Related references
Note: Only part of the references are listed.Open-cell mullite ceramic foams derived from porous geopolymer precursors with tailored porosity
Jiahuan Shao et al.
JOURNAL OF ADVANCED CERAMICS (2023)
A review on the porous geopolymer preparation for structural and functional materials applications
Haoyang Yu et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)
Preparation and properties of foamed cement for lightweight thermal insulation with Ti-extraction blast furnace slag and sulfoaluminate cement by chemical foaming
Lin Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Synthesis of zeolites by in-situ conversion of geopolymers and their performance of heavy metal ion removal in wastewater:A review
Zhixiao Ren et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Sodium-based alkali-activated foams from self-ignition coal gangue by facile microwave foaming route
Xinyu Li et al.
CERAMICS INTERNATIONAL (2022)
Preparation, properties and applications of fly ash-based porous geopolymers: A review
Xinyu Li et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Thermal conductivity and pore structure analysis of alkali-activated foam cement with supercritical CO2 modified slag: Feasibility evaluation for geothermal applications
Quan Xue et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Microwaves speed up producing scaffold foams with designed porosity from water glass
Liu Yang et al.
MATERIALS & DESIGN (2022)
Robust SiO2-Al2O3/Agarose Composite Aerogel Beads with Outstanding Thermal Insulation Based on Coal Gangue
Jie Gu et al.
GELS (2022)
Modification of ash flow properties of coal rich in calcium and iron by coal gangue addition
Huaizhu Li et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)
Effect of high temperature on the mechanical properties of hierarchical porous cenosphere/geopolymer composite foams
Shu Yan et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)
Effects of surfactants/stabilizing agents on the microstructure and properties of porous geopolymers by direct foaming
Yingjie Qiao et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)
Effect of K/Al Molar Ratio on the Thermo-Mechanical Properties of Metakaolinite-Based Geopolymer Composites
Jan Kohout et al.
POLYMERS (2021)
Using Geopolymer Technology on Synthesizing Leucite Ceramics
Yi-Che Hsieh et al.
POLYMERS (2021)
High-strength porous alumina ceramics prepared from stable wet foams
Linying Wang et al.
JOURNAL OF ADVANCED CERAMICS (2021)
High temperature resistant fly-ash and metakaolin-based alkali-activated foams
Katja Traven et al.
CERAMICS INTERNATIONAL (2021)
Intrinsically hydrophobic magnesium oxychloride cement foam for thermal insulation material
Ke Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
A review on microwave irradiation to the properties of geopolymers: Mechanisms and challenges
Yingfei Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effects of high-temperature exposure on properties of lightweight geopolymer foams incorporating diatomite powders
Shu Yan et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2021)
Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance
Keke Yuan et al.
JOURNAL OF ADVANCED CERAMICS (2021)
Microwave-assisted foaming and sintering to prepare lightweight high-strength polystyrene/carbon nanotube composite foams with an ultralow percolation threshold
Yeping Xie et al.
JOURNAL OF MATERIALS CHEMISTRY C (2021)
Constructing Straight Pores and Improving Mechanical Properties of Gangue-Based Porous Ceramics
Hang Xu et al.
JOURNAL OF RENEWABLE MATERIALS (2021)
Reactivity activation of waste coal gangue and its impact on the properties of cement-based materials - A review
Yuanlan Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of microwave curing on the construction properties of natural soil based geopolymer foam
Muhammad Nadeem et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Silica glass devitrification enhancement by a drop of sodium hydroxide saturated solution
Naohiro Horii et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2020)
Fire resistance of phosphoric acid-based geopolymer foams fabricated from metakaolin and hydrogen peroxide
Qin Shuai et al.
MATERIALS LETTERS (2020)
Optimization of thermal insulation performance of porous geopolymers under the guidance of thermal conductivity calculation
Huan Gao et al.
CERAMICS INTERNATIONAL (2020)
Synthesis of fly ash-based self-supported zeolites foam geopolymer via saturated steam treatment
Le Han et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Influence of precast foam on the pore structure and properties of fly ash-based geopolymer foams
Gonghui Gu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Characterization of Fly Ash Alkali Activated Foams Obtained Using Sodium Perborate Monohydrate as a Foaming Agent at Room and Elevated Temperatures
Lidija Korat et al.
FRONTIERS IN MATERIALS (2020)
Application of microwave energy for rapid fabrication of nano-hydroxyapatite reinforced polycaprolactone composite foam
Nishant Verma et al.
MANUFACTURING LETTERS (2020)
In-situ formation of bulk and porous h-AlN/SiC-based ceramics from geopolymer technique
Dechang Jia et al.
CERAMICS INTERNATIONAL (2019)
Green synthesis of high porosity waste gangue microsphere/geopolymer composite foams via hydrogen peroxide modification
Shu Yan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Influence of different sources of coal gangue used as aluminosilicate powder on the mechanical properties and microstructure of alkali-activated cement
B. J. Frasson et al.
MATERIALES DE CONSTRUCCION (2019)
Crystallization behavior and mechanical properties of high open porosity dolomite hollow microspheres filled hybrid geopolymer foams
Shu Yan et al.
CEMENT & CONCRETE COMPOSITES (2019)
Preparation of a geopolymer from red mud slurry and class F fly ash and its behavior at elevated temperatures
Zhaotong Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical properties and microstructures of hypergolic and calcined coal gangue based geopolymer recycled concrete
Changjiang Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of Phenolic Particles on Mechanical and Thermal Conductivity of Foamed Sulphoaluminate Cement-Based Materials
Xiuzhi Zhang et al.
