☆ 4.6 Article

Performance Enhancement of an MoS2-Based Heterojunction Solar Cell with an In2Te3 Back Surface Field: A Numerical Simulation Approach

ACS OMEGA (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Numerical analysis for the efficiency enhancement of MoS2 solar cell: A simulation approach by SCAP-1D

Md Dulal Haque et al.

Summary: The performance parameters of a MoS2 solar cell with Sb2S3 HTL layer were studied, and the influence of various factors on the cell's performance was analyzed. The results showed that the insertion of Sb2S3 HTL layer enhanced the cell's Voc and efficiency by creating appropriate band alignment and reducing recombination losses. This study provides insights for the fabrication of low-cost and high-performance solar cells.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of defects on high efficient perovskite solar cells

Sara Taheri et al.

Summary: In this paper, the organic-inorganic hybrid halide perovskite solar cell was theoretically studied, with emphasis on the impact of defect properties. Results showed that deep defects near the center of perovskite band gap and high defect densities can significantly reduce power conversion efficiency. Harmful and benign defects were classified in perovskite solar cells.

OPTICAL MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Enhancing the photovoltaic performance of Cd-free Cu2ZnSnS4 heterojunction solar cells using SnS HTL and TiO2 ETL

M. Atowar Rahman

Summary: The study proposed a new structure for CZTS solar cells using SnS and TiO2 to improve performance, with simulations showing promising results. By optimizing the thickness, carrier concentration, defect density, working temperature, and back contact metal work function of different layers, the PV performance can be further enhanced.

SOLAR ENERGY (2021)

Add to Collection

Article Energy & Fuels

Influence of back surface field layer on enhancing the efficiency of CIGS solar cell

B. Barman et al.

Summary: The research aims to improve the efficiency of conventional baseline structured CIGS solar cells by adding a PbS layer between the CIGS absorber and the Mo back contact. Simulation results show an increase in conversion efficiency after adding the PbS layer, indicating its potential for enhancing carrier collection efficiency and reducing back surface recombination. Variations and optimization of the PbS layer's thickness, energy band gap, and electron affinity were studied, along with the impact of operating temperature on overall cell performance. These findings suggest promising prospects for future performance and cost-effective solar cells.

SOLAR ENERGY (2021)

Add to Collection

Article Physics, Condensed Matter

CuO based solar cell with V2O5 BSF layer: Theoretical validation of experimental data

Shamim Ahmmed et al.

Summary: This article presents an experimental and simulation study of a novel heterostructure of CuO-based solar cells, showing optimized performance and theoretical validation of experimental photovoltaic parameters. The optimized solar cell exhibited a power conversion efficiency of 12.09% with specific parameters.

SUPERLATTICES AND MICROSTRUCTURES (2021)

Add to Collection

Article Energy & Fuels

Efficiency enhancement of WSe2 heterojunction solar cell with CuSCN as a hole transport layer: A numerical simulation approach

Md. Dulal Haque et al.

Summary: The research used SCAPS-1D software to compare the performance of different solar cell structures, finding that the WSe2 solar cell with CuSCN hole transport layer had the highest efficiency at 24.20%.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Enabling bifacial thin film devices by developing a back surface field using CuxAlOy

Kamala Khanal Subedi et al.

Summary: Bifacial solar cells have the potential to increase energy yield and reduce costs, but thin film bifacial solar cells lag behind crystalline silicon cells. Introducing CuxAlOy as a back buffer layer can improve efficiency.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Defect Study and Modelling of SnX3-Based Perovskite Solar Cells with SCAPS-1D

Md. Samiul Islam et al.

Summary: This study explores the performance of lead-free perovskite solar cells through device modeling and numerical simulation tools, investigating the effects of defects and interface defect on photovoltaic parameters, achieving optimal efficiency for environmentally friendly CH3NH3SnBr3-based perovskite solar cells.

NANOMATERIALS (2021)

Add to Collection

Article Energy & Fuels

Numerical investigation on performance improvement of WS2 thin-film solar cell with copper iodide as hole transport layer

Most Marzia Khatun et al.

Summary: Device modeling of tungsten disulfide-based thin-film solar cell with copper iodide as hole transport layer was conducted using SCAPS-1D software. The results showed that incorporating a copper iodide layer can enhance the performance of the solar cell and increase the conversion efficiency.

