☆ 4.7 Article

Efficient pre-reduction of chromite ore with biochar under microwave irradiation

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Environmental

Spinel structured MFe2O4 (M = Fe, Co, Ni, Mn, Zn) and their composites for microwave absorption: A review

XiuBo Xie et al.

Summary: This article reviews the recent progress of spinel structured MFe2O4, including synthesis methods, microstructures, and the effects of different components on morphology and microwave absorption performances. The mechanisms of these systems, current challenges, and possible perspectives are also summarized in the article.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

A cleaner method for preparation of chromium oxide from chromite ore

Yijuan Tian et al.

Summary: A new highly efficient and economical process for the production of Cr2O3 from chromite ore was established by investigating the pressurized leaching process, chromium salt separation, and Cr2O3 preparation from BaCrO4. The new method significantly improved Cr leaching rate and separation efficiency, while also enabling the recycling of alkali liquor during the leaching process.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Add to Collection

Review Energy & Fuels

Challenges and opportunities in microwave-assisted catalytic pyrolysis of biomass: A review

Xueyong Ren et al.

Summary: Microwave-assisted catalytic pyrolysis is an emerging technology for converting solid biomass to valuable products. The challenges lie in efficient biomass heating by microwaves and improving product quality through catalysis. Different heating and catalysis strategies have been explored, including direct, indirect, and hybrid heating modes, as well as in-situ, ex-situ, and hybrid catalysis configurations. Techno-economic-environmental assessments have shown the benefits of these strategies, but further research is needed to evaluate integration, synergistic effects, and scaling up.

APPLIED ENERGY (2022)

Add to Collection

Review Chemistry, Applied

Carbon material-TiO2 for photocatalytic reduction of CO2 and degradation of VOCs: A critical review

Dawei Guo et al.

Summary: This review summarizes the research results of carbon material-TiO2 cross-linked structure for the photocatalytic degradation of VOCs and reduction of CO2. It analyzes the impact of environmental factors on photocatalytic efficiency, the characteristics of different modification methods, and the synergistic mechanism of carbon material-TiO2.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Lignocellulosic biomass carbonization for biochar production and characterization of biochar reactivity

Fanzhi Qin et al.

Summary: Lignocellulosic biomass pyrolysis and gasification technologies have been widely explored for the production of bio-oil, syngas, and process heat. The byproduct of this process, biochar, has attracted attention for its potential value in carbon utilization and carbon neutralization. However, there is a lack of systematic studies on the chemical composition and structure changes during the carbonization process of lignocellulosic biomass, as well as the origin of biochar reactivity. This article provides insights into the decomposition/transformation mechanisms of lignocellulosic biomass and the reactivity-related compositions of biochar. The discussion also expands on the origin of biochar's reactivity and potential ways to express its reactivity. The outlook section highlights future directions and prospects for further research and green applications.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetization and microhardness of iron-chromium alloy films electrodeposited from an aqueous solution containing N, N-dimethylformamide

Ryusei Saeki et al.

Summary: In this study, iron-chromium (Fe-Cr) alloy films were successfully synthesized electrochemically and found to have an amorphous nanocrystalline structure. The alloy's grain size decreased and saturation magnetization decreased with an increase in chromium content, while microhardness increased.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Drying characteristics of ammonium polyvanadate under microwave heating based on a thin-layer drying kinetics fitting model

Weiwei Huang et al.

Summary: This study investigates the effect of initial mass, microwave power, and initial moisture content on the drying efficiency of ammonium polyvanadate (APV) using microwave drying. The results show that the average drying rate is positively correlated with microwave output power, and the drying process can be described by the Modified Page model.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Engineering, Chemical

A novel process for highly efficient separation of boron and iron from ludwigite ore based on low-temperature microwave roasting

Lei Ye et al.

Summary: A facile route for simultaneous activation and separation of boron and iron from ludwigite ore at low temperature was developed using the synergistic effect of microwave heating and sodium carbonate. The composite system absorbed microwave energy well and promoted the reduction of iron oxides, resulting in the formation of water-soluble metaborate and the restrain of lizardite decomposition. The separated boron-rich leachate and direct reduced iron powders had superior performance compared to conventional methods.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Cleaner and effective extraction and separation of iron from vanadium slag by carbothermic reduction-chlorination-molten salt electrolysis

Shiyuan Liu et al.

