☆ 4.7 Article

Upper Limb Joint Angle Estimation Using Wearable IMUs and Personalized Calibration Algorithm

MATHEMATICS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Analytical

Prediction of Lower Extremity Multi-Joint Angles during Overground Walking by Using a Single IMU with a Low Frequency Based on an LSTM Recurrent Neural Network

Joohwan Sung et al.

Summary: This study proposes a method for multi-joint angle estimation using a low-frequency IMU sensor and LSTM recurrent neural network, which can be conveniently used in daily life. The experimental results show relatively high estimation accuracy, similar to previous studies using high-frequency IMU sensors.

SENSORS (2022)

Add to Collection

Article Chemistry, Analytical

Reliability and Validity of an Inertial Measurement System to Quantify Lower Extremity Joint Angle in Functional Movements

Zhenyu Shuai et al.

Summary: The purpose of this research was to assess the validity and reliability of the Perception Neuron motion capture system in clinically relevant lower limb functional tasks. The results showed that the system had good waveform similarity and acceptable differences in discrete parameters, indicating its potential for evaluating lower extremity joint kinematics in functional motions.

SENSORS (2022)

Add to Collection

Article Robotics

Calib-Net: Calibrating the Low-Cost IMU via Deep Convolutional Neural Network

Ruihao Li et al.

Summary: This paper introduces Calib-Net, a method that achieves accurate calibration of low-cost IMUs using a simple deep convolutional neural network. The experimental results show that Calib-Net outperforms other methods in calibration performance, and the estimated orientation is comparable to visual inertial odometry systems.

FRONTIERS IN ROBOTICS AND AI (2022)

Add to Collection

Article Chemistry, Analytical

Body-Worn IMU-Based Human Hip and Knee Kinematics Estimation during Treadmill Walking

Timothy McGrath et al.

Summary: This study explores the unobservability conditions in human walking and proposes a new method for estimating human hip angles during walking. The proposed method is evaluated and compared with an optical motion capture system, showing similar accuracy to state-of-the-art self-calibrating IMU methods for knee and hip flexion/extension angles, but larger errors for hip internal/external rotation angles. The study also discusses the sources of error, such as IMU heading drift and non-hinge kinematics of the hip, and their impact on the estimation accuracy.

SENSORS (2022)

Add to Collection

Article Computer Science, Information Systems

Real-Time Human Motion Capture Based on Wearable Inertial Sensor Networks

Jie Li et al.

Summary: This article introduces a new wearable inertial motion capture technology that estimates human posture in 3-D space through sensor data fusion. By using methods such as extended Kalman filter and zero-velocity update, the proposed algorithm outperforms existing models in both attitude and position estimation, making it suitable for various experimental scenarios.

IEEE INTERNET OF THINGS JOURNAL (2022)

Add to Collection

Review Computer Science, Information Systems

Motion Tracking Algorithms Based on Wearable Inertial Sensor: A Focus on Shoulder

Umile Giuseppe Longo et al.

Summary: Accurate assessment of shoulder range of motion is important for understanding specific conditions and rehabilitation. Sensor fusion algorithms have been found to be reliable and efficient for shoulder motion tracking.

ELECTRONICS (2022)

Add to Collection

Review Biochemistry & Molecular Biology

The Complement System, Aging, and Aging-Related Diseases

Runzi Zheng et al.

Summary: The complement system is a part of the immune system and plays a role in defense against pathogens and immunomodulation. It is involved in aging, inflammatory processes, metabolism, apoptosis, and aging-related diseases.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Article Chemistry, Analytical

Development of Joint Activity Angle Measurement and Cloud Data Storage System

Chiu-Ching Tuan et al.

Summary: In this study, a motion sensing system (ROMSS) was developed to simulate the function of the elbow joint. The ROMSS showed low errors and provided timely patient information. A cloud database was established and a mobile app was developed for real-time data tracking, enabling the assessment of care quality.

SENSORS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Phone-Based Motion Capture and Analysis: Importance of Operating Envelope Definition and Application to Clinical Use

Ashley Chey Vincent et al.

