4.7 Article

Best thermoelectric efficiency of ever-explored materials

Related references

Note: Only part of the references are listed.
Article Multidisciplinary Sciences

A record thermoelectric efficiency in tellurium-free modules for low-grade waste heat recovery

Zhonglin Bu et al.

Summary: Traditional thermoelectric materials for low-grade heat recovery suffer from tellurium scarcity and high cost. This study demonstrates the use of cheap antimonides for even more efficient thermoelectric waste-heat recovery.

NATURE COMMUNICATIONS (2022)

Article Multidisciplinary Sciences

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Zihang Liu et al.

Summary: This work maximizes the electronic properties of the n-type Mg3.2Bi1.5Sb0.5 material through delicate microstructural design, resulting in a high zT value over a broad temperature range. Additionally, a breakthrough is achieved in the non-Bi2Te3 thermoelectric module for room-temperature power generation and cooling, indicating potential commercial applications.

NATURE COMMUNICATIONS (2022)

Article Mathematics, Applied

Unique temperature distribution and explicit efficiency formula for one-dimensional thermoelectric generators under constant Seebeck coefficients

Jaywan Chung et al.

Summary: A thermoelectric generator's energy conversion efficiency is determined by the steady-state temperature distribution, which can be solved by a second-order integro-differential equation with a unique solution. The efficiency can be calculated using the temperature-dependent thermal conductivity and electrical resistivity of the thermoelectric material.

NONLINEAR ANALYSIS-REAL WORLD APPLICATIONS (2022)

Article Multidisciplinary Sciences

High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics

Binbin Jiang et al.

Summary: By manipulating the localization of electrons and phonons through entropy manipulation, we provide a new approach to improve the performance of high-entropy thermoelectric materials.

SCIENCE (2022)

Article Energy & Fuels

Neural network-assisted optimization of segmented thermoelectric power generators using active learning based on a genetic optimization algorithm

Wabi Demeke et al.

Summary: In this study, a systematic approach leveraging deep learning is proposed to efficiently explore and optimize the design of segmented thermoelectric legs. By combining finite element analysis and neural network modeling with a genetic optimization algorithm, high-performance design candidates are identified and the model is updated using validation results to achieve optimization of thermoelectric legs.

ENERGY REPORTS (2022)

Article Physics, Applied

Effect of defect interactions with interstitial Ag in the lattice of BixSb2-xTe3 alloys and their thermoelectric properties

Jae Ki Lee et al.

Summary: In this study, the impact of Ag defects on the lattice and thermoelectric properties of Ag-doped BixSb2-xTe3 (BST) alloys is systematically investigated. The presence of Ag interstitial defects affects the formation of intrinsic defects in the host materials, leading to optimized defects and doping density by varying the Bi content. Furthermore, the formation of nanoscale twin structures with various stacking faults reduces the phonon thermal conductivity, ultimately achieving a high figure of merit of 1.4 at 423K for p-type BST alloys.

APPLIED PHYSICS LETTERS (2021)

Article Multidisciplinary Sciences

High-entropy-stabilized chalcogenides with high thermoelectric performance

Binbin Jiang et al.

Summary: By utilizing entropy-driven structural stabilization, we increased the figure of merit (zT) value to 1.8 in an n-type PbSe-based high-entropy material at 900 kelvin, showcasing a promising method to enhance the performance of thermoelectric materials.

SCIENCE (2021)

Article Chemistry, Physical

Overcoming Asymmetric Contact Resistances in Al-Contacted Mg2(Si,Sn) Thermoelectric Legs

Julia Camut et al.

Summary: The efficiency of thermoelectric generators is crucially dependent on minimizing electrical contact resistance, which can be asymmetric in samples due to factors like oxide layers and dicing. Sputtering a thin layer of Zn after etching the Al surface proves to be an effective method in keeping contact resistivities low after dicing. The slight gradient in the n-type leg's Seebeck coefficient after contacting with the Zn-coated electrode confirms the role of Zn in this change.

MATERIALS (2021)

Article Multidisciplinary Sciences

Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys

Zhonglin Bu et al.

Summary: GeTe alloys have shown high conversion efficiency and thermoelectric performance, with good stability and durability within the working temperature range. By optimizing the carrier concentration and phonon scattering effects of the material, GeTe alloys achieve efficient thermoelectric device design.

SCIENCE ADVANCES (2021)

Article Chemistry, Physical

Demonstration of ultrahigh thermoelectric efficiency of ∼7.3% in Mg3Sb2/MgAgSb module for low-temperature energy harvesting

Zihang Liu et al.