Summary: A new and cleaner method for selective extraction of iron from vanadium slag was developed in this study, involving carbothermal reduction, chlorination, and electrolysis processes. This method demonstrated potential applications for processing materials with high Fe content and low content of other valuable elements.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Thermodynamics

Characteristics and kinetic analysis of pyrolysis of forestry waste promoted by microwave-metal interaction

Longzhi Li et al.

Summary: This study proposed a method of pyrolyzing forestry waste under microwave-metal interaction and found that coupling microwave and metal can enhance pyrolysis efficiency, with the number of metals inserted significantly affecting the pyrolysis behavior.

ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Impedance spectroscopic study of charge transport and relaxation mechanism in MnCr2O4 ceramic chromite

Muhammad Javed et al.

Summary: In this study, MnCr2O4 ceramic oxide was synthesized using a sol-gel method, showing a normal spinel structure. Complex impedance spectroscopy was used to investigate the relaxation times and thermal activation of charge carriers, while an equivalent circuit model was used to analyze the electrical response of the material. The study also highlighted the importance of grains in the conduction mechanism.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Energy and exergy analyses of pellet smelting systems of cleaner ferrochrome alloy with multi-energy supply

Yang Yu et al.

Summary: This study conducted comprehensive energy and exergy analyses on two ferroalloy pellet smelting systems, identifying avoidable exergy destruction and proposing measures for improvement. The environmental impact of the systems was also evaluated, with SPSF found to be more environmentally friendly compared to RKEF. Effective recycling of exhaust gas in the preheating shaft kiln was highlighted as a significant energy-saving measure.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Environmental

Toward environmentally friendly direct reduced iron production: A novel route of comprehensive utilization of blast furnace dust and electric arc furnace dust

Lei Ye et al.

Summary: This study introduces a novel method for producing DRI powders through microwave-assisted self-reduction of core-shell composite pellets composed of BF dust and hazardous EAF dust, followed by magnetic separation. The results demonstrate the efficient utilization of BF and EAF dust, showcasing higher removal percentages of zinc and lead in comparison with conventional methods, and providing a potential solution for environmentally friendly comprehensive waste management in the iron and steel industry.

WASTE MANAGEMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Simulation-based life cycle assessment of ferrochrome smelting technologies to determine environmental impacts

Joseph Hamuyuni et al.

Summary: Decarbonization of metal production is a unique challenge for the industry. Simulation-based life cycle assessment of ferrochrome smelting technologies shows that location affects GHG emissions for producing high carbon ferrochrome, and RK-SAF technology leads to higher acidification and particulate matter emissions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Basic study on microwave carbon-thermal reduction senarmontite (Sb2O3) to produce antimony: High-temperature dielectric properties and a microwave reduction mechanism

Jian Liu et al.

Summary: The study investigated the thermogravimetric and dielectric properties of a mixture ore of Sb2O3 and senarmontite under microwave heating, proposing a mechanism of action for senarmontite and carbon powders. The microwave reduction of senarmontite by carbon powder was divided into three stages, with optimal dielectric properties of the mixture ore reaching between 700°C and 800°C. Characterization of the reduced metal was done via XRD and SEM, showing microwave carbon-thermal reduction of senarmontite as a promising approach for producing antimony with excellent properties.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

An investigation into the co-sintering process of limonitic nickel laterite and low-grade chromite via multi-force fields

Yuxiao Xue et al.

Summary: This study aimed to produce higher-quality Ni-Cr composite sinter for 300 series stainless steel production at a lower cost through the sintering-blast furnace process. By co-sintering limonitic nickel laterite and chromite, with a 15% chromite ratio, the tumble index and productivity were effectively improved, although the solid fuel rate increased gradually. The application of multi-force fields further enhanced sinter quality and reduced solid fuel consumption, but slightly decreased productivity.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Efficient utilization of nickel rich Chromite Ore Processing Tailings by carbothermic smelting

Pankaj Kumar et al.

