☆ 4.7 Article

Mechanical properties of innovative prefabricated friction pendulum bearing with concrete-filled steel tube system

JOURNAL OF BUILDING ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Review Construction & Building Technology

Strength behavior of circular concrete-filled steel tube stub columns under axial compression: A review

Xiuling Wang et al.

Summary: This paper reviews the compressive strength of circular concrete-filled steel tube stub columns (CFST-SCs) and evaluates the applicability and reliability of international design specifications for predicting compressive strength. The study reveals that all specifications yield conservative predictions on the strength capacity of CFST-SCs. Additionally, the paper provides recommendations for preventing buckling failure and assesses the applicability of existing guidelines for evaluating axial strength of CFST-SCs.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Optimization design of triple friction pendulums for Base-isolated High-rise buildings based on bearing displacement and collapse fragility

Yanqing Xu et al.

Summary: This paper proposes a method based on multi-objective optimization to determine the parameters of TFPB, in order to utilize all sliding stages of TFPB for high-rise buildings and ensure the safety of the building.

STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Experimental and numerical behavior of eccentrically loaded square concrete-filled steel tubular long columns made of high-strength steel and concrete

Guo-Chang Li et al.

Summary: This study evaluates the fundamental behavior of high-strength concrete-filled high-strength square steel tubular long columns under eccentric compression through experimental tests and numerical investigations. Equations are proposed to predict the peak-loads of the columns, and comparisons are made with various design codes to assess their feasibility. The research findings provide insights into the mechanical characteristics and failure mechanisms of high-strength materials in CFST columns, offering improved prediction models for practical applications.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Lateral Impact Resilient double concave Friction Pendulum (LIR-DCFP) bearing: Formulation, parametric study of the slider and three-dimensional numerical example

Gaspar Auad et al.

Summary: Seismic isolation using frictional isolators is a common method, but internal impact between components may lead to failure. This paper introduces a new friction device, LIR-DCFP bearing, which enhances dynamic behavior and reduces structural forces. Comparative analysis shows significant reductions in base shear, inter-story drifts, and absolute accelerations with LIR-DCFP bearings.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

On the Influence of the Vertical Earthquake Component on Structural Responses of High-Rise Buildings Isolated with Double Friction Pendulum Bearings

Phuong Hoa Hoang et al.

Summary: The DFP bearing, derived from the SFP bearing, is capable of accommodating larger displacements in structural vibration control. Studies show that the DFP bearing system effectively reduces the seismic response of high-rise buildings under earthquake excitations, especially in near-source regions.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Engineering, Civil

Experimental and analytical investigation of variable friction pendulum isolator

Jiying Shang et al.

Summary: This study introduces a variable friction mechanism into a traditional friction pendulum bearing by developing a variable friction bearing (VFPB) with a new friction composite. The VFPB is developed using simple processing technology, and a method for determining the active sliding band based on friction coefficient is proposed. The force-displacement relationships and relevant parameters of the VFPB are derived, and parametric studies investigate the effects of friction coefficient and number of sliding bands on its behavior.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Investigation on low-cost friction-based isolation systems for masonry building structures: Experimental and numerical studies

Chunwei Zhang et al.

Summary: An innovative low-cost friction-based seismic isolation system was developed to enhance the seismic capacity of masonry structures, showing significant reduction in earthquake energy transmission and absolute acceleration response during various ground motions.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Slab Vibration and Horizontal-Vertical Coupling in the Seismic Response of Low-rise Irregular Base-isolated and Conventional Buildings

Jean C. Guzman Pujols et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Performance of flexible frame building with horizontal and 3D seismic isolation when subjected to 3D ground shaking

Walaa Eltahawy et al.

