☆ 4.7 Article

Solid-State Synthesis and Characterization of Mg-Substituted P2-Na0.70Ni0.45Mn0.55O2 Cathode Materials for Practical Sodium-Ion Batteries

ADVANCED SUSTAINABLE SYSTEMS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Synergetic stability enhancement with magnesium and calcium ion substitution for Ni/Mn-based P2-type sodium-ion battery cathodes

Hongwei Fu et al.

Summary: The study successfully doped magnesium and calcium ions into Na0.67Ni0.33Mn0.67O2 to improve cycling endurance by reducing O-type stacking in the high-voltage region, leading to a decrease in capacity. Density functional theory studies showed that the introduction of Mg2+ and Ca2+ made high-voltage reactions less accessible.

CHEMICAL SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Role of the voltage window on the capacity retention of P2-Na2/3[Fe1/2Mn1/2]O2 cathode material for rechargeable sodium-ion batteries

Maider Zarrabeitia et al.

Summary: This article investigates the factors contributing to the capacity fading of P2-Na-2/3[Fe1/2Mn1/2]O-2 cathode material for sodium-ion batteries. Through experimental and theoretical analysis, it is found that the observed capacity fading is mainly attributed to the structural phase transition at high voltage, which leads to an increase in bulk electronic resistance.

COMMUNICATIONS CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Stable Electrochemical Properties of Magnesium-Doped Co-Free Layered P2-Type Na0.67Ni0.33Mn0.67O2 Cathode Material for Sodium Ion Batteries

Jie Feng et al.

Summary: In this study, a novel cobalt-free layered P2-type Na0.67Ni0.33Mn0.67O2 cathode material was designed and synthesized. The effect of Mg doping on the electrochemical performance and structural stability of the material was investigated, and it was found that Mg ion doping can effectively improve the electrochemical performance and structural stability of the material.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Review Energy & Fuels

Multiphase layered transition metal oxide positive electrodes for sodium ion batteries

Eric Gabriel et al.

Summary: Multiphase layered transition metal oxides with phase interfaces across multiple length scales show promise as positive electrodes for sodium ion batteries. The combination of different phases can enhance strengths and mitigate weaknesses through carefully controlled interfaces. The design, synthesis, and characterization strategies for heterogeneous, multiphasic layered transition metal oxides with phase interfaces at various length scales are examined in this review.

ENERGY SCIENCE & ENGINEERING (2022)

Add to Collection

Article Chemistry, Analytical

P2-type layered structure Na1.0Li0.2Mn0.7Ti0.1O2 as a superb electrochemical performance cathode material for sodium-ion batteries

Nguyen To et al.

Summary: A new P2-type layered structure Na1.0Li0.2Mn0.7Ti0.1O2 material was successfully synthesized in this study, showing superior specific capacity and cycle performance, indicating its potential as a promising cathode material for sodium ion batteries.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Effects of chelating agents on electrochemical properties of Na0.9Ni0.45Mn0.55O2 cathode materials

Zengsheng Liu et al.

Summary: The synthesis of layered cathode material for sodium ion batteries using sol-gel method is hindered by unclear selection criteria for complexing agents. In this study, Na0.9Ni0.45Mn0.55O2 cathode is successfully prepared using different chelating agents, with citric acid showing the best electrochemical performance. The XRD and HRTEM analysis confirm that the optimized sample maintains better phase and interfacial stability, making it significant for understanding the selection criteria for cathode chelators in sodium-ion batteries synthesis.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Cation Chelation and Reassembly Route to Synthesize a P2-type Na0.67Ni0.26Mn0.67Mg0.07O2 Cathode Material for High-performance Sodium Storage

Chouwei Xie et al.

Summary: A one-dimensional Na0.67Ni0.26Mn0.67Mg0.07O2 (Na-NMM) cathode material with uniform element distribution was successfully prepared using a facile cation chelation and reassembly route. The Na-NMM cathode exhibited good performance as a cathode material for sodium-ion batteries, showing high reversible capacity and cycling stability.

CHEMNANOMAT (2021)

Add to Collection

Article Chemistry, Physical

Na-ion mobility in P2-type Na0.5MgxNi0.17-xMn0.83O2 (0 ≤ x ≤ 0.07) from electrochemical and muon spin relaxation studies

Le Anh Ma et al.

Summary: In this study, sodium transition metal oxides with a layered structure were investigated as cathode materials for Na+-ion batteries. The research utilized electrochemical and muon spin rotation and relaxation techniques to study the Na+-ion mobility in a specific cathode material. The results indicated that a small amount of Mg substitution significantly influenced the cycling performance and Na+ mobility, with the composition containing x = 0.02 showing the best stability and highest Na+ mobility.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Add to Collection

Article Chemistry, Physical

Impact of Mg and Ti doping in O3 type NaNi1/2Mn1/2O2 on reversibility and phase transition during electrochemical Na intercalation

Kei Kubota et al.