Summary: Chromite ore processing tailings, a solid waste with ultra-fine size, poses challenges in recovery due to the difficulty in handling such fine particles. However, studies have shown that through smelting, high-quality metal products can be obtained from these tailings, promoting resource utilization and zero discharge.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Engineering, Chemical

Carbothermic reduction roasting for processing of ferruginous chromite ore using conventional and microwave heating

Sunil Kumar Tripathy et al.

Summary: The study investigates the recovery of chromite from low-grade ferruginous ore using carbothermic magnetization route with conventional and microwave heating sources. Alteration of crystalline structure and magnetic property of gangue minerals enables the separation of low-grade ore through magnetic separation. The research achieved successful upgrading of the ore through optimal roasting conditions and under microwave radiation, with discussion of findings through characterization tools.

ADVANCED POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Utilization of blast furnace sludge for the removal of zinc from steelmaking dusts using microwave heating

Mamdouh Omran et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Preparation of core-shell iron ore-biochar composite pellets for microwave reduction

Lei Ye et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Damring Formation During Rotary Kiln Chromite Pre-reduction: Effects of Pulverized Carbonaceous Fuel Selection and Partial Pellet Melting

Y. van Staden et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

Add to Collection

Article Chemistry, Applied

Microwave dielectric properties of Malaysian palm oil and agricultural industrial biomass and biochar during pyrolysis process

Arshad Adam Salema et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Phase transformation of iron in limonite ore by microwave roasting with addition of alkali lignin and its effects on magnetic separation

Fangfang Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Thermodynamics

Co-torrefaction of sewage sludge and leucaena by using microwave heating

Yu -Fong Huang et al.

ENERGY (2016)

Add to Collection

Article Chemistry, Applied

Effect of microwave irradiation on the grinding characteristics of Ximeng lignite

Jie-Feng Zhu et al.

FUEL PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Carbothermic Reduction of Synthetic Chromite with/without the Addition of Iron Powder

Xianfeng Hu et al.

ISIJ INTERNATIONAL (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Na2B4O7 Addition on Carbothermic Reduction of Ilmenite Concentrate

Bing Song et al.

ISIJ INTERNATIONAL (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Evaluation of the Furnace Method for the Production of Low Carbon Ferrochrome

H. Weitz et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Evaluation of the Furnace Method for the Production of Low Carbon Ferrochrome

H. Weitz et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Solid State Reduction of Preoxidized Chromite-iron Ore Pellets by Coal

Jian Pan et al.

ISIJ INTERNATIONAL (2015)

Add to Collection

Article Chemistry, Physical

Microwave absorption behavior in Cr2O3 nanopowders

H. Montiel et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Microwave-assisted metallurgy

Zhiwei Peng et al.

INTERNATIONAL MATERIALS REVIEWS (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering

Sanjay Agarwal et al.

ISIJ INTERNATIONAL (2014)

Add to Collection

Article Energy & Fuels

Evaluation of CO2-reactivity patterns in cokes from coal and woody biomass blends

M. A. Diez et al.

FUEL (2013)

Add to Collection

Article Energy & Fuels

Microwave Absorption Capability of High Volatile Bituminous Coal during Pyrolysis

Zhiwei Peng et al.

ENERGY & FUELS (2012)

Add to Collection

Article Chemistry, Applied

Reactivity of bio-coke with CO2

K. W. Ng et al.

FUEL PROCESSING TECHNOLOGY (2011)

Add to Collection

Review Engineering, Chemical

Chrome ore beneficiation challenges & opportunities - A review

Y. Rama Murthy et al.

MINERALS ENGINEERING (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microwave Penetration Depth in Materials with Non-zero Magnetic Susceptibility

Zhiwei Peng et al.

ISIJ INTERNATIONAL (2010)

Add to Collection

Article Chemistry, Physical

Synthesis of pristine and carbon-coated Li4Ti5O12 and their low-temperature electrochemical performance

Tao Yuan et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Sintering Characteristics of Indian Chrome Ore Fines

Bikash Nandy et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2009)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Temperature rise characteristics of carbon-containing chromite ore fines in microwave field

Li Ning et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2008)

Add to Collection

Article Multidisciplinary Sciences

Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond

AC Ferrari et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.