EARTHQUAKE SPECTRA (2020)

Add to Collection

Article Construction & Building Technology

Resistance of special-shaped concrete-filled steel tube columns under compression and bending

Xianggang Liu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Add to Collection

Article Engineering, Civil

Modeling of the temperature rises in multiple friction pendulum bearings by means of thermomechanical rheological elements

Vincenzo Bianco et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Concrete-filled steel tubular columns: Test database, design and calibration

Son Thai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

Add to Collection

Article Engineering, Civil

Response of hybrid isolation system during a shake table experiment of a full-scale isolated building

Keri L. Ryan et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2018)

Add to Collection

Article Engineering, Geological

Influence of ground motion characteristics on the optimal single concave sliding bearing properties for base-isolated structures

P. Castaldo et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Strength, stiffness and ductility of concrete-filled steel columns under axial compression

Zhi-Bin Wang et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Engineering, Civil

Axial performance of short concrete filled steel tubes with high- and ultra-high-strength materials

Ming-Xiang Xiong et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Construction & Building Technology

Seismic behavior of circular TSRC columns with studs on the steel section

Xuhong Zhou et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

Behaviour of bolted endplate composite joints to square and circular CFST columns

Huu-Tai Thai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Add to Collection

Article Engineering, Geological

Numerical modelling of variable friction sliding base isolators

Paolo M. Calvi et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Quintuple Friction Pendulum Isolator: Behavior, Modeling, and Validation

Donghun Lee et al.

EARTHQUAKE SPECTRA (2016)

Add to Collection

Article Construction & Building Technology

Rotational stiffness and moment resistance of bolted endplate joints with hollow or CFST columns

Huu-Tai Thai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)

Add to Collection

Article Construction & Building Technology

Influence of Vertical Ground Shaking on Horizontal Response of Seismically Isolated Buildings with Friction Bearings

Keri L. Ryan et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

Add to Collection

Article Construction & Building Technology

Influence of Vertical Ground Shaking on Horizontal Response of Seismically Isolated Buildings with Friction Bearings

Keri L. Ryan et al.

JOURNAL OF STRUCTURAL ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Influence of FPS bearing properties on the seismic performance of base-isolated structures

Paolo Castaldo et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2015)

Add to Collection

Article Acoustics

Effect of vertical component of earthquake on seismic responses of triple concave friction pendulum base-isolated structures

Vahid Loghman et al.

JOURNAL OF VIBRATION AND CONTROL (2015)

Add to Collection

Article Construction & Building Technology

Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members

Lin-Hai Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

Add to Collection

Article Engineering, Civil

Predicting the displacement of triple pendulum bearings in a full-scale shaking experiment using a three-dimensional element

Nhan D. Dao et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2013)

Add to Collection

Article Engineering, Civil

Friction Model for Sliding Bearings under Seismic Excitation

Giuseppe Lomiento et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2013)

Add to Collection

Article Engineering, Geological

Experimental assessment of sliding materials for seismic isolation systems

V. Quaglini et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2012)

Add to Collection

Article Engineering, Civil

Seismic Response of Structures with Variable Friction Pendulum System

V. R. Panchal et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2009)

Add to Collection

Article Engineering, Civil

Modeling Triple Friction Pendulum Bearings for Response-History Analysis

Daniel M. Fenz et al.

EARTHQUAKE SPECTRA (2008)

Add to Collection

Article Construction & Building Technology

Behaviour of concrete-filled steel tubular stub columns subjected to axially local compression

Lin-Hai Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2008)

Add to Collection

Article Construction & Building Technology

Variable friction pendulum system for near-fault ground motions

V. R. Panchal et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2008)

Add to Collection

Article Engineering, Civil

Performance of concrete-filled thin-walled steel tubes under pure torsion

Lin-Hai Han et al.

THIN-WALLED STRUCTURES (2007)

Add to Collection

Article Construction & Building Technology

Cyclic performance of concrete-filled steel CHS columns under flexural loading

LH Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2005)

Add to Collection

Article Construction & Building Technology

Characterization and modeling of friction pendulum bearings subjected to multiple components of excitation

G Mosqueda et al.

JOURNAL OF STRUCTURAL ENGINEERING (2004)

Add to Collection

Article Polymer Science

The properties of poly (tetrafluoroethylene) (PTFE) in compression

PJ Rae et al.

POLYMER (2004)

Add to Collection

Article Engineering, Civil

Physical model for dynamic analysis of structures with FPS isolators

JL Almazán et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2003)

Add to Collection

Article Engineering, Civil

Analytical model of structures with frictional pendulum isolators

JL Almazán et al.

EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS (2002)

Add to Collection

Article Engineering, Mechanical

Sliding wear behavior of PTFE composites

J Khedkar et al.

WEAR (2002)

Add to Collection

Article Engineering, Mechanical

Finite deformation of a polymer: experiments and modeling

A Khan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.