☆ 4.6 Article

Kraft lignin valorization: Biofuels and thermoset materials in focus

CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

A New Family of Renewable Thermosets: Kraft Lignin Poly-adipates

Davide Di Francesco et al.

Summary: In this study, a two-step procedure was developed to produce a thermoset material from sustainable sub-components. The cross-linking between KL lignin and AdA was activated using an acetylating agent, resulting in the formation of a cross-linking mixture. The esterification reactions were confirmed by spectroscopy, and the material transformed into a thermoset through heating.

CHEMSUSCHEM (2022)

Add to Collection

Article Agricultural Engineering

Biobased rigid polyurethane foam using gradient acid precipitated lignin from the black liquor: Revealing the relationship between lignin structural features and polyurethane performances

Hui Cao et al.

Summary: This study investigates the characteristics of bio-sourced synthesized RPF using lignin fractionated from the alkaline black liquor of corn stover. Results show that lignin isolated in a specific pH range can improve the compressive strength, thermal stability, and reduce density and thermal conductivity of RPF. The research also explores the relationship between lignin structural features and RPF properties.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Agricultural Engineering

From acetone fractionation to lignin-based phenolic and polyurethane resins

Maryam Arefmanesh et al.

Summary: This study used acetone fractionation to increase the homogeneity of softwood kraft lignin and develop new products. The acetone soluble and insoluble fractions were analyzed for their elemental composition, chemical structure, and thermal properties. The acetone soluble fraction showed an increase of 24% in phenolic hydroxyl content. It was used to replace phenol in phenolic resin, resulting in a higher adhesion strength. The acetone insoluble fraction, on the other hand, was used to replace petroleum-based polyol in polyurethane resin, with the help of a bio-derived solvent. Tailoring the structure of kraft lignin through solvent fractionation allowed for the replacement of two major petrochemicals in resin formulations, which would otherwise be challenging due to the heterogeneity of softwood kraft lignin.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

A lignin-based epoxy/TiO2 hybrid nanoparticle for multifunctional bio-based epoxy with improved mechanical, UV absorption and antibacterial properties

Jiayao Yang et al.

Summary: In this study, a multifunctional bio-based epoxy composite was successfully prepared by synthesizing lignin-based epoxy/titanium dioxide hybrid nanoparticles, improving its mechanical strength and toughness, as well as enhancing thermal stability, UV absorption, and antibacterial properties.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin-Glyoxal: A Fully Biobased Formaldehyde-Free Wood Adhesive for Interior Engineered Wood Products

Mohsen Siahkamari et al.

Summary: In this study, a biobased phenolic adhesive was developed by replacing petroleum-based phenol and formaldehyde with unmodified corn stover biorefinery lignin and glyoxal. The synthesized lignin-glyoxal resin showed higher molecular weight than the starting lignin, indicating successful integration. The adhesive demonstrated high dry adhesion strength and stability in room temperature water.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Add to Collection

Article Agricultural Engineering

Rational analysis of dispersion and solubility of Kraft lignin in polyols for polyurethanes

Hima Haridevan et al.

Summary: This study investigates the dispersion of KL in various polyols and suggests that the compatibility of KL with polyols depends on their chemical structure and molecular weight. The study provides insights for the engineering design of polyurethane materials incorporating KL.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Forestry

Towards understanding kraft lignin depolymerisation under hydrothermal conditions

Anders Ahlbom et al.

Summary: This study found that hydrothermal liquefaction can rapidly depolymerize kraft lignin in the initial stages, but as time progresses, there are less pronounced structural changes, indicating a recalcitrant carbon-carbon skeleton remains in the products. Additionally, the yields of char and monomers slowly increase with reaction time, necessitating careful tuning of the reaction time.

HOLZFORSCHUNG (2022)

Add to Collection

Article Agricultural Engineering

Catalytic hydrothermal liquefaction of alkali lignin over activated bio-char supported bimetallic catalyst

Bijoy Biswas et al.

Summary: Carbon-based support catalysts play a crucial role in optimizing the hydrothermal liquefaction of alkali lignin, leading to increased bio-oil yield through efficient depolymerization. The use of ethanol solvent system, higher reaction temperatures, and increased catalyst quantities results in enhanced conversion and selectivity towards vanillin.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Catalytic hydrotreatment of Kraft lignin into liquid fuels over porous ZnCoOx nanoplates

Xiaomeng Dou et al.

Summary: A novel ZnCoOx nanoplate catalyst was prepared for the efficient depolymerization of Kraft lignin into liquid fuels, demonstrating the potential for sustainable utilization of lignin.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Hydrothermal Depolymerization of Kraft Lignins with Green C1-C3 Alcohol-Water Mixtures

Ming Guo et al.

