☆ 4.6 Article

A new environmentally friendly non-destructive activation process of electroless nickel plating on alumina ceramics

MATERIALS TODAY COMMUNICATIONS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

Saqib Rashid et al.

Summary: The research investigates the relationship between the structural and functional properties of TiCu(Ag) thin films, revealing their excellent biocompatibility and antibacterial properties, making them promising for use in tissue engineering applications.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Design, fabrication, microstructure, and properties of highly porous alumina whisker foam ceramic

Juntao Wu et al.

Summary: A new type of highly porous ceramic was successfully fabricated from alpha-Al2O3 whiskers and nano-sized Al2O3 particles, exhibiting low density, high porosity, high compressive strength, and low thermal conductivity. The synthesized ceramic shows potential applications in high-temperature gas filtration and thermal insulation materials.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Demonstration of durable electronic textiles via mechanically assisted highly adhesive printing of carbon nanotube-polymer composites on commercial fabrics

Kwangjin Choi et al.

Summary: This study demonstrates the highly adhesive and uniform printing of carbon nanotube-polymer composites (CPCs) on commercial fabrics using a mechanically assisted printing (MAP) technique. By controlling the mixture ratio and applying various patterning methods, the printability and conductivity of the composites can be optimized to fabricate durable flexible electronic circuits.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Add to Collection

Article Thermodynamics

Thermal design optimization of electronic circuit board layout with transient heating chips by using Bayesian optimization and thermal network model

Daiki Otaki et al.

Summary: This paper presents a method that combines Bayesian optimization and a lumped-capacitance thermal network model to accelerate the thermal design optimization of electronic circuit board layouts. The method successfully finds the ideal layout while significantly reducing the computational time.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Iodide-induced galvanic replacement of nickel film on copper as activator for electroless nickel-phosphorus plating

Qiuping Zhao et al.

Summary: In this study, a nickel film was deposited on copper through an iodide-assisted galvanic replacement method. It was found that increasing the iodide concentration was beneficial for the galvanic replacement rate between copper and nickel ions. The resulting nickel film showed good activation ability for electroless nickel-phosphorus plating.

MATERIALS LETTERS (2022)

Add to Collection

Review Engineering, Manufacturing

Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives

S. M. Olhero et al.

Summary: This review presents the latest research progress on the manufacturing and performance characteristics of functional ceramics in additive manufacturing processes, as well as a summary of the developments and future prospects in the fabrication of these ceramics over the past two decades.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Chemistry, Physical

Electroless nickel plating on alumina ceramic activated by metallic nickel as electrocatalyst for oxygen evolution reaction

Pingping Zhang et al.

Summary: A cost-effective metallic nickel activation process is proposed for porous alumina ceramic, leading to excellent electrocatalytic oxygen evolution performance. This is attributed to its amorphous structure and the presence of oxides and hydroxides on its surface, providing catalytic active sites for oxygen evolution reaction. Thus, the simple metallic nickel activation process shows promise for electroless nickel plating on porous alumina ceramic.

CATALYSIS COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Ceramics

Electroless-plating of Ag nanoparticles on Al2O3 and graphene Nano sheets (GNs) for improved wettability and properties of Al-Al2O3/GNs nanocomposites

A. M. Sadoun et al.

Summary: The use of electroplating technology improved wettability between composite components, resulting in dense samples with high hardness; The silver plating enhanced the surface characteristics of Al2O3 and GNs nanoparticles; Compared to available techniques and results in the literature, a hybrid nano-composite with 1.85 times larger hardness than available Al-GNs nanocomposites and 1.75 times larger hardness than available Al-Al2O3/GNs nanocomposites was achieved.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Properties of alumina coatings prepared on silica-based ceramic substrate by plasma spraying and sol-gel dipping methods

Zhiping Pan et al.

Summary: Silica-based ceramic cores are used in manufacturing turbine blades, but reactions with active metals in superalloys can reduce their quality. Alumina coatings prepared using plasma spraying and sol-gel dipping methods were compared, with the former showing peeling at high temperatures and the latter demonstrating improved performance. The alumina coating effectively prevented interfacial reactions between the superalloy and the silica-based substrate during casting.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Cracking in the translucent alumina ceramic during flame thermal shock

Yuqiao Li et al.

Summary: This paper introduces a new experimental method for real-time display of thermal shock cracking using oxygen-acetylene flame and high-speed imaging of translucent ceramic. The study investigates crack propagation speed, the influence of sample size and flame heat flux on crack propagation, and compares crack propagation under cold and hot shock conditions, further improving the understanding of the thermal shock damage mechanism of ceramic materials.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Multidisciplinary

Transparent poly(ether sulfone) nanocomposite film with low thermal expansion coefficient for flexible display substrates

Nhat Tri Vo et al.