Summary: A Mobile Motion Capture system (MO(2)CA) using a smart-phone and colored markers was developed and demonstrated to effectively detect and discriminate various human movements, encompassing the whole body, body region, and extremity and digit movements. This method provides a simple and reliable approach for quantitating movement and has the potential for future clinical application studies.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Joint Angle Estimation Using Accelerometer Arrays and Model-Based Filtering

Cole Woods et al.

Summary: Measurement of joint angles is important for the control of robotic systems and monitoring human gait. This study proposes a dynamic model and three methods to estimate joint angles using an array of accelerometers and the equivalence of acceleration at the joint. Simulations and experiments confirm that model-based filtering methods perform better than the analytical approach, and placing accelerometers at the ends of the links minimizes estimation error.

IEEE SENSORS JOURNAL (2022)

Add to Collection

Article Chemistry, Analytical

Motion Sensors for Knee Angle Recognition in Muscle Rehabilitation Solutions

Tiago Franco et al.

Summary: Aging leads to a progressive loss of functional capacity, but the NanoStim project aims to address this issue by developing a self-assisted electrostimulation system for home treatment. This wearable system uses low-cost hardware and optimization filters to recognize knee angles and measure movement accurately.

SENSORS (2022)

Add to Collection

Article Sport Sciences

3D trunk orientation measured using inertial measurement units during anatomical and dynamic sports motions

Niels P. Brouwer et al.

Summary: This study found that using IMUs to measure three-dimensional trunk orientation during dynamic sports motions and isolated anatomical trunk motions had good accuracy and high similarity to optical motion capture methods. IMUs show promise as an alternative for field-based measurement of trunk orientation in dynamic sports and anatomical motions.

SCANDINAVIAN JOURNAL OF MEDICINE & SCIENCE IN SPORTS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Wearable IMU-Based System for Real-Time Monitoring of Lower-Limb Joints

Sumit Majumder et al.

Summary: Advancements in micro-electromechanical systems technology have led to the development of miniature, low-power, and high-performance inertial motion sensors that are widely used in smart gadgets. These sensors have the potential to enable efficient home-based health monitoring, especially in the continuous monitoring of lower-limb joints on wearable platforms for tele-rehabilitation of patients with motor impairments. The proposed sensor fusion algorithm successfully estimates lower-limb joint angles in real-time, demonstrating robustness against external acceleration and magnetic disturbances.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Chemistry, Analytical

Custom IMU-Based Wearable System for Robust 2.4 GHz Wireless Human Body Parts Orientation Tracking and 3D Movement Visualization on an Avatar

Javier Gonzalez-Alonso et al.

Summary: Recent studies show IMU-based systems are suitable for human motion analysis; while commercial solutions are expensive, entry-level solutions have limitations. Custom solutions have more limitations but can help popularize the technology's use.

SENSORS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Deep ConvLSTM Network with Dataset Resampling for Upper Body Activity Recognition Using Minimal Number of IMU Sensors

Xiang Yang Lim et al.

Summary: This study focuses on the significance of human activity recognition and proposes two approaches to address the issue of imbalanced sensor data: resampling and multiclass focal loss. These methods can effectively improve model performance while handling the challenge of imbalanced data distribution.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Chemistry, Analytical

Inertial Measurement of Head Tilt in Rodents: Principles and Applications to Vestibular Research

Romain Fayat et al.

Summary: Inertial sensors are increasingly being used in rodent research to estimate head orientation and tilt, with the potential for accurate tilt estimates during movement when combined with sensor calibration and appropriate filter and parameter choices. Additionally, these sensors can be applied in studying vestibular functions and behavioral analysis in rodents.

SENSORS (2021)

Add to Collection

Review Chemistry, Analytical

Review of Wearable Devices and Data Collection Considerations for Connected Health

Vini Vijayan et al.

Summary: Wearable sensor technology is increasingly utilized in a variety of applications, including monitoring patient health, assisting with disease diagnosis, and improving patient outcomes. These sensors can detect and quantify specific movements, offering advantages over traditional medical assessments that may not accurately reflect a patient's functional abilities.

SENSORS (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Kalman Filter: Historical Overview and Review of Its Use in Robotics 60 Years after Its Creation

Claudio Urrea et al.

Summary: The Kalman filter has attracted increased attention from researchers due to its widespread application in the robotics field. This work reviews modifications made to the algorithm in recent years, analyzing and comparing the characteristics of each. Sixty years after its creation, the filter continues to be widely used in autonomous navigation, robot control, and other activities, not limited to robotics.

