with maintained adsorption performance even after twenty cycles.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Enhanced toxic dye removal from wastewater using biodegradable polymeric natural adsorbent

Khadiza Tul Kubra et al.

Summary: The study investigated the encapsulation of toxic cationic dye methylene blue (MB) by polymeric natural carbohydrate turmeric powder (TP) adsorbent. The research optimized the MB dye adsorption system and quantified the contributions of adsorption and complexation on MB dye removal by TP adsorbent. The study found that TP adsorbent showed favorable dye capturing ability in neutral pH conditions and could be used for efficient removal of organic dyes from water samples to maintain water quality.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Terminalia catappa shell as low-cost biosorbent for the removal of methylene blue from aqueous solutions

Linda Hevira et al.

Summary: This study demonstrated that using Terminalia catappa shells as biosorbent can effectively remove methylene blue from aqueous solutions, with a maximum adsorption capacity of 88.62 mg g(-1), and is applicable to real wastewater samples, which can be reused multiple times.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Add to Collection

Article Chemistry, Applied

Application of graphene-based adsorbents in the treatment of dye-contaminated wastewater; kinetic and isotherm studies

Ferda Mindivan et al.

Summary: This study compared graphene oxide (GO) and reduced graphene oxide (RGO) as graphene-based adsorbents for the adsorption of methylene blue (MB), finding that under certain conditions, GO could effectively remove dyes from aqueous solutions.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Effective adsorption of metals on porphyrins: Experiments and advanced isotherms modeling

Fatma Aouaini et al.

Summary: The investigation focused on the adsorption process of six metal compounds on porphyrin, shedding light on the metals-porphyrin complexes. The experimental results indicated that aluminum and iron complexation should be analyzed using a mono-layer model, while indium compounds interacted with porphyrin via a double-layer model. The physicochemical description revealed that all three metals were adsorbed through a multi-docking mechanism.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Preparation of smart brush-type cation-exchange adsorbents grafted nanosurface via SI-ATRP for dye removal

Zahra Mohamadnia et al.

Summary: This study utilized organic-inorganic hybrid adsorbents to efficiently remove organic dyes from water, through processes including surface modification, grafting polymerization, and ion exchange. The adsorbent demonstrated excellent adsorption performance for methylene blue, with good stability and reusability.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Chemistry, Physical

Highly efficient removal of dyes from wastewater over a wide range of pH value by a self-adaption adsorbent

Quan Hu et al.

Summary: The study developed a self-adaption adsorbent MgO-MCS through a cross-linking/embedding method combining magnetic substances and Chitosan, which could efficiently remove anionic dyes. MgO-MCS showed better adsorption effect and wider application range due to the formation of more micropores and mesopores on its surface.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Novel 3D flower like ZnO/MnV2O6 heterojunction as an efficient adsorbent for the removal of imidacloprid and photocatalyst for degradation of organic dyes in waste water

Sandeep Kaushal et al.

Summary: A novel 3D flower like ZnO/MnV2O6 heterojunction was successfully constructed for efficient removal of imidacloprid pesticide and degradation of dyes. The photocatalytic activities were evaluated with different dosage samples, showing promising results. Factors affecting adsorption and various kinetic models were investigated, with better fitting to pseudo second order kinetics and Langmuir adsorption isotherm model.

POLYHEDRON (2021)

Add to Collection

Article Engineering, Environmental

Synergistic effect of NS co-doped TiO2 adsorbent for removal of cationic dyes

Ruhma Rashid et al.

Summary: The nitrogen and sulfur co-doped TiO2 (NS/TiO2) nanostructures were synthesized and effectively used for dye removal, achieving high removal efficiencies of 99.4% for MB, 98% for MO, and 96% for MR. The adsorbent showed high affinity towards various dyes and could be regenerated in acidic and basic mediums, maintaining good activity even after three repeated cycles.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Removal of yellow dye using composite binded adsorbent developed using natural clay and activated carbon from sapindus seed

M. Ayisha Sidiqua et al.

Summary: An attempt to remove basic yellow dye using a composite adsorbent of clay and activated carbon from sapindus seed was successful, with a removal efficiency of about 86% at alkaline pH of 9. Among the four isotherm models tested, the Freundlich model showed relatively higher R-squared values and better fitting to the experimental data.

BIOCATALYSIS AND AGRICULTURAL BIOTECHNOLOGY (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Study on methylene blue adsorption of activated carbon made from Moringa oleifera leaf

Tra Huong Do et al.

Summary: Activated carbon prepared from Moringa oleifera leaf by NaOH activation (ACB) was effectively used for removing methylene blue (MB) from aqueous solution. The optimal adsorption conditions for MB were pH 7 and adsorbent dosage of 1.67 g/L, with a static adsorption equilibrium time of 90 min. The adsorption process on ACB followed Langmuir, Tempkin, and Freundlich isothermal absorption models, with a maximum adsorption capacity for MB of q(max) = 136.99 mg/g.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Adsorption of methylene blue dye over activated charcoal from the fruit peel of plant hydnocarpus pentandra

Shubhada S. Nayak et al.

