☆ 4.7 Article

Thermal behaviour and thermal runaway propagation in lithium-ion battery systems – A critical review

Journal of Energy Storage (2023)

Related references

Note: Only part of the references are listed.
Article Engineering, Multidisciplinary

Simulation Investigation of Water Spray on Suppressing Lithium-Ion Battery Fires

Changwei Ji et al.

Summary: In this study, a finite volume model was established to simulate the extinguishing process of lithium-ion battery fires, and the impact of water mist on fire suppression was investigated. The findings indicated that the parameters of the spray, such as droplet size, spray velocity, nozzle height, number of nozzles, spray flow, and spray start time, significantly affected the fire extinguishing effect.

FIRE TECHNOLOGY (2023)

Add to Collection
Article Thermodynamics

Heating power effect on the thermal runaway characteristics of large-format lithium ion battery with Li(Ni1/3Co1/3Mn1/3)O2 as cathode

Zonghou Huang et al.

Summary: The study found that heating power has a more significant impact on the thermal runaway behavior of batteries under overheating conditions, with the peak heat release rate increasing with heating power. The severity of thermal runaway deteriorates rapidly with increasing heating power, and thermal runaway induced by higher heating power requires less input thermal energy.

ENERGY (2022)

Add to Collection
Article Thermodynamics

Online quantitative diagnosis of internal short circuit for lithium-ion batteries using incremental capacity method

Dongdong Qiao et al.

Summary: A novel internal short circuit (ISC) diagnosis method based on incremental capacity (IC) curves is proposed in this study. The feasibility and effectiveness of the method are verified through experiments in a real electric vehicle working environment.

ENERGY (2022)

Add to Collection
Article Thermodynamics

A CNN-ABC model for estimation and optimization of heat generation rate and voltage distributions of lithium-ion batteries for electric vehicles

Sercan Yalcin et al.

Summary: Accurately estimating battery voltage and heat generation rate is crucial for safe and efficient operations of electric vehicles. This study proposes a novel scheme combining convolutional neural network and artificial bee colony algorithm for estimating HGR and voltage. The proposed model dynamically reveals hidden features in the data and uses new objective and fitness functions to optimize the estimates.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection
Article Energy & Fuels

A novel heat dissipation structure based on flat heat pipe for battery thermal management system

Yueqi Wang et al.

Summary: The study focuses on the thermal performance and heat dissipation of batteries in flying cars. Flat heat pipe technology is proposed to solve the battery thermal issues, and its effectiveness is verified through experiments. The results show that the battery's maximum temperature occurs at the end of the takeoff stage, while the maximum temperature difference appears during the forward flight segment. With suitable heat dissipation structures and control methods for different discharge conditions and environmental factors, the battery's thermal performance can be improved.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection
Review Engineering, Chemical

A Review of Lithium-Ion Battery Thermal Runaway Modeling and Diagnosis Approaches

Manh-Kien Tran et al.

Summary: This paper provides a comprehensive review of Li-ion battery thermal runaway modeling and discusses various prognostic and diagnostic approaches. Research on thermal runaway prognosis and diagnosis is crucial for ensuring the safety of battery systems.

PROCESSES (2022)

Add to Collection
Article Energy & Fuels

Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation

Kausthubharam et al.

Summary: This article investigates the stress states of an electrode particle during lithiation, considering both intrinsic and extrinsic factors. The influence of concentration dependent properties, external constraints, and charging rate on stress magnitude and concentration gradient is explored. It is found that the behavior of the electrode particle differs under constrained and unconstrained expansion, and the charging rate affects both stress and concentration gradient.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection
Article Electrochemistry

Thermal Modelling Utilizing Multiple Experimentally Measurable Parameters

Anosh Mevawalla et al.

Summary: This paper presents three equivalent thermal circuit models for estimating the internal impedance of a LiFePO4 battery. Experimental measurements and modeling results show good agreement. The models include two 0D models and one 2D model, which analyze the effects of heat sources and thermal conductivity on the battery's thermal behavior.