SOLAR ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Recent Progress in the Synthesis of MoS2 Thin Films for Sensing, Photovoltaic and Plasmonic Applications: A Review

Driss Mouloua et al.

Summary: Molybdenum disulfide (2D-MoS2) has gained increasing attention for its unique nanoscale properties following the success of graphene. Its switchable bandgap from direct to indirect in ultrathin films offers new prospects for optoelectronic applications. This review presents recent advances in synthesis and characterization of 2D-MoS2 films, as well as their applications in energy harvesting, gas sensing, and plasmonic devices.

MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bandgap Engineering and Near-Infrared-II Optical Properties of Monolayer MoS2: A First-Principle Study

Ke Yang et al.

Summary: The study found that the 1T phase of pure monolayer MoS2 film has better absorption in the NIR-II window, but its poor stability makes it less useful in in vivo bioimaging. By introducing vacancy defects and doping with foreign atoms, the bandgap of the monolayer 2H-MoS2 was successfully controlled and activated in the NIR-II, showing strong absorption.

FRONTIERS IN CHEMISTRY (2021)

Add to Collection

Article Computer Science, Information Systems

On the Investigation of Interface Defects of Solar Cells: Lead-Based vs Lead-Free Perovskite

Marwa Sayed Salem Basyoni et al.

Summary: Perovskite solar cells have attracted significant attention as a competitive solar cell technology due to the remarkable improvement in power conversion efficiency over the past two decades. The impact of defect interfaces between the electron transport layer and the absorber layer, as well as between the absorber layer and the hole transport layer, on the performance of PSCs is studied to determine the optimal value for maximum PCE. While the PCE has not been greatly enhanced for lead-based cells, it has significantly increased for lead-free cells, highlighting the crucial role of interface defects in different types of practical PSC structures.

IEEE ACCESS (2021)

Add to Collection

Article Multidisciplinary Sciences

Design and simulation of a high-performance Cd-free Cu2SnSe3 solar cells with SnS electron-blocking hole transport layer and TiO2 electron transport layer by SCAPS-1D

M. Atowar Rahman

Summary: This study conducted numerical investigations on a novel Cu2SnSe3 based solar cell structure using a simulator, exploring the effects of SnS and TiO2 on cell performance. Results showed that efficiency can be increased up to 27% through parameter optimization.

SN APPLIED SCIENCES (2021)

Add to Collection

Article Energy & Fuels

Enhancement in the efficiency of Sb2Se3 solar cells by adding low lattice mismatch CuSbSe2 hole transport layer

Qingfei Cang et al.

SOLAR ENERGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Performance enhancement of CIGS-based solar cells by incorporating an ultrathin BaSi2 BSF layer

Sayed Rezwanul Islam Biplab et al.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Absorption coefficient estimation of thin MoS2 film using attenuation of silicon substrate Raman signal

Joon Young Kwak

RESULTS IN PHYSICS (2019)

Add to Collection

Article Optics

Experimental, theoretical, and numerical simulation of the performance of CuInxGa(1-x) S2-based solar cells

Amal Bouich et al.

OPTIK (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Efficiency enhancement of Cu2BaSnS4 experimental thin-film solar cell by device modeling

Yousaf Hameed Khattak et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Energy & Fuels

Towards high efficiency inverted Sb2Se3 thin film solar cells

Yu Cao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Physics, Multidisciplinary

Optimization of Highly Efficient Monolayer MoSe2 Based Solar Cells

B. Zaidi et al.

ACTA PHYSICA POLONICA A (2019)

Add to Collection

Review Physics, Multidisciplinary

Silicon solar cells: toward the efficiency limits

Lucio Claudio Andreani et al.

ADVANCES IN PHYSICS-X (2019)

Add to Collection

Article Physics, Applied

Electrical and impedance spectroscopy analysis of sol-gel derived spin coated Cu2ZnSnS4 solar cell

Goutam Kumar Gupta et al.

JOURNAL OF APPLIED PHYSICS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

MoS2: a two-dimensional hole-transporting material for high-efficiency, low-cost perovskite solar cells

Saman Kohnehpoushi et al.

NANOTECHNOLOGY (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of P+-ZnTe back surface contact on photovoltaic performance of ZnTe based solar cells

Hamza Bayad et al.