Summary: Lignin, a potential renewable raw material, can be synthesized into aromatic molecules and materials, with Kraft-type lignins being abundantly available as a byproduct of wood and paper industries. A study investigating the depolymerization of two different technical lignins using a mixture of short-chain alcohols and water as solvents showed promising results, with high yield and no char-forming side reactions observed. The depolymerization process resulted in monomers and lignin residues with lower molecular weight, indicating a synergistic effect between isopropanol and water without any observed repolymerization reactions.

ENERGY & FUELS (2021)

Add to Collection

Article Agricultural Engineering

Demethylation, phenolation, and depolymerization of lignin for the synthesis of lignin-based epoxy resin via a one-pot strategy

Xiang Zhen et al.

Summary: A one-pot method for synthesizing demethylated-phenolated lignin (DPL) and demethylated-phenolated lignin based epoxy resin (DPLINP) using phenol as a phenolic reagent was proposed. The introduction of phenol significantly reduced polycondensation, decreased molecular weight, and increased phenolic hydroxyl content in DPL compared with DL and PL. The resulting DPLINP exhibited improved mechanical performance and thermal stability.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Exploring the Effects of Different Cross-Linkers on Lignin-Based Thermoset Properties and Morphologies

Iuliana Ribca et al.

Summary: The study demonstrates the utilization of lignin-based thermoset resins with different cross-linkers and the tuning of resin properties through chemical modification and the use of various cross-linkers. Despite lignin's heterogeneity, it is possible to produce thermosetting materials with tunable properties.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Solvent-Resistant Lignin-Epoxy Hybrid Nanoparticles for Covalent Surface Modification and High-Strength Particulate Adhesives

Tao Zou et al.

Summary: The study introduces a simple method to stabilize LNPs through intraparticle cross-linking. Hybrid LNPs were prepared by coprecipitating lignin with a cross-linker BADGE, allowing for intraparticle cross-linking without affecting colloidal stability; the internally crosslinked particles demonstrated high stability under strongly alkaline conditions and in organic solvents.

ACS NANO (2021)

Add to Collection

Article Agricultural Engineering

Hydroconversion of Kraft lignin for biofuels production using bifunctional rhenium-molybdenum supported zeolitic imidazolate framework nanocatalyst

Ge Guo et al.

Summary: The bimetallic ReMo@ZNB catalyst showed excellent catalytic activity in lignin depolymerization, with high product yields and a high calorific value of 32.33 MJ/kg, indicating potential for improving lignin hydroconversion. The catalyst also demonstrated superior recyclability and regeneration, with structural changes induced by the incorporation of ReMo leading to improved hydrogenation and acid adsorption properties.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Agricultural Engineering

Catalytic hydrothermal liquefaction of lignin for production of aromatic hydrocarbon over metal supported mesoporous catalyst

Li Feng et al.

Summary: Catalytic hydrothermal liquefaction of lignin was studied using different solvents and catalyst conditions, revealing that Ni-Al/MCM-41 catalyst achieved the highest bio-oil yield in ethanol solvent. Alcoholic solvents promoted lignin decomposition, while water solvent significantly improved lignin degradation in the presence of catalyst.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Debottlenecking a Pulp Mill by Producing Biofuels from Black Liquor in Three Steps

Davide Di Francesco et al.

Summary: By using mild reagents for esterification and recycling acetic anhydride and acetic acid, lignin is successfully converted into lignin esters for fuel production, thereby increasing the efficiency of pulp production.

CHEMSUSCHEM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin to Monoaromatics with a Carbon-Nanofiber-Supported Ni-CeO2-x Catalyst Synthesized in a One-Pot Hydrothermal Process

Aderlanio Cardoso et al.

Summary: A one-pot catalyst synthesis method has been developed for Ni-CeO2-x supported on carbon nanofibers, allowing for the conversion of Kraft lignin in supercritical water with a high yield of 79% bio-oil, primarily composed of monoaromatics. This approach achieved lignin breakdown without the need for noble metal catalysts, molecular H-2, or cosolvents, resulting in reduced catalyst synthesis time and unit operations and a desirable yield of a chemically uniform product fraction.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

The Promotor and Poison Effects of the Inorganic Elements of Kraft Lignin during Hydrotreatment over NiMoS Catalyst

Joby Sebastian et al.

Summary: In the deoxygenation process of kraft lignin to aromatics, the presence of impurities has a significant impact on the activity of the catalyst, with some impurities obstructing depolymerization and leading to catalyst deactivation. However, at lower loadings, impurities can also act as promoters, counteracting the negative effects during depolymerization.

CATALYSTS (2021)

Add to Collection

Article Chemistry, Physical

Thermal annealing effects on hydrothermally synthesized unsupported MoS2 for enhanced deoxygenation of propylguaiacol and kraft lignin

You Wayne Cheah et al.