Summary: Optically transparent PES nanocomposite films with low coefficients of thermal expansion were synthesized by incorporating AlOOH nanowires as fillers, leading to significant reduction in CTE, while maintaining high optical transmittance and thermal stability.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Study on the mechanical failure of the cellulosic insulation of continuously transposed conductors in power transformers under the influence of short circuits and thermal ageing

C. Oria et al.

Summary: The study investigated the ageing effects on dielectric paper in power transformers, analyzing the breakage of conductors, mechanical characteristics and strains in the paper under different ageing states. The modified Norris failure criterion was used to predict the susceptible regions for failure in the dielectric paper, showing good agreement with experimental results.

ENGINEERING FAILURE ANALYSIS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of La2O3 on the corrosion resistance of alumina ceramic

Tingting Wu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Materials Science, Ceramics

Fabrication, microstructure and high-temperature plastic deformation of three-phase Al2O3/Er3Al5O12/ZrO2 sintered ceramics

F. A. Huaman-Mamani et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

High-performance flexible electromagnetic shielding polyimide fabric prepared by nickel-tungsten-phosphorus electroless plating

Xiaodong Ding et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

A new process for pre-treatment of electroless copper plating on the surface of mica powders with ultrasonic and nano-nickel

Weinan Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Coatings & Films

Electrical insulation performance of aluminum oxide layers on metallic substrates - HiPIMS compared to RF-MS

Frank Schmaljohann et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Preparation of Co-plated WC powders by a non-precious-Co-activation triggered electroless plating strategy

Jing Tong et al.

ADVANCED POWDER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Ceramics

HF/HCl acid resistance mechanisms of alumina ceramics in the Al2O3-MgO-CaO-SiO2-Y2O3 system

Tingting Wu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Engineering, Multidisciplinary

A facile process to manufacture high performance copper layer on ceramic material via biomimetic modification and electroless plating

Yan Wang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Electroless copper deposition: A critical review

Swatilekha Ghosh

THIN SOLID FILMS (2019)

Add to Collection

Review Engineering, Multidisciplinary

Graphene-based microwave absorbing composites: A review and prospective

Fanbin Meng et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Engineering, Multidisciplinary

Graphene as biomedical sensing element: State of art review and potential engineering applications

Ranvijay Kumar et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Life cycle assessment and techno-economic evaluation of alternatives for the treatment of wastewater in a chrome-plating industry

R. Rodriguez et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Materials Science, Coatings & Films

Electrochemical noise analysis to examine the corrosion behavior of Ni-P deposit on AM60B alloy plated by Zr pretreatment

Z. Rajabalizadeh et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Ceramics

Green ceramic pigment based on chromium recovered from a plating waste

Griselda X. Gayo et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Ceramics

Creep study on alumina and alumina/SWCNT nanocomposites

Miguel Castillo-Rodriguez et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Thermodynamics

Heat transfer enhancement by flexible printed circuit board's deformation

C. H. Lim et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Materials Science, Coatings & Films

Electroless Ni-B coating onto TiH2 powder: An approach for a simplified surface preparation

M. Romero-Romero et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Coatings & Films

Duplex Ni-Zn-Cu-P/Ni-P electroless coating on magnesium alloy via maleic acid pretreatment

M. Heshmati et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Application of electroless Ni-P coating on magnesium alloy via CrO3/HF free titanate pretreatment

Z. Rajabalizadeh et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Disproportionation of hypophosphite and phosphite

Dapeng Liu et al.

DALTON TRANSACTIONS (2017)

Add to Collection

Article Environmental Sciences

Nano-alumina powders/ceramics derived from aluminum foil waste at low temperature for various industrial applications

Ahmed A. M. El-Amir et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Functional properties of ceramic-Ag nanocomposite coatings produced by magnetron sputtering

S. Calderon Velasco et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Palladium catalyst synthesis through sol-gel processing for electroless nickel deposition on glass

Anna V. Kobets et al.

THIN SOLID FILMS (2016)

Add to Collection

Article Materials Science, Ceramics

Comparison of the high-temperature corrosion of aluminium nitride, alumina, magnesia and zirconia ceramics by coal ashes

Gert Himpel et al.

CERAMICS INTERNATIONAL (2015)

Add to Collection

Article Materials Science, Ceramics

Effect of the volume fraction of SiC on the microstructure and creep behavior of hot pressed Al2O3/SiC composites

M. Parchoviansky et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Polymer Science

Poly(ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen - An environment friendly approach for disposal of environmentally hazardous material

Rabindra K. Padhan et al.

POLYMER DEGRADATION AND STABILITY (2013)

Add to Collection

Article Materials Science, Ceramics

The preparation of Cu-coated Al2O3 composite powders by electroless plating

Hui Wang et al.

CERAMICS INTERNATIONAL (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Study of a pre-treatment process for electroless copper plating on ceramics

Hongfang Ma et al.

THIN SOLID FILMS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.