4.6 Article

Green and Facile Synthesis of Porous SiO2@C Adsorbents from Rice Husk: Preparation, Characterization, and Their Application in Removal of Reactive Red 120 in Aqueous Solution

Journal

ACS OMEGA
Volume 8, Issue 11, Pages 9904-9918

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acsomega.2c07034

Keywords

-

Ask authors/readers for more resources

A green, novel, fast, and facile approach for synthesizing a SiO2/C nanocomposite series from rice husk (RH) through quenching and grinding techniques has been reported along with its application for the adsorptive removal of Reactive Red 120 (RR120) dye from an aqueous solution. The RH with a high surface area, large pore volumes, and two major components (SiO2 and C) showed promising adsorption capacity for RR120. The adsorption process was controlled by a physical mechanism and the thermodynamic parameters suggested that the adsorption was endothermic and spontaneous.
In this work, a green, novel, fast, and facile approach for synthesizing a SiO2/C nanocomposite series from rice husk (RH) through quenching and grinding techniques has been reported along with its application for the adsorptive removal of Reactive Red 120 (RR120) dye from an aqueous solution. The effect of carbonization temperature on the textural and interfacial features of RH was confirmed by scanning electron microscopy (SEM), while the structure and elemental composition of the as-synthesized RH were investigated via XRD, Brunauer-Emmett-Teller (BET), FT-IR, Raman, and X-ray photoelectron spectroscopy (XPS). The RH had a high surface area (521.35 m2 g-1), large micropores, mesopores, and total pore volumes of 0.5059, 3.9931, and 5.2196 cm3 g-1, while SiO2 and C were the two major components. In the batch adsorption test, the effects of pH, contact time, adsorbent mass, temperature, and initial RR120 concentration were investigated. The maximum adsorption capacity was fitted by Langmuir, Freundlich, Temkin, Dubinin-Radushkevich (D-R), Hasley, Harkins-Jura, and BET isotherm models, and Langmuir was the best-fitted model. In addition, the pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich chemisorption models were used to explain the adsorption kinetics. Additionally, the values of Gibbs free energy, enthalpy, and entropy thermodynamics suggested that the RR120 adsorption phenomenon by RH8-3 was endothermic and spontaneous. The adsorption process was controlled by a physical mechanism, and the maximum adsorption capacity was found to be 151.52 mg g-1 at pH 2, with a contact time of 90 min, adsorbent amount of 0.03 g, and temperature of 313 K. The adopted technique may open up a new alternative route for the mass utilization of RH for the removal of dyes in water and wastewater and also for various practical applications.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available