☆ 4.7 Article

Improving the Solar Energy Utilization of Perovskite Solar Cells via Synergistic Effects of Alkylamine and Alkyl Acid on Defect Passivation

SOLAR RRL (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Surface Passivation Toward Efficient and Stable Perovskite Solar Cells

Junmin Xia et al.

Summary: Metal halide perovskites are popular for efficient photovoltaic devices, but defects from the preparation process hinder performance improvement. Surface passivation is a practical approach to suppress these defects, and this review provides a comprehensive summary of different passivation methods and discusses future research trends.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Add to Collection

Article Energy & Fuels

Effective Inhibition of Phase Segregation in Wide-Bandgap Perovskites with Alkali Halides Additives to Improve the Stability of Solar Cells

Xin Meng et al.

Summary: The effect of alkali halides additives on the photoinduced phase segregation of wide-bandgap perovskites is systematically studied, and it is found that potassium chloride (KCl) is the most effective additive in suppressing the phase segregation. This is because KCl can reduce iodine vacancy defects and couple with accumulated iodide ions at the grain boundaries, effectively inhibiting phase segregation. The KCl-modified wide-bandgap perovskite solar cells exhibit a champion efficiency of 19.34% and can maintain 93% of the initial efficiency after 500 hours of light soaking, outperforming the reference device without KCl modification which retains only 72% of its initial efficiency.

SOLAR RRL (2023)

Add to Collection

Article Engineering, Environmental

Multifunctional alkylamines enable defect passivation and energy level alignment for efficient and stable inverted CsPbI3 perovskite solar cells

Zuxiong Xu et al.

Summary: Surface modification improves the defect passivation and energy level alignment of CsPbI3 perovskite films, resulting in increased efficiency and stability of perovskite solar cells.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Over 21% Efficiency Stable 2D Perovskite Solar Cells

Ming Shao et al.

Summary: This study fabricated 2D perovskite solar cells incorporating FA, MA, and FA/MA, resulting in significantly enhanced light absorption and device stability. The introduction of FA cations increased the 3D-like phase relative to 2D phases and effectively suppressed the formation of the yellow delta phase.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

High-performance perovskite solar cells based on dopant-free hole-transporting material fabricated by a thermal-assisted blade-coating method with efficiency exceeding 21%

Kun-Mu Lee et al.

Summary: A new donor-acceptor-donor type hole-transporting material CB was synthesized and used in fully printed PSCs, achieving an impressive power conversion efficiency of up to 21.09% with improved long-term stability. The CB-based devices showed better performance compared to those using doped spiro-OMeTAD under the same conditions, demonstrating CB's potential as a promising candidate for high-performance fully printable PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Eliminating the Perovskite Solar Cell Manufacturing Bottleneck via High-Speed Flexography

Julia E. Huddy et al.

Summary: A fast manufacturing process for perovskite solar cells was proposed. By using flexographic printing and rapid annealing, inorganic charge transport layers for perovskites were successfully fabricated, improving the photovoltaic performance. This method is fast and efficient, providing potential for large-scale manufacturing.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Article Energy & Fuels

Efficient and Stable All-Inorganic CsPbIBr2 Perovskite Solar Cells Enabled by Dynamic Vacuum-Assisted Low-Temperature Engineering

Junyi Huang et al.

Summary: The VALT-CsPbIBr2 film prepared through dynamic vacuum-assisted low-temperature engineering shows superior performance in optical properties and microstructure, leading to increased efficiency and stability of perovskite solar cells.

SOLAR RRL (2022)

Add to Collection

Review Energy & Fuels

Progress in Spray Coated Perovskite Films for Solar Cell Applications

Li-Hui Chou et al.

Summary: This article introduces the advantages and applications of spray coating technology in producing large-area perovskite solar cells and modules. The impact of one-step and two-step spray coating strategies on film quality and photovoltaic performance is also discussed.

SOLAR RRL (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: A review

Amin Alizadeh et al.