Summary: Industrial development has rapidly increased the use of colors and dyes, leading to various forms of pollution. To address this issue, activated charcoal made from plant fruit peel has been developed for the adsorption of dyes like Methylene Blue, showing excellent efficiency.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Evaluation of dyes removal by beta-cyclodextrin adsorbent

Noor Suhailah Sulaiman et al.

Summary: The beta-cyclodextrin (beta-CD) adsorbent has a small specific surface area and rich surface chemistry with acidic oxygen groups, showing good adsorption properties towards methylene blue and congo red dyes. Both dyes exhibit comparable maximum capacities on a molar basis, but beta-CD shows a greater affinity for congo red. The adsorption of congo red is governed by hydrophobic host-guest complex interactions, while that for methylene blue is through weak electrostatic interactions at the hydrophilic exterior of beta-CD.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Environmental

Removal of lithium from aqueous solutions using halotolerant bacteria from El Salar del Hombre Muerto

Fabiana Lilian Martinez et al.

Summary: The interaction between lithium and halotolerant microorganisms can lead to increased biomass production, exopolysaccharide synthesis, and efficient removal of lithium from the surrounding environment. These microbial-metal interactions show promise for environmentally-friendly lithium removal processes.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Review Engineering, Environmental

Guidelines for the use and interpretation of adsorption isotherm models: A review

Mohammad A. Al-Ghouti et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Adsorption of Methylene Blue in Water onto Activated Carbon by Surfactant Modification

Yu Kuang et al.

WATER (2020)

Add to Collection

Article Engineering, Chemical

Kinetics, Isotherms, and Thermodynamic Modeling of the Adsorption of Phosphates from Model Wastewater Using Recycled Brick Waste

Uduakobong A. Edet et al.

PROCESSES (2020)

Add to Collection

Article Chemistry, Physical

Biodegradable natural carbohydrate polymeric sustainable adsorbents for efficient toxic dye removal from wastewater

Md Munjur Hasana et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Eco-friendly chitosan/quartzite composite as adsorbent for dye removal

Jean Cota Coura et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Engineering, Environmental

Bioremediation of dyes: Current status and prospects

Ihsanullah Ihsanullah et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Multifunctional Iron oxide embedded reduced graphene oxide as a versatile adsorbent candidate for effectual arsenic and dye removal

S. S. Pradhan et al.

COLLOID AND INTERFACE SCIENCE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Applied

Ce(III) networked chitosan/β-cyclodextrin beads for the selective removal of toxic dye molecules: Adsorption performance and mechanism

P. Sirajudheen et al.

CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS (2020)

Add to Collection

Article Multidisciplinary Sciences

Synthesis and characterization of Ethiopian kaolin for the removal of basic yellow (BY 28) dye from aqueous solution as a potential adsorbent

Tadele Assefa Aragaw et al.

HELIYON (2020)

Add to Collection

Review Environmental Sciences

Adsorption isotherm models: Classification, physical meaning, application and solving method

Jianlong Wang et al.

CHEMOSPHERE (2020)

Add to Collection

Article Engineering, Environmental

Adsorption performance of graphitic carbon nitride-based materials: Current state of the art

Maciej Fronczak

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Environmental

Azo dye adsorption on an industrial waste-transformed hydroxyapatite adsorbent: Kinetics, isotherms, mechanism and regeneration studies

Hiba Bensalah et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Recovery of iron hydroxides from electro-coagulated sludge for adsorption removals of dye wastewater: Adsorption capacity and adsorbent characteristics

Tadele Assefa Aragaw

SURFACES AND INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorptive removal of methylene blue from aqueous solution on activated carbon prepared from Malawian baobab fruit shell wastes: Equilibrium, kinetics and thermodynamic studies

Ephraim Vunain et al.

SEPARATION SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

The Role of Physisorption and Chemisorption in the Oscillatory Adsorption of Organosilanes on Aluminium Oxide

Ruby A. Sims et al.

POLYMERS (2019)

Add to Collection

Review Environmental Sciences

Recent advances for dyes removal using novel adsorbents: A review

Yanbo Zhou et al.

ENVIRONMENTAL POLLUTION (2019)

Add to Collection

Article Geosciences, Multidisciplinary

Physico-chemical characterization and valorization of swelling and non-swelling Moroccan clays in basic dye removal from aqueous solutions

Yassine Bentahar et al.

JOURNAL OF AFRICAN EARTH SCIENCES (2019)

Add to Collection

Article Chemistry, Applied

An efficient pH sensitive hydrogel, with biocompatibility and high reusability for removal of methylene blue dye from aqueous solution

Rinki Singh et al.

