☆ 4.7 Article

Preparation of SOFC Anodes at Lower Temperature with Boosted Electrochemical Performance

ACS APPLIED ENERGY MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Performance and DRT analysis of infiltrated functional cathode based on the anode supported SOFCs with long-term stability

Ziwei Zheng et al.

Summary: The relationship between morphology and kinetics of oxygen reduction reaction (ORR) in cathode functional layer (CFL) is studied. A highly efficient and robust CFL is prepared by infiltrating method, which shows significantly enhanced ORR activity. This study provides insights for improving the performance of solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Applied

Surface oxidation of Ni-cermet electrodes by CO2 and H2O and how to moderate it

Dingkai Chen et al.

Summary: The oxidation behavior of nickel in H2O and CO2 atmospheres on different ceramic metal electrodes was studied. It was found that the resistance of nickel to oxidation depends on the ceramic type, with Ni-GDC showing higher resistance to CO2 oxidation compared to Ni-YSZ. Modifying the electrode surface with ceria nanoparticles can enhance its resistance to CO2 oxidation, offering a promising fabrication strategy for high-performance solid oxide electrolysis cells for CO2 conversion.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Optimization of La0.2Sr0.7-xCaxTi0.95Fe0.05O3-δ Fuel Electrode Stoichiometry for Solid Oxide Fuel-Cell Application

Sara Paydar et al.

Summary: Development of active ceramic hydrogen electrodes with high stability is crucial for the advancement of solid oxide fuel cells (SOFC). In this study, a series of cubic perovskite-type La/Ca/Fe-doped strontium titanates (LSCTF) were synthesized and evaluated for their crystallographic and electrical properties, catalytic activity, stability, and performance as fuel electrodes in SOFC. The results showed that LSCTF materials behave like semiconductors, and the conductivity, catalytic activity, and stability of the electrodes are significantly influenced by the Ca concentration in the A-site. The optimal composition of La0.2Sr0.35Ca0.35Ti0.95Fe0.05O3-delta fuel electrode exhibited a low polarization resistance value and the fuel cell with a 50 wt % La0.2Sr0.35Ca0.35Ti0.95Fe0.05O3-delta + 50 wt % Ce0.9Gd0.1O2-delta anode demonstrated high power density.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

In-situ exsolution of Ni nanoparticles to achieve an active and stable solid oxide fuel cell anode catalyst on A-site deficient La0.4Sr0.4Ti0.94Ni0.06O3-3

Jong Jun Lee et al.

Summary: (La,Sr)TiO3 is a promising anode material for solid oxide fuel cells due to its high electronic conductivity and superior phase stability, but its low catalytic activity is a major obstacle. Exsolution of Ni nanoparticles on Ni-doped A-site deficient La0.4Sr0.4TiO3-3 was found to significantly improve the electrocatalytic activity and performance of SOFCs, leading to higher power density and enhanced stability. These results highlight the effectiveness of exsolution in enhancing the electrocatalytic activity of perovskite materials like (La,Sr)TiO3.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Add to Collection

Article Electrochemistry

Examining Operando Generated Ni-Based Alloy Nanomaterials as Fuel Electrodes in Solid Oxide Cells

X. Yue et al.

Summary: Constructing nanostructures through exsolution has been demonstrated as an effective approach for producing electrode materials with superior performance and stability in solid oxide cells. This study focuses on investigating titanate perovskites with exsolved Ni-Co alloy nanocatalysts as fuel electrodes for SOCs, particularly emphasizing the operando generation of active nanomaterials through electrochemical switching in a CO2 atmosphere.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Electrochemistry

An approach to the analysis of the impedance spectra of solid oxide fuel cell using the DRT technique

D. A. Osinkin

Summary: This paper introduces the use of Distribution of Relaxation Times (DRT) technique for analyzing the impedance spectra of fuel cells to determine the polarization resistance of the cathode and anode. By comparing and analyzing the DRT functions obtained under different experimental conditions, an accurate measurement of the polarization resistance can be achieved.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Coupling decreased polarization resistance Sr0.95Ti0.3Fe0.6Ni0.1O3-δ cathode with efficient metal supported Solid Oxide Fuel Cell

Weijie Ni et al.

Summary: A low polarization resistance heterostructure cathode was successfully constructed in this study, showing high efficiency in a solid oxide fuel cell with electrical efficiencies over 90% and a maximum electrical power density of 740 mW/cm(2).

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

Zhishan Li et al.

Summary: The research utilized A-site deficient perovskite oxide decorated with in-situ exsolved Ni-Co nano-alloy as a potential fuel electrode for SOFC/SOEC, showing significant enhancements in cell performance. The study revealed that A-site non-stoichiometry and B-site dopant concentration greatly influenced the formation of oxygen vacancies and exsolution of B-site cations during the exsolution process.

FRONTIERS IN CHEMISTRY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ru exsolution in substituted La0.75Sr0.25Cr0.5Mn0.5O3-delta compound as anode material for an IT-SOFCs

L. Thommy et al.

Summary: This study presents the synthesis of the LSC0.4MRu0.1 compound and compares its conductivity with LSCM and LSCM0.3Ni0.2. Results show that Ru substitution leads to increased total conductivity, while Ni substitution decreases conductivity. The reduced Ru-substituted compound shows potential for use as an anode material in SOFCs, but the high temperature decomposition and reduction processes should be carefully considered.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Energy & Fuels

Enhancing Ni Exsolution by Nonmetal B-Site Substituents (Si and P) in SrTiO3-Based Solid Oxide Fuel Cell Anodes

Md Raziun Bin Mamtaz et al.