Summary: Catalytic hydrodeoxygenation (HDO) is crucial for producing high-quality biomass-derived fuel components and chemicals. The study focuses on enhancing unsupported MoS2 catalysts through post-annealing treatment, leading to improved deoxygenation activity and efficiency.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

Efficient depolymerization of lignins to alkylphenols using phosphided NiMo catalysts

Jessi Osorio Velasco et al.

Summary: The study explores the catalytic hydrotreatment of Kraft lignin to alkylphenols using non-precious metal, sulfur tolerant catalysts on different supports, with the best catalyst being the NiMoP catalyst on SiO2. The results show no clear relations between support characteristics and performance, with the exception of support acidity, where intermediate acidity is required for best performance.

CATALYSIS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Guidelines for performing lignin-first biorefining

Mahdi M. Abu-Omar et al.

Summary: The valorisation of lignin is crucial for the economic viability of the lignocellulosic biorefining industry. The lignin-first biorefining approach, which considers lignin valorisation in the design phase, has been shown to make the fullest use of lignocellulose. Despite the diverse approaches to reporting and analyzing results from lignin-first methods, we propose guidelines for analyzing critical data in order to facilitate direct comparisons between studies.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Enzymatic demethylation of Kraft lignin for lignin-based phenol-formaldehyde resin applications

Balaji Venkatesagowda et al.

BIOMASS CONVERSION AND BIOREFINERY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Catalytic Lignin Depolymerization to Aromatic Chemicals

Chaofeng Zhang et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Add to Collection

Article Agricultural Engineering

Catalytic hydrotreatment of kraft lignin into aromatic alcohols over nickel-rhenium supported on niobium oxide catalyst

Liping Kong et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Co-hydrotreatment of the Bio-oil Lignin-Rich Fraction and Vegetable Oil

Yinglei Han et al.

ENERGY & FUELS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Lignin-Based Epoxy Resins: Unravelling the Relationship between Structure and Material Properties

Claudio Gioia et al.

BIOMACROMOLECULES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lignin Depolymerization under Continuous-Flow Conditions: Highlights of Recent Developments

Omar Y. Abdelaziz et al.

CHEMSUSCHEM (2020)

Add to Collection

Review Energy & Fuels

Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin

Jukka Lappalainen et al.

ENERGIES (2020)

Add to Collection

Article Energy & Fuels

Combining expansion in pulp capacity with production of sustainable biofuels - Techno-economic and greenhouse gas emissions assessment of drop-in fuels from black liquor part-streams

Yawer Jafri et al.

APPLIED ENERGY (2020)

Add to Collection

Article Polymer Science

Synthesis of High-Water-Resistance Lignin-Phenol Resin Adhesive with Furfural as a Crosslinking Agent

Yufei Zhang et al.

POLYMERS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

A Two-Step Approach for the Conversion of Technical Lignins to Biofuels

Monique B. Figueiredo et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and Morphological Properties of Lignin-Based Thermosets

Marcus E. Jawerth et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Agricultural Engineering

Formic acid assisted liquefaction of lignin in water and ethanol, investigated for a 0.025 and a 5 L batch reactor: Comparison of yields and compositions of the products

Solmaz Ghoreishi et al.

BIOMASS & BIOENERGY (2019)

Add to Collection

Article Engineering, Chemical

Phenol-Enhanced Depolymerization and Activation of Kraft Lignin in Alkaline Medium

Linhuo Gan et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Polymer Science

Thermoplastic and moisture-dependent behavior of lignin phenol formaldehyde resins

Pia Solt et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

One-Pot Synthesis of Lignin Thermosets Exhibiting Widely Tunable Mechanical Properties and Shape Memory Behavior

Yunsheng Xu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Energy & Fuels

Technoeconomic assessment of hydrothermal liquefaction oil from lignin with catalytic upgrading for renewable fuel and chemical production

LiLu T. Funkenbusch et al.

WILEY INTERDISCIPLINARY REVIEWS-ENERGY AND ENVIRONMENT (2019)

Add to Collection

Review Polymer Science

The Use of Chitosan, Alginate, and Pectin in the Biomedical and Food Sector-Biocompatibility, Bioadhesiveness, and Biodegradability

Gheorghe Adrian Martau et al.

POLYMERS (2019)

Add to Collection

Article Engineering, Chemical

Upgrading of Kraft Lignin-Derived Bio-Oil over Hierarchical and Nonhierarchical Ni and/or Zn/HZSM5 Catalysts

Ashutosh Agarwal et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrotreatment of Kraft Lignin to Alkylphenolics and Aromatics Using Ni, Mo, and W Phosphides Supported on Activated Carbon

Ramesh Kumar Chowdari et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Lignin-Based Polyurethanes from Unmodified Kraft Lignin Fractionated by Sequential Precipitation

Yun-Yan Wang et al.