Summary: Inorganic perovskite and spinel materials show desirable characteristics and have the potential to be used as photoanode materials in DSSCs. The study demonstrates that employing certain amounts of perovskite or spinel materials can enhance the power conversion efficiency of fabricated DSSCs.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Donor-π-Acceptor Type Porphyrin Derivatives Assisted Defect Passivation for Efficient Hybrid Perovskite Solar Cells

Chi-Lun Mai et al.

Summary: The results of the study demonstrate that D-pi-A type porphyrin derivatives are promising passivators for improving the cell performance of PSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Poly(N,N′-bis-4-butylphenyl-N,N′-bisphenyl)benzidine-Based Interfacial Passivation Strategy Promoting Efficiency and Operational Stability of Perovskite Solar Cells in Regular Architecture

Erdi Akman et al.

Summary: The study addresses the issue of degradation in perovskite solar cells (PSCs) over time, caused by environmental factors such as humidity, heat, and light. By treating the perovskite surfaces with polyTPD molecules, the research significantly suppresses defect-mediated non-radiative recombination in PSCs, resulting in improved efficiency and stability. The ultra-hydrophobic polyTPD passivant also helps to prevent moisture penetration, leading to a high retention of initial efficiencies after storage and operational conditions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

20.8% Slot-Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO-Content and Age of 2-ME Based Precursor Inks

Jinzhao Li et al.

Summary: Efficiency records for solution-processed solar cell devices incorporating metal-halide perovskite semiconductors continue to be broken, with the need for scalable process technology and optimized ink formulations highlighted for large-area prototypes. The study demonstrates the importance of rational insights into ink composition and process control for reproducible manufacturing of MHP-based devices. The addition of a limited amount of DMSO prevents the formation of an intermediate crystalline phase and promotes the formation of the desired perovskite phase, while excess DMSO content negatively impacts thin-film morphology.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Engineering, Chemical

Additive engineering for stable halide perovskite solar cells

Carlos Pereyra et al.

Journal of Energy Chemistry (2021)

Add to Collection

Review Chemistry, Physical

A review on perovskite solar cells (PSCs), materials and applications

N. Suresh Kumar et al.

Summary: Perovskite solar cells have garnered much attention in recent years due to their high power conversion efficiency, simple fabrication process, lightweight nature, and stability. Research has focused on the crystallinity, morphology, synthesis techniques, and potential commercialization feasibility of different layers in perovskite solar cells.

JOURNAL OF MATERIOMICS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells

Zahra Saki et al.

Summary: This article discusses the latest developments in perovskite solar cells (PSCs) and focuses on the challenges of achieving high-efficiency PSCs. The key factors in preparing perovskite thin films and large-scale production techniques are explored, with opportunities for commercialization highlighted.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Rui Wang et al.

Summary: Solar cells, specifically the metal halide perovskite PVs, have been recognized as essential and cost-effective clean energy technologies that can directly convert sunlight to electricity. While silicon-based PVs have dominated the market with mature fabrication techniques and good power conversion efficiency, the record PCE of perovskite PV cells has reached 25.5%, sparking interest in improving long-term stability and PCE. Future research is focused on enhancing the commercialization of perovskite PV devices in the next decade through strategies like effective fabrication techniques and the discovery of suitable interfacial materials.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Electron-deficient 4-nitrophthalonitrile passivated efficient perovskite solar cells with efficiency exceeding 22%†

Longhui Deng et al.

Summary: The study demonstrated that the use of 4-nitrophthalonitrile passivator enhanced the performance of perovskite solar cells and improved their environmental stability.

