4.7 Article

Short-process simultaneously recycling cobalt and manganese from environment-hazardous di-methyl-dithiocarbamate chelate slag as lithium-ion battery cathode material

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Green Closed-Loop Cathode Regeneration from Spent NMC-Based Lithium-Ion Batteries through Bioleaching

Minh Phuong Do et al.

Summary: The study successfully regenerated important materials from end-of-life lithium-ion batteries through bioleaching, offering a new solution to address the global issue of electronic waste.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Review Green & Sustainable Science & Technology

A comprehensive review on the recycling of spent lithium-ion batteries: Urgent status and technology advances

Shan Jin et al.

Summary: The development of lithium-ion battery technology is essential for reducing greenhouse gas emissions and transforming global communication and transportation. The increasing quantity of discarded lithium-ion batteries poses a waste-management challenge, but also presents opportunities in ecology and economy. This comprehensive review evaluates state-of-the-art reclamation technologies and discusses the potential environmental hazards and economic potential. The closed-loop recycling chain is recommended for the future outlook of spent LIB recycling.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Environmental

Understanding the effect of nonmetallic impurities in regenerated cathode materials for lithium-ion battery recycling by tracking down impurity elements

Mincheol Beak et al.

Summary: The regeneration of cathode materials from actual industrial scale LIB leachate and purified leachate is the focus of current lithium-ion battery recycling research. Significant amounts of nonmetal and metal elements were detected in the regenerated NMC. The concept of yield of precipitation (YOP) was introduced to categorize the behavior of elements during co-precipitation in the precursors. This categorization of impurity elements will be beneficial for quality control in the LIB recycling industry.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Supply crisis propagation in the global cobalt trade network

Xiaoqi Sun et al.

Summary: Cobalt is recognized as a strategic mineral, but its geographically concentrated supply raises concerns. Understanding the impact of epicenter economies and crisis propagation is important for policy makers.

RESOURCES CONSERVATION AND RECYCLING (2022)

Article Energy & Fuels

One-Pot Regeneration and Remanufacturing of Spent LiNi1-x-yMnxCoyO2 Materials with Organic Acid

Mingwei Shang et al.

Summary: In this article, a green one-pot process is used to recover and remanufacture spent lithium-ion battery materials. The overall element recycling efficiency is high and energy consumption is reduced. The recovered materials show excellent electro-chemical performance.

ENERGY & FUELS (2022)

Article Chemistry, Multidisciplinary

Direct Recycling of Lithium-Ion Battery Cathodes: A Multi-Stage Annealing Process to Recover the Pristine Structure and Performance

Anthony T. Montoya et al.

Summary: This study evaluates the process of thermal relithiation in recovering lost lithium from recycled lithium-ion battery cathodes to restore capacity and performance. The optimized coating and annealing methods are shown to be effective in achieving this goal, and provide a better understanding of the process through the use of new characterization tools.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Review Chemistry, Applied

Recent progress on the recycling technology of Li-ion batteries

Yuqing Wang et al.

Summary: This review comprehensively summarizes the recycling technologies for LiNixCoyMnzO2 and LiFePO4-based LIBs, as well as exhausted anode materials, and discusses the challenges and possible strategies for industrial-scale application. The closed-loop strategy for cycling cathode materials is highlighted as an ideal approach for its economic benefit and environmental friendliness.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

A Rapid and Facile Approach for the Recycling of High-Performance LiNi1-x-yCoxMnyO2Active Materials

Jan O. Binder et al.

Summary: The demand for lithium-ion batteries has increased significantly, leading to a need for efficient recycling methods due to the limited availability and cost of essential materials. A simple and scalable recycling process for a cathode material was developed, allowing for the separation of transition metals and demonstrating good electrochemical performance of the recycled material. This method offers a sustainable and environmentally-friendly solution for lithium-ion battery electrode recycling.

CHEMSUSCHEM (2021)

Review Engineering, Chemical

Geometallurgy of cobalt ores: A review

Quentin Dehaine et al.

Summary: Cobalt is a crucial transition metal with unique physical properties needed for high-tech applications, but its recovery efficiency is generally low due to the variability of cobalt ores. Understanding the geometallurgical properties of cobalt ores, such as ore mineralogy, is important in developing extraction processes. Further research is needed for sustainable cobalt sourcing and processing.

MINERALS ENGINEERING (2021)

Article Engineering, Environmental

One-step selective recovery and cyclic utilization of valuable metals from spent lithium-ion batteries via low-temperature chlorination pyrolysis

Yayun Ma et al.