Summary: Researchers have made significant advancements in thermoelectric materials by adding minor amounts of Cu to the Mg3Sb1.5Bi0.5 system, leading to improved thermoelectric performance and reduced thermal conductivity. Through grain-boundary engineering, the detrimental effects of thermally activated electrical conductivity were successfully eliminated. The fabricated thermoelectric module, when combined with a p-type alpha-MgAgSb-based material, showed promising potential for low-temperature thermoelectric harvesting.

JOULE (2021)

Article Thermodynamics

Thermal contact resistance evaluation of a thermoelectric system by means of three I-V curves

Braulio Beltran-Pitarch et al.

Summary: The new method presented in the study involves performing three I-V curves to determine the ohmic resistance, TE resistance, and thermal contact resistance of a TE device in contact with heat sink and heat source. The method is advantageous as it does not require complex setups or measurement of heat fluxes, providing accurate measurements under operating conditions with small temperature differences.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Chemistry, Physical

Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal

Chongjian Zhou et al.

Summary: The research found that by controlling the purity of tin reagents and removing tin oxide impurities, the thermal conductivity of SnSe polycrystalline samples can be reduced, resulting in excellent performance with ZT of 3.1 at 783 K.

NATURE MATERIALS (2021)

Article Multidisciplinary Sciences

Thermoelectric degrees of freedom determining thermoelectric efficiency

Byungki Ryu et al.

Summary: The traditional theory of thermoelectric materials based on a single parameter zT is inaccurate. The thermoelectric conversion efficiency is actually determined by three independent parameters: Z(gen), tau, and beta. Increasing any of these three degrees of freedom can lead to higher efficiency, suggesting a new direction in material discovery and device design beyond zT.

ISCIENCE (2021)

Article Chemistry, Multidisciplinary

An over 10% module efficiency obtained using non-Bi2Te3 thermoelectric materials for recovering heat of <600 K

Zhonglin Bu et al.

Summary: Thermoelectric technology, traditionally limited by Bi2Te3 alloys, has shown potential for higher efficiency with the development of new materials like p-GeTe and n-Mg3Sb2. These non-Bi2Te3 materials could significantly improve waste-heat recovery applications, indicating a promising future for thermoelectric technology.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

High efficiency GeTe-based materials and modules for thermoelectric power generation

Tong Xing et al.

Summary: GeTe-based materials have shown great potential in thermoelectric generators for waste heat recovery. A high-energy conversion efficiency of 7.8% was achieved in a GeTe-based thermoelectric module. By using a high-throughput strategy, Mo was identified as an effective diffusion barrier material, leading to the fabrication of a module with comparable energy conversion efficiency to other materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Thermodynamics

Characterization of thermal contacts between heat exchangers and a thermoelectric module by impedance spectroscopy

Braulio Beltran-Pitarch et al.

APPLIED THERMAL ENGINEERING (2020)

Article Physics, Applied

Counterintuitive example on relation between ZT and thermoelectric efficiency

Byungki Ryu et al.

APPLIED PHYSICS LETTERS (2020)

Article Chemistry, Physical

Half-Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density

Junjie Yu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Realizing record high performance in n-type Bi2Te3-based thermoelectric materials

Bin Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Materials Science, Multidisciplinary

Data-driven analysis of electron relaxation times in PbTe-type thermoelectric materials

Yukari Katsura et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2019)

Review Materials Science, Multidisciplinary

Thermoelectrics: From history, a window to the future

Davide Beretta et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2019)

Article Chemistry, Multidisciplinary

High thermoelectric performance in Bi0.46Sb1.54Te3 nanostructured with ZnTe

Rigui Deng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Phase Boundary Mapping to Obtain n-type Mg3Sb2-Based Thermoelectrics

Saneyuki Ohno et al.

JOULE (2018)

Editorial Material Chemistry, Multidisciplinary

Figure of merit ZT of a thermoelectric device defined from materials properties

G. Jeffrey Snyder et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Multidisciplinary

High thermoelectric performance of p-BiSbTe compounds prepared by ultra-fast thermally induced reaction

Gang Zheng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Multidisciplinary Sciences

Superparamagnetic enhancement of thermoelectric performance

Wenyu Zhao et al.

NATURE (2017)

Article Chemistry, Physical

Grain Boundary Engineering for Achieving High Thermoelectric Performance in n-Type Skutterudites

Xianfu Meng et al.