REACTIVE & FUNCTIONAL POLYMERS (2019)

Add to Collection

Article Environmental Sciences

Itaconic acid: an effective sorbent for removal of pollutants from dye industry effluents

B. Bharathiraja et al.

CURRENT OPINION IN ENVIRONMENTAL SCIENCE & HEALTH (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Adsorption removal of tartrazine by chitosan/polyaniline composite: Kinetics and equilibrium studies

Sousna Sahnoun et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Environmental Sciences

High-efficiency extraction of bromocresol purple dye and heavy metals as chromium from industrial effluent by adsorption onto a modified surface of zeolite: Kinetics and equilibrium study

Loai Aljerf

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Add to Collection

Article Engineering, Chemical

Equilibrium isotherms, kinetics, and thermodynamics studies of methylene blue adsorption on pomegranate (Punica granatum) peels as a natural low-cost biosorbent

Ali H. Jawad et al.

DESALINATION AND WATER TREATMENT (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Application of a heterogeneous adsorbent (HA) for the removal of hexavalent chromium from aqueous solutions: Kinetic and equilibrium modeling

Varsha Srivastava et al.

ARABIAN JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Adsorption characteristics for the removal of a toxic dye, tartrazine from aqueous solutions by a low cost agricultural by-product

Sushmita Banerjee et al.

ARABIAN JOURNAL OF CHEMISTRY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Modelling and Interpretation of Adsorption Isotherms

Nimibofa Ayawei et al.

JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Agricultural Engineering

Highly efficient adsorption of cationic dye by biochar produced with Korean cabbage waste

Divine D. Sewu et al.

BIORESOURCE TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Synthesis of low-cost adsorbent from rice bran for the removal of reactive dye based on the response surface methodology

Gui-Bing Hong et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Engineering, Environmental

Exploring the adsorption behavior of cationic and anionic dyes on industrial waste shells of egg

M. A. Abdel-Khalek et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2017)

Add to Collection

Article Ecology

Potential of using green adsorbent of heavy metal removal from aqueous solutions: Adsorption kinetics, isotherm, thermodynamic, mechanism and economic analysis

Rehab M. Ali et al.

ECOLOGICAL ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A new alternative adsorbent for the removal of cationic dyes from aqueous solution

T. Santhi et al.

ARABIAN JOURNAL OF CHEMISTRY (2016)

Add to Collection

Article Environmental Sciences

Optimization and modelling of synthetic azo dye wastewater treatment using Graphene oxide nanoplatelets: Characterization toxicity evaluation and optimization using Artificial Neural Network

Priya Banerjee et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2015)

Add to Collection

Article Water Resources

Adsorption of textile dyes on raw and decanted Moroccan clays: Kinetics, equilibrium and thermodynamics

R. Elmoubarki et al.

WATER RESOURCES AND INDUSTRY (2015)

Add to Collection

Article Chemistry, Physical

Cobalt nanoparticles-embedded magnetic ordered mesoporous carbon for highly effective adsorption of rhodamine B

Lin Tang et al.

APPLIED SURFACE SCIENCE (2014)

Add to Collection

Article Green & Sustainable Science & Technology

Crop Residue Ashes as Adsorbents for Basic Dye (Methylene Blue) Removal: Adsorption Kinetics and Dynamics

Rakesh Kumar Ghosh et al.

CLEAN-SOIL AIR WATER (2014)

Add to Collection

Article Agricultural Engineering

Batch and fixed bed adsorption study for the removal of Drimarine Black CL-B dye from aqueous solution using a lignocellulosic waste: A cost affective adsorbent

Saima Noreen et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

Add to Collection

Article Engineering, Environmental

Preparation of chitosan/poly(acrylic acid) magnetic composite microspheres and applications in the removal of copper(II) ions from aqueous solutions

Han Yan et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Add to Collection

Article Engineering, Environmental

Adsorption and magnetic removal of neutral red dye from aqueous solution using Fe3O4 hollow nanospheres

Mahmood Iram et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Add to Collection

Article Engineering, Environmental

Adsorption of methylene blue onto hazelnut shell: Kinetics, mechanism and activation parameters

Mehmet Dogan et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection

Article Engineering, Environmental

Removal of methylene blue from aqueous solution with silica nano-sheets derived from vermiculite

Mingfei Zhao et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Add to Collection

Article Engineering, Environmental

Removal of anions, heavy metals, organics and dyes from water by adsorption onto a new activated carbon from jatropha husk, an agro-industrial solid waste

C. Namasivayam et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2007)

Add to Collection

Article Engineering, Environmental

Arsenic adsorption onto iron oxide-coated cement (IOCC): Regression analysis of equilibrium data with several isotherm models and their optimization

Sanghamitra Kundu et al.

CHEMICAL ENGINEERING JOURNAL (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.