Summary: The proposed closed loop process combines low-temperature chlorination pyrolysis with water leaching for one-step selective recovery and cyclic utilization of valuable metals from spent lithium-ion batteries (LIBs). The valuable metals can be converted into chloride through pyrolysis and water leaching, achieving over 99.9% recovery rate. The process reduces energy consumption, environmental pollution, and realizes high-value utilization of waste resources.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Engineering, Chemical

A novel synthetic polymer depressant for the flotation separation of chalcopyrite and galena and insights into its interfacial adsorption mechanism

Xingrong Zhang et al.

Summary: The study demonstrated that DTC-PAA is an effective galena depressant, aiding in the flotation separation from chalcopyrite when using IPETC as the collector. DTC-PAA prevented the adsorption of IPETC collector on galena surface, but could not prevent it from adsorbing on chalcopyrite surface.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Depression mechanism of environment-friendly depressant dithiocarbamate chitosan in flotation separation of Cu-Zn sulfide

Jian Liu et al.

Summary: The study investigated the depressant performance and mechanism of DTC-CTS in the flotation separation of chalcopyrite and sphalerite. It was found that DTC-CTS effectively separated chalcopyrite from sphalerite by blocking the adsorption of butyl xanthate on the sphalerite surface, leading to selective separation of chalcopyrite in Cu-Zn sulfide ore.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Environmental Studies

Identification of high-risk agents and relationships in nickel, cobalt, and lithium trade based on resource-dependent networks

Haiping Liu et al.

Summary: This paper introduces a global dependency index to recalculate systemic risks in the trade dependency network, explores the characteristics of global trade patterns and dependency concentration through constructing a resource-dependent network, and analyzes the dependency of countries (regions) at local and global levels while considering the heterogeneity of trading agents.

RESOURCES POLICY (2021)

Article Chemistry, Multidisciplinary

Unveiling the Stabilities of Nickel-Based Layered Oxide Cathodes at an Identical Degree of Delithiation in Lithium-Based Batteries

Qiang Xie et al.

Summary: High nickel content NMC cathodes face challenges, but may show better overall stability under identical delithiation conditions. LiNiO2 exhibits better cyclability and thermal behavior compared to LiNi0.8Mn0.1Co0.1O2.

ADVANCED MATERIALS (2021)

Review Engineering, Environmental

Regeneration and reutilization of cathode materials from spent lithium-ion batteries

Yanlan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Green & Sustainable Science & Technology

Sustainable recovery of nickel, molybdenum, and vanadium from spent hydroprocessing catalysts by an integrated selective route

Di Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Chemical

Production of cobalt from copper-cobalt ores on the African Copperbelt - An overview

F. K. Crundwell et al.

MINERALS ENGINEERING (2020)

Article Materials Science, Multidisciplinary

ZnO Interface Modified LiNi0.6Co0.2Mn0.2O2 Toward Boosting Lithium Storage

Yunyan Li et al.

ENERGY & ENVIRONMENTAL MATERIALS (2020)

Review Electrochemistry

Degradation and Aging Routes of Ni-Rich Cathode Based Li-Ion Batteries

Philipp Teichert et al.

BATTERIES-BASEL (2020)

Article Electrochemistry

1D Nb-doped LiNi1/3Co1/3Mn1/3O2 nanostructures as excellent cathodes for Li-ion battery

Congjie Lv et al.

ELECTROCHIMICA ACTA (2019)

Article Chemistry, Physical

Influence of synthesis method on the performance of the LiFePO4/C cathode material

Xuetian Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Article Metallurgy & Metallurgical Engineering

Synthesis and performance of spherical LiNixCoyMn1-x-yO2 regenerated from nickel and cobalt scraps

Yue Yang et al.

HYDROMETALLURGY (2016)

Article Chemistry, Multidisciplinary

Tuning of Thermal Stability in Layered Li(NixMnyCoz)O2

Jiaxin Zheng et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Metallurgy & Metallurgical Engineering

Preparation of electronic grade manganese sulfate from leaching solution of ferromanganese slag

Sheng Yan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Proceedings Paper Engineering, Chemical

Recovery of nickel and cobalt from dimethyldithiocarbamate precipitation of pyrolusite leaching process

Haifeng Su et al.

ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5 (2013)

Article Chemistry, Physical

The effects of FePO4-coating on high-voltage cycling stability and rate capability of Li[Ni0.5Co0.2Mn0.3]O2

Yansong Bai et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Article Chemistry, Physical

Impedance Analysis of Silicon Nanowire Lithium Ion Battery Anodes

Riccardo Ruffo et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Article Metallurgy & Metallurgical Engineering

Manganese metallurgy review. Part II: Manganese separation and recovery from solution

Wensheng Zhang et al.

HYDROMETALLURGY (2007)