ADVANCED ENERGY MATERIALS (2017)

Article Materials Science, Multidisciplinary

Ultra-high average figure of merit in synergistic band engineered Sn x Na 1− x Se 0.9 S 0.1 single crystals

Kunling Peng et al.

Materials Today (2017)

Article Chemistry, Multidisciplinary

High efficiency Bi2Te3-based materials and devices for thermoelectric power generation between 100 and 300 degrees C

Feng Hao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules

Xiaokai Hu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Review Nanoscience & Nanotechnology

Organic thermoelectric materials for energy harvesting and temperature control

Boris Russ et al.

NATURE REVIEWS MATERIALS (2016)

Article Physics, Applied

Characterization of half-Heusler unicouple for thermoelectric conversion

Xiaokai Hu et al.

JOURNAL OF APPLIED PHYSICS (2015)

Article Multidisciplinary Sciences

Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials

Chenguang Fu et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

High Efficiency Half-Heusler Thermoelectric Materials for Energy Harvesting

Tiejun Zhu et al.

ADVANCED ENERGY MATERIALS (2015)

Article Materials Science, Multidisciplinary

Flexible thermoelectric materials and device optimization for wearable energy harvesting

Je-Hyeong Bahk et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Article Materials Science, Multidisciplinary

Thermoelectric properties of rare earth-doped n-type Bi2Se0.3Te2.7 nanocomposites

Fang Wu et al.

BULLETIN OF MATERIALS SCIENCE (2014)

Article Engineering, Electrical & Electronic

Thermoelectric Modules Based on Half-Heusler Materials Produced in Large Quantities

Kilian Bartholome et al.

JOURNAL OF ELECTRONIC MATERIALS (2014)

Article Engineering, Electrical & Electronic

Thermoelectric Generation Using Waste Heat in Steel Works

Takashi Kuroki et al.

JOURNAL OF ELECTRONIC MATERIALS (2014)

Article Engineering, Electrical & Electronic

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Huiyuan Geng et al.

JOURNAL OF ELECTRONIC MATERIALS (2013)

Article Physics, Applied

Enhanced thermoelectric figure-of-merit in spark plasma sintered nanostructured n-type SiGe alloys

Sivaiah Bathula et al.

APPLIED PHYSICS LETTERS (2012)

Article Multidisciplinary Sciences

High-performance bulk thermoelectrics with all-scale hierarchical architectures

Kanishka Biswas et al.

NATURE (2012)

Article Materials Science, Multidisciplinary

Doping effect on thermoelectric properties of nonstoichiometric AgSbTe2 compounds

Sheng-nan Zhang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2011)

Article Engineering, Electrical & Electronic

Segmented Generator Modules Using Bi2Te3-Based Materials

L. I. Anatychuk et al.

JOURNAL OF ELECTRONIC MATERIALS (2011)

Article Engineering, Electrical & Electronic

Electrical, Thermal, and Mechanical Characterization of Novel Segmented-Leg Thermoelectric Modules

Jonathan D'Angelo et al.

JOURNAL OF ELECTRONIC MATERIALS (2011)

Article Materials Science, Multidisciplinary

Half-Heusler phases and nanocomposites as emerging high-ZT thermoelectric materials

S. Joseph Poon et al.

JOURNAL OF MATERIALS RESEARCH (2011)

Article Multidisciplinary Sciences

Convergence of electronic bands for high performance bulk thermoelectrics

Yanzhong Pei et al.

NATURE (2011)

Article Engineering, Electrical & Electronic

Modeling the Building Blocks of a 10% Efficient Segmented Thermoelectric Power Generator

D. T. Crane et al.

JOURNAL OF ELECTRONIC MATERIALS (2009)

Review Chemistry, Multidisciplinary

New directions for low-dimensional thermoelectric materials

Mildred S. Dresselhaus et al.

ADVANCED MATERIALS (2007)

Article Materials Science, Multidisciplinary

Thermal conductance of interfaces between highly dissimilar materials

HK Lyeo et al.

PHYSICAL REVIEW B (2006)

Article Multidisciplinary Sciences

Cubic AgPbmSbTe2+m:: Bulk thermoelectric materials with high figure of merit

KF Hsu et al.

SCIENCE (2004)

Article Physics, Multidisciplinary

Thermoelectric efficiency and compatibility

GJ Snyder et al.

PHYSICAL REVIEW LETTERS (2003)

Article Physics, Applied

Thermoelectric properties of heavily GaP- and P-doped Si0.95Ge0.05

O Yamashita

JOURNAL OF APPLIED PHYSICS (2001)