SUSTAINABLE ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Phosphorus-Containing Lewis Acid and Base Passivation Enabling Efficient and Moisture-Stable Perovskite Solar Cells

Zhi Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Extending Carrier Lifetimes in Lead Halide Perovskites with Alkali Metals by Passivating and Eliminating Halide Interstitial Defects

Lu Qiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Chemistry, Physical

Efficient Perovskite Solar Cells by Reducing Interface-Mediated Recombination: a Bulky Amine Approach

Lusheng Liang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Inkjet-Printed Micrometer-Thick Perovskite Solar Cells with Large Columnar Grains

Helge Eggers et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Scalable fabrication and coating methods for perovskite solar cells and solar modules

Nam-Gyu Park et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding Temperature-Dependent Charge Extraction and Trapping in Perovskite Solar Cells

Qian Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Shallow and Deep Trap State Passivation for Low-Temperature Processed Perovskite Solar Cells

Randi Azmi et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Review Chemistry, Physical

Passivation of defects in perovskite solar cell: From a chemistry point of view

Yameng Li et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

The Future of Perovskite Photovoltaics-Thermal Evaporation or Solution Processing?

Yana Vaynzof

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In situ transfer of CH3NH3PbI3 single crystals in mesoporous scaffolds for efficient perovskite solar cells

Yanjun Guan et al.

CHEMICAL SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Halide Perovskite Photovoltaics: Background, Status, and Future Prospects

Ajay Kumar Jena et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Multidisciplinary Sciences

A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells

Shaohang Wu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Bilateral alkylamine for suppressing charge recombination and improving stability in blade-coated perovskite solar cells

Wu-Qiang Wu et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Bandgap-tunable double-perovskite thin films by solution processing

Yuan Liu et al.

MATERIALS TODAY (2019)

Add to Collection

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

NbF5: A Novel α-Phase Stabilizer for FA-Based Perovskite Solar Cells with High Efficiency

Shihao Yuan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

On the Current-Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis

Dong-Ho Kong et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Stabilizing the Efficiency Beyond 20% with a Mixed Cation Perovskite Solar Cell Fabricated in Ambient Air under Controlled Humidity

Trilok Singh et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced solar cell stability by hygroscopic polymer passivation of metal halide perovskite thin film

Min Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Mojtaba Abdi-Jalebi et al.

NATURE (2018)

Add to Collection

Article Chemistry, Physical

Enhanced performance of perovskite solar cells via anti-solvent nonfullerene Lewis base IT-4F induced trap-passivation

Yaxiong Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

The Interplay of Contact Layers: How the Electron Transport Layer Influences Interfacial Recombination and Hole Extraction in Perovskite Solar Cells

Ilka M. Hermes et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Editorial Material Chemistry, Physical

Inverted Current-Voltage Hysteresis in Perovskite Solar Cells

Fan Wu et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Origin of Reversible Photoinduced Phase Separation in Hybrid Perovskites

Connor G. Bischak et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Ionic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells

Jordi Carrillo et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Light-Induced Phase Segregation in Halide-Perovskite Absorbers

Daniel J. Slotcavage et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding the rate-dependent J-V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field

W. Tress et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Trap States in Lead Iodide Perovskites

Xiaoxi Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Multidisciplinary Sciences

Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese

Jixian Xu et al.

NATURE COMMUNICATIONS (2015)

Add to Collection

Article Chemistry, Physical

Inorganic caesium lead iodide perovskite solar cells

Giles E. Eperon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Hysteresis-less mesoscopic CH3NH3Pbl3 perovskite hybrid solar cells by introduction of Li-treated TiO2 electrode

Jin Hyuck Heo et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites

Christian Wehrenfennig et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Improved Understanding of the Electronic and Energetic Landscapes of Perovskite Solar Cells: High Local Charge Carrier Mobility, Reduced Recombination, and Extremely Shallow Traps

Hikaru Oga et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Multidisciplinary Sciences

Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells

Yuchuan Shao et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

On the Differences between Dark and Light Ideality Factor in Polymer:Fullerene Solar Cells

Thomas Kirchartz et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

Add to Collection

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

Add to Collection

Article Multidisciplinary Sciences

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Michael M. Lee et al.

SCIENCE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.