Summary: By substituting Mg and Ti into the NaNi1/2Mn1/2O2 material, it is possible to improve its capacity capability and make the capacity more sustainable. The co-substitution of Mg and Ti not only enhances the reversibility of structural changes but also improves the surface structural stability of the material, leading to excellent performance in sodium batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Review Chemistry, Multidisciplinary

The Cathode Choice for Commercialization of Sodium-Ion Batteries: Layered Transition Metal Oxides versus Prussian Blue Analogs

Qiannan Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress of P2-Type Layered Transition-Metal Oxide Cathodes for Sodium-Ion Batteries

Liu Zhengbo et al.

CHEMISTRY-A EUROPEAN JOURNAL (2020)

Add to Collection

Article Electrochemistry

Improving electrochemical performance of Na3(VPO4)2O2F cathode materials for sodium ion batteries by constructing conductive scaffold

Linnan Bi et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

On controlling the P2-O2 phase transition by optimal Ti-substitution on Ni-site in P2-type Na0.67Ni0.33Mn0.67O2 (NNMO) cathode for Na-ion batteries

Debanjana Pahari et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Physical

Exploration of Advanced Electrode Materials for Rechargeable Sodium-Ion Batteries

Yang Sun et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium-Ion Batteries

Qiannan Liu et al.

SMALL (2019)

Add to Collection

Article Engineering, Chemical

Enhanced Structural, Electrochemical, and Electrode Kinetic Properties of Na0.5Ni0.2Mg0.1Mn0.7O2 Material for Sodium-Ion Battery Applications

Jian Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries

Qin-Chao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

High Energy Density Sodium-Ion Battery with Industrially Feasible and Air-Stable O3-Type Layered Oxide Cathode

Jianqiu Deng et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3-xMgxMn2/3O2 ( 0 r x r 0.2) cathodes from diffraction, electrochemical and ab initio studies

Nuria Tapia-Ruiz et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Review Chemistry, Physical

Sodium-Ion Battery Materials and Electrochemical Properties Reviewed

Kudakwashe Chayambuka et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced cycle stability of Na0.9Ni0.45Mn0.55O2 through tailoring O3/P2 hybrid structures for sodium-ion batteries

Jie Chen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Will Sodium Layered Oxides Ever Be Competitive for Sodium Ion Battery Applications?

Sathiya Mariyappan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Readiness Level of Sodium-Ion Battery Technology: A Materials Review

Lin Chen et al.

ADVANCED SUSTAINABLE SYSTEMS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Na3V2(PO4)(3)/C Positive Electrodes with High Energy and Power Densities for Sodium Secondary Batteries with Ionic Liquid Electrolytes That Operate across Wide Temperature Ranges

Jinkwang Hwang et al.

ADVANCED SUSTAINABLE SYSTEMS (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Synthesis of Iron Phosphate and Their Composites for Lithium/Sodium Ion Batteries

Jinying Shao et al.

ADVANCED SUSTAINABLE SYSTEMS (2018)

Add to Collection

Article Electrochemistry

Layered P2-type Na0.5Ni0.25Mn0.75O2 as a high performance cathode material for sodium-ion batteries

P. Manikandan et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance

Shaohua Guo et al.

NPG ASIA MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

New insights into designing high-rate performance cathode materials for sodium ion batteries by enlarging the slab-spacing of the Na-ion diffusion layer

Zheng-Yao Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Review Chemistry, Physical

Transition metal oxides for sodium-ion batteries

Heng Su et al.

ENERGY STORAGE MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

A Comparative Study of Layered Transition Metal Oxide Cathodes for Application in Sodium-Ion Battery

Ivana Hasa et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage

Dipan Kundu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Chemistry, Physical

Rate Dependent Performance Related to Crystal Structure Evolution of Na0.67Mn0.8Mg0.2O2 in a Sodium-Ion Battery

Neeraj Sharma et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

High-quality Prussian blue crystals as superior cathode materials for room-temperature sodium-ion batteries

Ya You et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Sidorenkite (Na3MnPO4CO3): A New Intercalation Cathode Material for Na-Ion Batteries

Hailong Chen et al.

CHEMISTRY OF MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

Electrochemical performance of mixed valence Na3V2O2x(PO4)2F3-2x/C as cathode for sodium-ion batteries

Paula Serras et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

An advanced cathode for Na-ion batteries with high rate and excellent structural stability

Dae Hoe Lee et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Prussian blue: a new framework of electrode materials for sodium batteries

Yuhao Lu et al.

CHEMICAL COMMUNICATIONS (2012)

Add to Collection

Article Electrochemistry

Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries

Prabeer Barpanda et al.

ELECTROCHEMISTRY COMMUNICATIONS (2012)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Study on the Reversible Electrode Reaction of Na1-xNi0.5Mn0.5O2 for a Rechargeable Sodium-Ion Battery

Shinichi Komaba et al.

INORGANIC CHEMISTRY (2012)

Add to Collection

Article Chemistry, Physical

High voltage cathode materials for Na-ion batteries of general formula Na3V2O2x(PO4)2F3-2x

Paula Serras et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

New Iron-Based Mixed-Polyanion Cathodes for Lithium and Sodium Rechargeable Batteries: Combined First Principles Calculations and Experimental Study

Hyungsub Kim et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.