☆ 4.8 Article

Modulating vacancies concentration ratio of cationic and anionic in WO3 for driving high performance magnesium ions storage

ENERGY STORAGE MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

High-rate performance magnesium batteries achieved by direct growth of honeycomb-like V2O5 electrodes with rich oxygen vacancies

Dongzheng Wu et al.

Summary: This study proposes a dual-functional design of V2O5 electrode with a rational honeycomb-like structure and rich oxygen vacancies to enhance the kinetics synergistically. The results demonstrate that the oxygen vacancies can enhance both the intrinsic electronic conductivity of V2O5 and the Mg2+ diffusion kinetics inside the cathode, resulting in good high-rate performance.

NANO RESEARCH (2023)

Add to Collection

Article Chemistry, Physical

Facilitating Mg2+ diffusion in high potential LixV2(PO4)3 cathode material with a co-insertion strategy for rechargeable Mg-ion batteries

Cuicui Li et al.

Summary: Rechargeable Mg-ion batteries face the challenge of lacking cathode materials with high operating potential and considerable capacity. This study proposes a co-insertion strategy and designs a polyanion cathode, Li3V2(PO4)(3), with high redox potential. The co-insertion of Li+ cations enhances the cation diffusion coefficients and improves the capacity. The Li3V2(PO4)(3) cathode exhibits high capacity and good capacity retention at room temperature.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

VS4 anchored on Ti3C2 MXene as a high-performance cathode material for magnesium ion battery

Jinglian Zhu et al.

Summary: Rechargeable magnesium batteries face challenges due to strong coulombic effects, but this study presents a high-performance system using hierarchical nano-micro hybrids to improve accessibility and reduce charge transfer resistance, achieving high discharge capacity, outstanding rate performance, and excellent cycling performance.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Environmental Sciences

N, S co-doped carbon quantum dots anchoring on copper-vacancy-rich Cu nanowires/Cu foam as the cathode in microbial fuel cells: Role of C-S-Cu active site

Danquan Lan et al.

Summary: In this study, N, S co-doped carbon quantum dots derived from orange peels were anchored on copper-vacancy-rich copper nanowires/copper foam to catalyze the ORR in MFCs. The interaction between the N, S-CQDs and copper-vacancy-rich copper nanowires/copper foam was found to be crucial for promoting electron transfer and creating active sites for ORR. The N, S-CQDs/Cu2O-Cu NWs demonstrated higher power density and superior stability compared to Pt/C, suggesting a potential alternative for efficient ORR electrocatalysts in microbial fuel cells.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Engineering, Environmental

Co0.85Se hollow polyhedrons entangled by carbon nanotubes as a high-performance cathode for magnesium secondary batteries

Dong Chen et al.

Summary: This study presents a new approach combining hollow structure and conductive framework in rechargeable magnesium battery cathodes, demonstrating high capacity and rate performance. The Co0.85Se hollow polyhedrons entangled by carbon nanotubes provide active nanodomains for highly reversible magnesium storage reactions, while also enhancing stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Cationic vanadium vacancy-enriched V2-xO5 on V2C MXene as superior bifunctional electrocatalysts for Li-O2 batteries

Haoyang Xu et al.

Summary: This study investigates the bifunctional catalytic activity of V2-xO5@V2C MXene on the oxygen electrode reaction in Li-O-2 batteries. The results demonstrate excellent performance of the V2-xO5@V2C MXene-based Li-O-2 battery, with high energy efficiency and over 500 cycles of excellent cycling performance. Density functional theory calculations confirm that cationic vanadium vacancies can enhance the electrocatalytic activity of transition metal oxides by providing abundant active sites and optimizing reactant adsorption.

SCIENCE CHINA-MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Bimetallic sulfide NiCo2S4 yolk-shell nanospheres as high-performance cathode materials for rechargeable magnesium batteries

Yiming Ma et al.

Summary: Constructing bimetallic sulfides with ideal structures can effectively improve the cycling stability and energy storage performance of rechargeable Mg batteries. The yolk-shell structured bimetallic sulfide NiCo2S4 synthesized in this study demonstrates remarkable Mg-storage performance, with excellent reversible capacity, high rate capability, and good capacity retention. The investigation of the mechanism reveals the significance of the bimetallic synergistic effect in the Mg-storage process.

NANOSCALE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Structure Design of Long-Life Spinel-Oxide Cathode Materials for Magnesium Rechargeable Batteries

Kohei Shimokawa et al.

Summary: This study demonstrates a design concept for high-performance cathode materials by selecting an element to destabilize the rocksalt-type structure and utilizing the defect-spinel-type structure, leading to excellent cycle performance of magnesium rechargeable batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

MOF derived TiO2 with reversible magnesium pseudocapacitance for ultralong-life Mg metal batteries

Xinyin Cai et al.

Summary: Magnesium metal batteries with TiO2 cathodes derived from Ti-MOF exhibit high capacity retention and long cycling life, attributed to the high pseudocapacitive performance and ion migration facilitated by the carbon skeleton in the TiO2 cathode.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Analytical

Glucose-assisted synthesis of hierarchical NiO-ZnO heterostructure with enhanced glycol gas sensing performance

Chen Su et al.