OPTICAL AND QUANTUM ELECTRONICS (2018)

Add to Collection

Article Energy & Fuels

Solar cell efficiency tables (version 52)

Martin A. Green et al.

PROGRESS IN PHOTOVOLTAICS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Two-Dimensional WSe2/MoS2 p-n Heterojunction-Based Transparent Photovoltaic Cell and Its Performance Enhancement by Fluoropolymer Passivation

Ah-Jin Cho et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Chemistry, Physical

Sb2S3 Solar Cells

Rokas Kondrotas et al.

JOULE (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Recent development of two-dimensional transition metal dichalcogenides and their applications

Wonbong Choi et al.

MATERIALS TODAY (2017)

Add to Collection

Review Green & Sustainable Science & Technology

A review of thin film solar cell technologies and challenges

Taesoo D. Lee et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Review Nanoscience & Nanotechnology

2D transition metal dichalcogenides

Sajedeh Manzeli et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Crystal Structure, Optical, and Electrical Properties of SnSe and SnS Semiconductor Thin Films Prepared by Vacuum Evaporation Techniques for Solar Cell Applications

Ariswan et al.

4TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, 2016 (2017)

Add to Collection

Article Chemistry, Physical

Enhanced rectification, transport property and photocurrent generation of multilayer ReSe2/MoS2 p-n heterojunctions

Xiaoting Wang et al.

NANO RESEARCH (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Sb2S3-Sensitized Solar Cells Via Single-Step Deposition of Sb2S3 Using S/Sb-Ratio-Controlled SbCl3-Thiourea Complex Solution

Yong Chan Choi et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Energy & Fuels

Carrier drift velocity balance mechanism in Si-based thin film solar cells using graded microcrystalline SiGe absorption layer

Ching-Ting Lee et al.

SOLAR ENERGY (2015)

Add to Collection

Proceedings Paper Energy & Fuels

Simulation of High Efficiency CIGS solar cells with SCAPS-1D software

M. Mostefaoui et al.

INTERNATIONAL CONFERENCE ON TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY -TMREES15 (2015)

Add to Collection

Review Chemistry, Physical

Two-dimensional MoS2: Properties, preparation, and applications

Xiao Li et al.

JOURNAL OF MATERIOMICS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Monolayer MoS2 Heterojunction Solar Cells

Meng-Lin Tsai et al.

ACS NANO (2014)

Add to Collection

Review Chemistry, Multidisciplinary

The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets

Manish Chhowalla et al.

NATURE CHEMISTRY (2013)

Add to Collection

Article Energy & Fuels

CdTe Solar Cells at the Threshold to 20% Efficiency

M. Gloeckler et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2013)

Add to Collection

Article Physics, Applied

Molybdenum disulphide/titanium dioxide nanocomposite-poly 3-hexylthiophene bulk heterojunction solar cell

Mariyappan Shanmugam et al.

APPLIED PHYSICS LETTERS (2012)

Add to Collection

Article Energy & Fuels

Ultrathin CdS/CdTe solar cells by sputtering

N. R. Paudel et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Phonons in single-layer and few-layer MoS2 and WS2

A. Molina-Sanchez et al.

PHYSICAL REVIEW B (2011)

Add to Collection

Article Physics, Applied

Thermally evaporated Cu2ZnSnS4 solar cells

K. Wang et al.

APPLIED PHYSICS LETTERS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Development of CZTS-based thin film solar cells

Hironori Katagiri et al.

THIN SOLID FILMS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and optical properties of amorphous and crystalline antimony sulfide thin-films

Matthieu Y. Versavel et al.

THIN SOLID FILMS (2007)

Add to Collection

Article Energy & Fuels

XPS TEM and NRA investigations of Zn(Se,OH)/Zn(OH)(2) films on Cu(In,Ga)(S,Se)(2) substrates for highly efficient solar cells

W Eisele et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2003)

Add to Collection

Article Physics, Applied

Cu(In,Ga)Se2 solar cells with controlled conduction band offset of window/Cu(In,Ga)Se2 layers

T Minemoto et al.

JOURNAL OF APPLIED PHYSICS (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling polycrystalline semiconductor solar cells

M Burgelman et al.

THIN SOLID FILMS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.