JOURNAL OF SENSORS (2021)

Add to Collection

Article Engineering, Aerospace

Unscented Kalman Filter-Aided Long Short-Term Memory Approach for Wind Nowcasting

Junghyun Kim et al.

Summary: This study aims to compare the performance of different machine learning models for wind prediction, select the most suitable model, combine it with an unscented Kalman filter to improve accuracy, and conduct Monte Carlo simulations to quantify uncertainties in the modeling process.

AEROSPACE (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Two-Axis Accelerometer Calibration and Nonlinear Correction Using Neural Networks: Design, Optimization, and Experimental Evaluation

Mario A. Soriano et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Simple, Low-Cost and Efficient Gait Analyzer for Wearable Healthcare Applications

Sumit Majumder et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Chemistry, Analytical

Assessment of Shoulder Range of Motion Using a Wireless Inertial Motion Capture DeviceA Validation Study

Michael Rigoni et al.

SENSORS (2019)

Add to Collection

Article Chemistry, Analytical

Quaternion-Based Robust Attitude Estimation Using an Adaptive Unscented Kalman Filter

Antonio C. B. Chiella et al.

SENSORS (2019)

Add to Collection

Article Automation & Control Systems

Generalized Linear Quaternion Complementary Filter for Attitude Estimation From Multisensor Observations: An Optimization Approach

Jin Wu et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2019)

Add to Collection

Review Chemistry, Analytical

Monitoring Methods of Human Body Joints: State-of-the-Art and Research Challenges

Abu Ilius Faisal et al.

SENSORS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Finite element analysis of the wrist in stroke patients: the effects of hand grip

Muhammad Hanif Ramlee et al.

MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2018)

Add to Collection

Article Chemistry, Analytical

Inertial Measurement Units for Clinical Movement Analysis: Reliability and Concurrent Validity

Mohammad Al-Amri et al.

SENSORS (2018)

Add to Collection

Article Chemistry, Analytical

Quaternion-Based Local Frame Alignment between an Inertial Measurement Unit and a Motion Capture System

Jung Keun Lee et al.

SENSORS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Pedestrian Dead Reckoning Based on Frequency Self-Synchronization and Body Kinematics

Michele Basso et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection

Article Engineering, Electrical & Electronic

A Multi-Position Calibration Method for Consumer-Grade Accelerometers, Gyroscopes, and Magnetometers to Field Conditions

Olli Sarkka et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection

Article Computer Science, Artificial Intelligence

PSO Aided Adaptive Complementary Filter for Attitude Estimation

Shashi Poddar et al.

JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS (2017)

Add to Collection

Review Biophysics

FUNCTION AND BIOMECHANICS OF UPPER LIMB IN POST-STROKE PATIENTS - A SYSTEMATIC REVIEW

Muhammad Hanif Ramlee et al.

JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY (2017)

Add to Collection

Review Chemistry, Analytical

Smart Homes for Elderly Healthcare-Recent Advances and Research Challenges

Sumit Majumder et al.

SENSORS (2017)

Add to Collection

Review Chemistry, Analytical

Wearable Sensors for Remote Health Monitoring

Sumit Majumder et al.

SENSORS (2017)

Add to Collection

Article Engineering, Aerospace

Multiple Model Adaptive Complementary Filter for Attitude Estimation

Rahul Kottath et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Aerospace

A new Multi-position calibration method for gyroscope's drift coefficients on centrifuge

Wang Shi-ming et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Aerospace

Window based Multiple Model Adaptive Estimation for Navigational Framework

Rahul Kottath et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Analytical

Quaternion-Based Unscented Kalman Filter for Accurate Indoor Heading Estimation Using Wearable Multi-Sensor System

Xuebing Yuan et al.

SENSORS (2015)

Add to Collection

Article Engineering, Aerospace

An improved multi-position calibration method for low cost micro-electro mechanical systems inertial measurement units

Zhijian Ding et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2015)

Add to Collection

Article Automation & Control Systems

Nonlinear complementary filters on the special linear group

Robert Mahony et al.

INTERNATIONAL JOURNAL OF CONTROL (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.