Summary: A novel flower-like hierarchical NiO-ZnO heterostructure was synthesized using a one-step hydrothermal method with the assistance of glucose and further calcination treatment. Gas sensors based on this heterojunction showed excellent response and stability for glycol detection at relatively low operating temperature. This work demonstrates a great potential for efficient glycol gas detection by directly synthesizing G-NiO-ZnO heterojunction in a one-step approach.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Molecular dynamic study for concentration-dependent volume relaxation of vacancy

Zhen Cui et al.

Summary: This study uses large-scale molecular dynamics simulations to investigate concentration-dependent vacancy volume relaxation in Al, Cu, and Au, finding that the vacancy volume relaxation factor remains constant at low to mid-concentration levels and collapses at high concentrations, leading to the formation of massive dislocations. The results are consistent with existing data and an empirical equation is developed to describe the relationship between vacancy volume relaxation factor and vacancy concentration. Additionally, hydrostatic stress calculations are performed and the relationship between vacancy volume relaxation and diffusion-induced strain, particularly in the context of electromigration, is discussed.

MICROELECTRONICS RELIABILITY (2021)

Add to Collection

Article Chemistry, Physical

Reversible aluminum ion storage mechanism in Ti-deficient rutile titanium dioxide anode for aqueous aluminum-ion batteries

Xibing Wu et al.

Summary: A new Ti-deficient rutile titanium dioxide material was achieved via univalent ion doping and evaluated as an anode for aqueous aluminum-ion batteries, showing high reversible capacity and stability, indicating the potential for improving electrode materials for such batteries through cationic defect engineering.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A 3D Graphene/WO3 nanowire composite with enhanced capture and polysulfides conversion catalysis for high-performance Li-S batteries

Lubin Ni et al.

Summary: The lithium-sulfur batteries are considered promising for next generation energy storage due to their high theoretical energy density. However, commercialization faces challenges such as non-conductive cathode material and slow reaction kinetics. A hierarchical reduced graphene-tungsten oxide structure was designed to improve battery performance, catalyzing polysulfide conversion.

CARBON (2021)

Add to Collection

Article Engineering, Environmental

Simultaneous modified Na2.9V1.9Zr0.1(PO4)3/C@rGO as a superior high rate and ultralong lifespan cathode for symmetric sodium ion batteries

Yanjun Chen et al.

Summary: The dual strategy of optimizing the crystal structure and conductive characteristics of NVP by substituting Zr4+ and creating vacancies, along with the coated carbon layer and rGO, results in outstanding performance in sodium ion batteries. The Zr0.1-NVP/C@rGO demonstrates excellent rate capability and long cyclic stability, offering a potential strategy for other high-quality materials in SIBs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Achieving Efficient Magnesium-Sulfur Battery Chemistry via Polysulfide Mediation

Qingli Zou et al.

Summary: Magnesium-sulfur batteries offer higher theoretical volumetric energy density and lower cost compared to lithium-sulfur batteries, but suffer from poor cycle life and low energy efficiency. By increasing polysulfide solubility with high-donor-number solvents like dimethyl sulfoxide (DMSO), the discharge capacity and sulfur overpotential can be improved, leading to higher performance and reversible cycling.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Exposed crystal facets of WO3 nanosheets by phase control on NO2-sensing performance

Wanqing Song et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Engineering, Environmental

Reduction kinetics of hercynite redox materials for solar thermochemical water splitting

Ibraheam A. Al-Shankiti et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Impacts on carbon dioxide electroreduction of cadmium sulfides via continuous surface sulfur vacancy engineering

Ling Cheng et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Crystal regulation towards rechargeable magnesium battery cathode materials

Shuangshuang Tan et al.

MATERIALS HORIZONS (2020)

Add to Collection

Article Electrochemistry

Preparation of oxygen-deficient WO3-x nanosheets and their characterization as anode materials for high-performance Li-ion batteries

Yihui Li et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Li2O2 Decomposition in Rechargeable Li-O2 Battery by Incorporating WO3 Nanowire Array Photocatalyst

Yaya Feng et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The Kirkendall Effect for Engineering Oxygen Vacancy of Hollow Co3O4 Nanoparticles toward High-Performance Portable Zinc-Air Batteries

Dongxiao Ji et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Deficiencies Engineering in Li-Rich Layered Oxide Li1.098Mn0.533Ni0.113Co0.138O2 for High-Stability Cathode

Pengfei Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Electrochemistry

One-step hydrothermal synthesis of 2D WO3 nanoplates@ graphene nanocomposite with superior anode performance for lithium ion battery

Wei Dang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Nonlithium Metal-Sulfur Batteries: Steps Toward a Leap

Xiaodong Hong et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Tungsten oxide nanorod architectures as 3D anodes in binder-free lithium-ion batteries

Tim Herdt et al.

NANOSCALE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Layered Double Hydroxide Nanosheets with Multiple Vacancies Obtained by Dry Exfoliation as Highly Efficient Oxygen Evolution Electrocatalysts

Yanyong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Physical

Anisotropic Effects of Oxygen Vacancies on Electrochromic Properties and Conductivity of γ-Monoclinic WO3

Matteo Gerosa et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Chemistry, Physical

MnO nanoparticles with cationic vacancies and discrepant crystallinity dispersed into porous carbon for Li-ion capacitors

Chaofeng Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Engineering, Environmental

Hierarchically structured reduced graphene oxide/WO3 frameworks for an application into lithium ion battery anodes

Sul Ki Park et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance silicon-based multicomponent battery anodes produced via synergistic coupling of multifunctional coating layers

Jung-In Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.