☆ 4.7 Article

Experimental and numerical study on the hydrodynamic behaviors of mooring line failure on a net cage in irregular waves and currents

FRONTIERS IN MARINE SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Marine

Experimental and numerical studies on successive failures of two mooring lines of a net cage subjected to currents

Hung-Jie Tang et al.

Summary: This study investigates the hydrodynamic changes due to successive failures of two mooring lines on a net cage that are subjected to currents using model tests and numerical simulations. The results reveal that as the second upstream mooring line fails, the mooring load of the lateral lines, vertical and horizontal movements of the floating collar and tube sinker, and remaining volume of the net cage obviously increase.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Marine

Reliability assessment of mooring system for fish cage considering one damaged mooring line

Hui-Min Hou et al.

Summary: This study assesses the reliability of the mooring system for an offshore aquaculture farm under the scenario of one damaged mooring line. The investigation includes the probability of failure under the accidental limit state (ALS) and the probability of progressive failure of the mooring system. The results indicate that the failure of one mooring line significantly affects the failure probabilities of the remaining lines, and the traditional reliability method without considering progressive failure overestimates the failure probability of the system.

OCEAN ENGINEERING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Engineering Feasibility Assessment of Cage Aquaculture in Offshore Wind Power Generation Areas in Taiwan

Hung-Jie Tang et al.

Summary: This paper investigates the engineering feasibility of cage aquaculture in the offshore wind farm area of Changhua, Taiwan. The study compares different types of net cages under typhoon and monsoon wave conditions and analyzes their submersible function to reduce the impact of waves. The yearly probability of remaining volumes of the selected cages is analyzed, considering the wave scatter diagram and tidal currents. The study also considers the influences of water depth and potential disasters related to the seabed sand waves. The results indicate that the selected cage aquaculture is feasible from an engineering standpoint in the study area.

SUSTAINABILITY (2022)

Add to Collection

Article Engineering, Marine

Effects of mooring line breakage on dynamic responses of grid moored fish farms under pure current conditions

Hui Cheng et al.

Summary: This study utilized the program FhSim to conduct time-domain simulations to investigate the structural responses of fish farms when mooring lines break. The analysis focused on the tension distribution and buoy displacement resulting from breakages at different mooring lines. Suggestions were made for identifying broken mooring lines and predicting maximum tension increment, as well as improving mooring system design and monitoring operations to prevent fish escapes.

OCEAN ENGINEERING (2021)

Add to Collection

Article Engineering, Marine

Experimental and numerical investigations of a mooring line failure of an aquaculture net cage subjected to currents

Hung-Jie Tang et al.

Summary: This study investigated the impact of mooring line failure on an aquaculture net cage through laboratory experiments and numerical simulations. Results showed that when one upstream mooring line failed, the load in the other line increased significantly, but the system reached a new force equilibrium quickly. Additionally, significant yaw rotation of the floating collar of the net-cage system was observed.

OCEAN ENGINEERING (2021)

Add to Collection

Review Engineering, Marine

Review of developments in porous membranes and net-type structures for breakwaters and fish cages

Y. C. Guo et al.

OCEAN ENGINEERING (2020)

Add to Collection

Article Engineering, Civil

Numerical Modeling of the Mooring System Failure of an Aquaculture Net Cage System Under Waves and Currents

Ray-Yeng Yang et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2020)

Add to Collection

Review Engineering, Marine

Fluid-structure interactions of cage based aquaculture: From structures to organisms

Zhijing Xu et al.

OCEAN ENGINEERING (2020)

Add to Collection

Article Engineering, Marine

Numerical study of the mooring system failure of aquaculture net cages under irregular waves and current

Hung-Jie Tang et al.

OCEAN ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

Structural response of high solidity net cage models in uniform flow

H. Moe-Fore et al.

JOURNAL OF FLUIDS AND STRUCTURES (2016)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical study of an aquaculture net cage with floater in waves and current

Trygve Kristiansen et al.

JOURNAL OF FLUIDS AND STRUCTURES (2015)

Add to Collection

Article Engineering, Mechanical

Modelling of current loads on aquaculture net cages

Trygve Kristiansen et al.

JOURNAL OF FLUIDS AND STRUCTURES (2012)

Add to Collection

Article Agricultural Engineering

Numerical simulation of hydrodynamic behavior of gravity cage in irregular waves

Guo-Hai Dong et al.

AQUACULTURAL ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

Numerical Modeling for an In Situ Single-Point-Mooring Cage System

Chai-Cheng Huang et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2010)

Add to Collection

Article Engineering, Marine

A numerical study on dynamic properties of the gravity cage in combined wave-current flow

Yun-Peng Zhao et al.

OCEAN ENGINEERING (2007)

Add to Collection

Article Agricultural Engineering

Modeling volume deformation in gravity-type cages with distributed bottom weights or a rigid tube-sinker

Chai-Cheng Huang et al.

AQUACULTURAL ENGINEERING (2007)

Add to Collection

Article Engineering, Marine

An application of Boussinesq equations to Bragg reflection of irregular waves

Tai-Wen Hsu et al.

OCEAN ENGINEERING (2007)

Add to Collection

Article Agricultural Engineering

Dynamical analysis of net cage structures for marine aquaculture: Numerical simulation and model testing

Chai-Cheng Huang et al.

AQUACULTURAL ENGINEERING (2006)

Add to Collection

Article Engineering, Civil

Moored fish cage dynamics in waves and currents

DW Fredriksson et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2005)

Add to Collection

Article Engineering, Civil

A case study of a modified gravity type cage and mooring system using numerical and physical models

J DeCew et al.

IEEE JOURNAL OF OCEANIC ENGINEERING (2005)

Add to Collection

Article Engineering, Marine

Finite element modeling of net panels using a consistent net element

I Tsukrov et al.

OCEAN ENGINEERING (2003)

Add to Collection

Article Agricultural Engineering

Fish cage and mooring system dynamics using physical and numerical models with field measurements

DW Fredriksson et al.

AQUACULTURAL ENGINEERING (2003)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Fully nonlinear wave-current interactions and kinematics by a BEM-based numerical wave tank

S Ryu et al.

COMPUTATIONAL MECHANICS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.