Summary: In this study, Si and P were utilized as B-site nonmetal substitutes to enhance the electrochemical performance of the model SOFC anode SrTiO3-delta. The first-principles calculations and experimental results demonstrated that Si- or P-substitution can promote Ni diffusion and segregation, improving the area-specific resistance and stability of the electrodes. This research opens up new avenues for utilizing nonmetal substituents in perovskite oxides to aid Ni exsolution, thereby enhancing the electrochemical activity.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

(La,Sr)(Ti,Fe)O3-δ perovskite with in-situ constructed FeNi3 nanoparticles as fuel electrode for reversible solid oxide cell

Lijie Zhang et al.

Summary: This study developed a high performance fuel electrode material by utilizing in-situ metal exsolution to form FeNi3 nanoparticles, which improved the electrochemical performance of RSOC and demonstrated stable performance through operation tests.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Thermodynamics

The role of solid oxide fuel cells in future ship energy systems

Francesco Baldi et al.

ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Replacement of Ca by Ni in a Perovskite Titanate to Yield a Novel Perovskite Exsolution Architecture for Oxygen-Evolution Reactions

Jin Goo Lee et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Model-guided design of a high performance and durability Ni nanofiber/ceria matrix solid oxide fuel cell electrode

Mengzheng Ouyang et al.

Journal of Energy Chemistry (2020)

Add to Collection

Article Chemistry, Physical

Co-generation of electricity and olefin via proton conducting fuel cells using (Pr0.3Sr0.7)0.9Ni0.1Ti0.9O3 catalyst layers

Nai Shi et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Chemistry, Physical

Ternary Ni-Co-Fe Exsolved Nanoparticles/Perovskite System for Energy Applications: Nanostructure Characterization and Electrochemical Activity

Mariano Santaya et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Review Energy & Fuels

A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks

Zezhi Zeng et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

Detailed insight into processes of reversible solid oxide cells and stacks using DRT analysis

Vanja Subotic et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Multidisciplinary Sciences

Electrochemical conversion of methane to ethylene in a solid oxide electrolyzer

Changli Zhu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Structural and electrochemical property evolutions of perovskite SOFC anodes: Role of fuel atmosphere in (La0.4Sr0.6)1-xCo0.2Fe0.7Nb0.1O3-δ

Tenglong Zhu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal Stability of an in Situ Exsolved Metallic Nanoparticle Structured Perovskite Type Hydrogen Electrode for Solid Oxide Cells

Tianhang Zhang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Co-electrolysis of H2O and CO2 on exsolved Ni nanoparticles for efficient syngas generation at controllable H2/CO ratios

V. Kyriakou et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Electrochemistry

Nanofiber-based La0.4Sr0.6TiO3-Gd0.2Ce0.8O1.9-Ni composite anode for solid oxide fuel cells

Qianjun Hu et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Electrochemistry

Exploration of Co-Fe alloy precipitation and electrochemical behavior hysteresis using Lanthanum and Cobalt co- substituted SrFeO3- (delta) SOFC anode

Xiaoyang Chen et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Materials Science, Ceramics

Photocatalytic activity of CaTiO3 synthesized by solid state, sol-gel and hydrothermal methods

Chong Han et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Electrochemistry

The Electrochemical Properties of Sr(Ti,Fe)O3-δ for Anodes in Solid Oxide Fuel Cells

Andreas Nenning et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Proceedings Paper Electrochemistry

Anode Concentration Polarization in Solid Oxide Fuel Cells as a Dissipative Process

Anil V. Virkar

SOLID OXIDE FUEL CELLS 15 (SOFC-XV) (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Enhancing Perovskite Electrocatalysis of Solid Oxide Cells Through Controlled Exsolution of Nanoparticles

Bin Hua et al.

CHEMSUSCHEM (2017)

Add to Collection

Article Chemistry, Multidisciplinary

New Opportunity for in Situ Exsolution of Metallic Nanoparticles on Perovskite Parent

Yi-Fei Sun et al.

NANO LETTERS (2016)

Add to Collection

Article Electrochemistry

Influence of the Discretization Methods on the Distribution of Relaxation Times Deconvolution: Implementing Radial Basis Functions with DRTtools

Ting Hei Wan et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

Electrochemical performance and stability of La0.2Sr0.8Ti0.9Ni0.1O3-δ and La0.2Sr0.8Ti0.9Ni0.1O3-δ - Gd0.2Ce0.8O2-δ anode with anode interlayer in H2 and CH4

Byung Hyun Park et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Physical

Titanium-substituted lanthanum strontium ferrite as a novel electrode material for symmetrical solid oxide fuel cell

Zhiqun Cao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Multidisciplinary Sciences

Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution

Dragos Neagu et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Electrochemistry

Optimal Regularization in Distribution of Relaxation Times applied to Electrochemical Impedance Spectroscopy: Ridge and Lasso Regression Methods - A Theoretical and Experimental Study

Mattia Saccoccio et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes

Emiliana Fabbri et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Electrochemistry

Electrochemical Analysis of Reformate-Fuelled Anode Supported SOFC

A. Kromp et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection

Letter Nanoscience & Nanotechnology

The Scherrer equation versus the 'Debye-Scherrer equation'

Uwe Holzwarth et al.

NATURE NANOTECHNOLOGY (2011)

Add to Collection

Article Chemistry, Physical

Influence of milling conditions on the mechanochemical synthesis of CaTiO3 nanoparticles

Samayamutthirian Palaniandy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Electrochemistry

Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells

A. Leonide et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)

Add to Collection

Article Electrochemistry

Electrochemical characterization of La0.6Sr0.4Co0.2Fe0.8O3 cathodes for intermediate-temperature SOFCs

A Esquirol et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.