4.6 Article

Microstructures and properties of nanocrystalline W-based alloys produced by resistance sintering under ultrahigh pressure

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Uncovering the softening mechanism and exploring the strengthening strategies in extremely fine nanograined metals: A molecular dynamics study

H. R. Peng et al.

Summary: In this study, molecular dynamics simulations were used to investigate the softening mechanism and explore strengthening strategies in extremely fine nanograined metals. The softening of nanocrystalline metals was attributed to atomic sliding in the grain boundary layer, while strengthening could be achieved by the formation of solid solution or grain boundary segregation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Physics, Fluids & Plasmas

Influence of neon seeding on the deuterium retention and surface modification of ITER-like forged tungsten

Yue Yuan et al.

Summary: The effect of neon seeding on deuterium retention and surface modification of ITER-like forged tungsten was investigated in a plasma device. Neon seeding led to cracking and erosion of blister caps, reduction of small blisters, and increased total deuterium retention. The results suggest that neon seeding influences surface topography, deuterium diffusion and trapping, creating new deuterium-traps in the material.

NUCLEAR FUSION (2021)

Article Physics, Fluids & Plasmas

Suppression of edge localized modes with real-time boron injection using the tungsten divertor in EAST

Z. Sun et al.

Summary: Continuous boron powder injection in the Experimental Advanced Superconducting Tokamak enables robust suppression of edge-localized modes, demonstrating quasi-steady ELM suppression discharges with modest energy confinement improvement over a wide range of conditions. This ELM suppression is observed above a threshold edge B intensity and ceases within 0.5 seconds of termination of the B injection.

NUCLEAR FUSION (2021)

Article Instruments & Instrumentation

Retention/reflection of hydrogen and surface evolution during cumulative bombardment of low-energy hydrogen on tungsten: A molecular dynamics study

Baoqin Fu et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2020)

Review Materials Science, Multidisciplinary

A review of surface damage/microstructures and their effects on hydrogen/helium retention in tungsten

Yong-Gang Li et al.

TUNGSTEN (2020)

Article Materials Science, Multidisciplinary

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Yu-Fen Zhou et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Article Physics, Fluids & Plasmas

On the origin of 'fuzz' formation in plasma-facing materials

Dwaipayan Dasgupta et al.

NUCLEAR FUSION (2019)

Article Materials Science, Multidisciplinary

An investigation of the microstructure and ductility of annealed cold-rolled tungsten

Chai Ren et al.

ACTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Fabrication and characterization of nanocrystalline ODS-W via a dissolution-precipitation process

R. Wang et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)

Article Materials Science, Multidisciplinary

Nanochannel structures in W enhance radiation tolerance

Wenjing Qin et al.

ACTA MATERIALIA (2018)

Article Nuclear Science & Technology

Effects of tantalum concentration on the microstructures and mechanical properties of tungsten-tantalum alloys

Zheng Wang et al.

FUSION ENGINEERING AND DESIGN (2017)

Article Materials Science, Multidisciplinary

Deuterium implantation into Y2O3-doped and pure tungsten: Deuterium retention and blistering behavior

M. Zhao et al.

JOURNAL OF NUCLEAR MATERIALS (2017)

Article Multidisciplinary Sciences

Nanostructured laminar tungsten alloy with improved ductility by surface mechanical attrition treatment

Hong-Yan Guo et al.

SCIENTIFIC REPORTS (2017)

Article Materials Science, Multidisciplinary

Preparation and microstructure characterization of W-0.1 wt.%TiC alloy via chemical method

Shaoting Lang et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

Article Materials Science, Multidisciplinary

Effect of hot rolling and annealing on the mechanical properties and thermal conductivity of W-0.5 wt.% TaC alloys

S. Miao et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

Article Nanoscience & Nanotechnology

Toughness and microstructure of tungsten fibre net-reinforced tungsten composite produced by spark plasma sintering

L. H. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Materials Science, Multidisciplinary

Solute-Derived Thermal Stabilization of Nano-sized Grains in Melt-Spun Aluminum

A. H. Baker et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)

Article Materials Science, Multidisciplinary

Achieving high strength/ductility in bulk W-Zr-Y2O3 alloy plate with hybrid microstructure

Z. M. Xie et al.

MATERIALS & DESIGN (2016)

Article Nuclear Science & Technology

Manufacturing and testing of self-passivating tungsten alloys of different composition

A. Calvo et al.

NUCLEAR MATERIALS AND ENERGY (2016)

Article Nuclear Science & Technology

Consolidation of W-Ta composites: Hot isostatic pressing and spark and pulse plasma sintering

M. Dias et al.

FUSION ENGINEERING AND DESIGN (2015)

Article Nuclear Science & Technology

Characterization of W/Fe functionally graded materials manufactured by resistance sintering under ultra-high pressure

Dandan Qu et al.

FUSION ENGINEERING AND DESIGN (2015)

Article Materials Science, Multidisciplinary

Hydrogen diffusion and trapping in nanocrystalline tungsten

P. M. Piaggi et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of the formation, growth and bursting of bubbles in tungsten exposed to high fluxes of low energy deuterium

Shengguang Liu et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Characterization of ODS-tungsten microwave-sintered from sol-gel prepared nano-powders

R. Liu et al.

JOURNAL OF NUCLEAR MATERIALS (2014)

Article Materials Science, Multidisciplinary

Spark plasma sintering and mechanical properties of zirconium micro-alloyed tungsten

Z. M. Xie et al.

JOURNAL OF NUCLEAR MATERIALS (2014)

Article Nanoscience & Nanotechnology

Tensile and impact properties of microwave sintered tungsten heavy alloys

G. Prabhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of deuterium trapping and bubble formation in tungsten

Xue Yang et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

Article Multidisciplinary Sciences

Design of Stable Nanocrystalline Alloys

Tongjai Chookajorn et al.

SCIENCE (2012)

Article Materials Science, Multidisciplinary

Deformation Mechanisms in Nanocrystalline Materials

Farghalli A. Mohamed et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)

Editorial Material Multidisciplinary Sciences

Controlling Radiation Damage

Graeme Ackland

SCIENCE (2010)

Article Materials Science, Multidisciplinary

Vacancy trapping mechanism for hydrogen bubble formation in metal

Yue-Lin Liu et al.

PHYSICAL REVIEW B (2009)

Article Materials Science, Multidisciplinary

Nanomechanics of Hall-Petch relationship in nanocrystalline materials

C. S. Pande et al.

PROGRESS IN MATERIALS SCIENCE (2009)

Article Materials Science, Multidisciplinary

Correlation of thermodynamics and grain growth kinetics in nanocrystalline metals

Xiaoyan Song et al.

ACTA MATERIALIA (2006)

Article Nanoscience & Nanotechnology

Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials

YT Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Article Materials Science, Multidisciplinary

Factors influencing microstructural development in equal-channel angular pressing

M Furukawa et al.

METALS AND MATERIALS INTERNATIONAL (2003)