ACS APPLIED POLYMER MATERIALS (2019)

Add to Collection

Article Energy & Fuels

Continuous catalytic depolymerisation and conversion of industrial kraft lignin into low-molecular-weight aromatics

Omar Y. Abdelaziz et al.

BIOMASS CONVERSION AND BIOREFINERY (2018)

Add to Collection

Article Agricultural Engineering

Insight into structure-reactivity relationships for the iron-catalyzed hydrotreatment of technical lignins

Idoia Hita et al.

BIORESOURCE TECHNOLOGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

Zhuohua Sun et al.

CHEMICAL REVIEWS (2018)

Add to Collection

Article Energy & Fuels

Hydrothermal Liquefaction of Kraft Lignin in Subcritical Water: Influence of Phenol as Capping Agent

Tallal Belkheiri et al.

ENERGY & FUELS (2018)

Add to Collection

Article Engineering, Chemical

Catalytic Hydrotreatment of Kraft Lignin over NiW/SiC: Effective Depolymerization and Catalyst Regeneration

Shi Qiu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Tunable Thermosetting Epoxies Based on Fractionated and Well-Characterized Lignins

Claudio Gioia et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Identification of a diagnostic structural motif reveals a new reaction intermediate and condensation pathway in kraft lignin formation

Christopher S. Lancefield et al.

CHEMICAL SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Phenolation to Improve Lignin Reactivity toward Thermosets Application

Xiao Jiang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Catalytic Fast Pyrolysis of Kraft Lignin With Conventional, Mesoporous and Nanosized ZSM-5 Zeolite for the Production of Alkyl-Phenols and Aromatics

Polykarpos A. Lazaridis et al.

FRONTIERS IN CHEMISTRY (2018)

Add to Collection

Article Energy & Fuels

Production of Phenol-Rich Monomers from Kraft Lignin Hydrothermolysates in Basic-Subcritical Water over MoO3/SBA-15 Catalyst

Masud Rana et al.

ENERGY & FUELS (2018)

Add to Collection

Article Polymer Science

Lignin Phenol Formaldehyde Resoles Using Base-Catalysed Depolymerized Kraft Lignin

Pia Solt et al.

POLYMERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Yields of Bio Oils from Hydrothermal Processing of Thin Black Liquor without the Use of Catalysts or Capping Agents

Alexander Orebom et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Multidisciplinary

On the structure of softwood kraft lignin

Claudia Crestini et al.

GREEN CHEMISTRY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Utilization of cyclocarbonated lignin as a bio-based cross-linker for the preparation of poly(hydroxy urethane)s

Anika Salanti et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental Studies on the Hydrotreatment of Kraft Lignin to Aromatics and Alkylphenolics Using Economically Viable Fe-Based Catalysts

Shilpa Agarwal et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Green Diesel from Kraft Lignin in Three Steps

Joakim Lofstedt et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Chemistry, Analytical

Simultaneous catalytic de-polymerization and hydrodeoxygenation of lignin in water/formic acid media with Rh/Al2O3, Ru/Al2O3 and Pd/Al2O3 as bifunctional catalysts

Mikel Oregui Bengoechea et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

Add to Collection

Article Chemistry, Physical

Catalytic depolymerisation and conversion of Kraft lignin into liquid products using near-critical water

Thi Dieu Huyen Nguyen et al.

JOURNAL OF SUPERCRITICAL FLUIDS (2014)

Add to Collection

Review Chemistry, Applied

A review on lignin-based polymeric, micro- and nano-structured materials

Antoine Duval et al.

REACTIVE & FUNCTIONAL POLYMERS (2014)

Add to Collection

Review Multidisciplinary Sciences

Lignin Valorization: Improving Lignin Processing in the Biorefinery

Arthur J. Ragauskas et al.

SCIENCE (2014)

Add to Collection

Review Reproductive Biology

Bisphenol A and human health: A review of the literature

Johanna R. Rochester

REPRODUCTIVE TOXICOLOGY (2013)

Add to Collection

Review Agricultural Engineering

Black liquor gasification integrated in pulp and paper mills: A critical review

M. Naqvi et al.

BIORESOURCE TECHNOLOGY (2010)

Add to Collection

Review Chemistry, Multidisciplinary

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Joseph Zakzeski et al.

CHEMICAL REVIEWS (2010)

Add to Collection

Article Energy & Fuels

Towards a lignincellulosic biorefinery: Direct one-step conversion of lignin to hydrogen-enriched biofuel

Mike Kleinert et al.

ENERGY & FUELS (2008)

Add to Collection

Article Materials Science, Paper & Wood

Increased capacity in kraft pulp mills: Lignin separation and reduced steam demand compared with recovery boiler upgrade

Erik Axelsson et al.

NORDIC PULP & PAPER RESEARCH JOURNAL (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.