MATERIALS (2019)
Synthesis of high-purity zircon, zirconia, and silica nanopowders from local zircon sand
Musyarofah et al.
CERAMICS INTERNATIONAL (2019)
Waste-to-resource preparation of glass-containing foams from geopolymers
Chengying Bai et al.
CERAMICS INTERNATIONAL (2019)
Synthesis of zeolite SSZ-13 from coal gangue via ultrasonic pretreatment combined with hydrothermal growth method
Jinfeng Han et al.
ULTRASONICS SONOCHEMISTRY (2019)
Red-clay ceramic powders as geopolymer precursors: Consideration of amorphous portion and CaO content
Martin Keppert et al.
APPLIED CLAY SCIENCE (2018)
Processing, properties and applications of highly porous geopolymers: A review
Chengying Bai et al.
CERAMICS INTERNATIONAL (2018)
Low-temperature fabrication of SiC/geopolymer cellular composites
Chengying Bai et al.
COMPOSITES PART B-ENGINEERING (2018)
Synthesis of novel low-cost porous gangue microsphere/geopolymer composites and their adsorption properties for dyes
Shu Yan et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)
Pore structure evaluation of cementing composites blended with coal by-products: Calcined coal gangue and coal fly ash
Jin Yang et al.
FUEL PROCESSING TECHNOLOGY (2018)
Geopolymer foams obtained by the saponification/peroxide/gelcasting combined route using different soap foam precursors
Marcelo S. Cilla et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Novel 'inorganic gel casting' process for the manufacturing of glass foams
Acacio Rincon et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Thermal Resistance Variations of Fly Ash Geopolymers: Foaming Responses
Heah Cheng-Yong et al.
SCIENTIFIC REPORTS (2017)
Utilization of sodium waterglass from sugar cane bagasse ash as a new alternative hardener for producing metakaolin-based geopolymer cement
Herve Kouamo Tchakoute et al.
CHEMIE DER ERDE-GEOCHEMISTRY (2017)
Structural and chemical properties of thermally treated geopolymer samples
Ljiljana M. Kljajevic et al.
CERAMICS INTERNATIONAL (2017)
Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites
Shu Yan et al.
COMPOSITES PART B-ENGINEERING (2017)
High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant
Chengying Bai et al.
CERAMICS INTERNATIONAL (2017)
Preparation of microporous mullite ceramics by foaming for high temperature thermal isolation
Huishi Guo et al.
CERAMICS INTERNATIONAL (2016)
Fast microwave syntheses of fly ash based porous geopolymers in the presence of high alkali concentration
Sujitra Onutai et al.
CERAMICS INTERNATIONAL (2016)
A microwave foaming method for fabricating glass fiber reinforced phenolic foam
Jaeheon Choe et al.
COMPOSITE STRUCTURES (2016)
Intumescence behaviour of bottom ash based geopolymer mortar through microwave irradiation - As affected by alkali activation
Ehsan Ul Haq et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
A concrete material with waste coal gangue and fly ash used for farmland drainage in high groundwater level areas
Jinman Wang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer
Shu Yan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete
Zuhua Zhang et al.
CEMENT & CONCRETE COMPOSITES (2015)
Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers
Chao-Lung Hwang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes
Zhaoming Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Preparation and characterization of high porosity cement-based foam material
Guochen Sang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: Relation microstructure and effective thermal conductivity
E. Kamseu et al.
ENERGY AND BUILDINGS (2015)
Microwave synthesis of thermal insulating foams from coal derived bottom ash
Ehsan Ul Haq et al.
FUEL PROCESSING TECHNOLOGY (2015)
Cellular structure and mechanical properties of starch-based foamed blocks reinforced with natural fibers and produced by microwave heating
A. Lopez-Gil et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties
P. Hlavacek et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Strength and thermal behavior of low weight foam geopolymer using circulating fluidized bed combustion fly ash
Liu Ze et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2015)
Effect of process parameters on the physical properties of porous geopolymers obtained by gelcasting
Marcelo Strozi Cilla et al.
CERAMICS INTERNATIONAL (2014)
Effects of Foam Agent on Characteristics of Thin-Film Transistor Liquid Crystal Display Waste Glass-Metakaolin-based Cellular Geopolymer
Hau-Shing Shiu et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2014)
Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature
A. M. Rashad et al.
CEMENT AND CONCRETE RESEARCH (2012)
Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements
E. Kamseu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Technical and commercial progress in the adoption of geopolymer cement
Jannie S. J. van Deventer et al.
MINERALS ENGINEERING (2012)
Thermal evolution and crystallization kinetics of potassium-based geopolymer
Peigang He et al.
CERAMICS INTERNATIONAL (2011)
Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer
Pavel Rovnanik
CONSTRUCTION AND BUILDING MATERIALS (2010)
Silica fume as porogent agent in geo-materials at low temperature
E. Prud'hommea et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Characterisation and use of biomass fly ash in cement-based materials
Rejini Rajamma et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology
D. Dimas et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-Based Geopolymer
Jonathan L. Bell et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Geopolymer matrices with improved hydrothermal corrosion resistance for high-temperature applications
B. G. Nair et al.
JOURNAL OF MATERIALS SCIENCE (2007)
The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers
P. Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity
Peter Duxson et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)
29Si NMR study of structural ordering in aluminosilicate geopolymer gels
P Duxson et al.
LANGMUIR (2005)
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
VFF Barbosa et al.
MATERIALS RESEARCH BULLETIN (2003)
Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers
JW Phair et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2002)