BATTERIES-BASEL (2022)

Add to Collection
Article Engineering, Electrical & Electronic

Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool Down Large-Sized Graphite/LiFePO4 Battery at High C-Rates

Satyam Panchal et al.

Summary: This study presents an analogous study of the velocity and temperature profiles inside microchannel cooling plates. The experimental work used heat flux sensors and the simulation work used a computational fluid dynamics (CFD) software. The results show that the temperature of the cooling plates increases as the charging-discharging rates and ambient temperature increase.

WORLD ELECTRIC VEHICLE JOURNAL (2022)

Add to Collection
Article Engineering, Multidisciplinary

A Fast Charging-Cooling Coupled Scheduling Method for a Liquid Cooling-Based Thermal Management System for Lithium-Ion Batteries

Siqi Chen et al.

Summary: Efficient fast-charging technology is crucial for extending the driving range of electric vehicles. A liquid cooling-based thermal management system with mini-channels was designed for fast charging of lithium-ion battery modules. A neural network-based regression model was used to predict key parameters and select an optimal charging-cooling schedule.

ENGINEERING (2021)

Add to Collection
Article Thermodynamics

Study on thermal runaway mechanism of 1000 mAh lithium ion pouch cell during nail penetration

Jiajia Xu et al.

Summary: This study investigated the thermal runaway mechanism of lithium ion pouch cells through nail penetration experiments, finding that cells with higher state of charge and penetrated by larger nails are more prone to thermal runaway. The penetration position determines the short circuit location and temperature distribution, while the steel nail also has an impact on temperature distribution.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection
Article Multidisciplinary Sciences

A hybrid thermal management system for high power lithium-ion capacitors combining heat pipe with phase change materials

Danial Karimi et al.

Summary: This paper introduces a hybrid thermal management system using phase change materials and flat heat pipes, which can effectively reduce the temperature of lithium-ion capacitors under high power applications, improving performance and longevity.

HELIYON (2021)

Add to Collection
Article Electrochemistry

Parametric Study on the Safety Behavior of Mechanically Induced Short Circuit for Lithium-Ion Pouch Batteries

Honggang Li et al.

Summary: This study numerically investigates the safety behavior of pouch batteries under mechanical abuse conditions, focusing on the impact factors and parameters. The results provide important theoretical insights for understanding the failure mechanism of batteries under mechanical abuse and safety design.

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2021)

Add to Collection
Article Chemistry, Physical

A self-driven alloying/dealloying approach to nanostructuring micro-silicon for high-performance lithium-ion battery anodes

Qiang Ma et al.

Summary: The self-driven alloying/dealloying approach and vacuum-distillation process improve the utilization of micro-sized silicon, reduce the use of toxic reagents, and maintain a closed-loop material circle, offering an efficient and green pathway for enhancing lithium-storage anodes.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition

Dongsheng Ren et al.

Summary: Thermal runaway, a critical issue in the application of lithium-ion batteries, is a thermalelectrical coupled process where exothermic chemical reactions and internal short circuit coincide. This study investigates the relationship between internal short circuit and thermal runaway under thermal abuse conditions, finding the limited contribution of internal short circuit to thermal runaway. The results provide new insights into battery thermal runaway mechanism and safety design.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Multidisciplinary

A Covalent P-C Bond Stabilizes Red Phosphorus in an Engineered Carbon Host for High-Performance Lithium-Ion Battery Anodes

Shaojie Zhang et al.

Summary: The study explores the use of a vaporization-condensation strategy to address poor conductivity and volume expansion issues in red phosphorus (RP) anodes. By loading RP onto a carbon framework using this method, a high capacity and safety are achieved. Experimental results demonstrate that the RP-PC anode maintains a high specific capacity even under high-rate conditions.

ACS NANO (2021)

Add to Collection
Article Chemistry, Multidisciplinary

A Rational Design for a High-Safety Lithium-Ion Battery Assembled with a Heatproof-Fireproof Bifunctional Separator

Longqing Peng et al.

Summary: A heatproof-fireproof bifunctional separator coated with ammonium polyphosphate (APP) particles on a ceramic-coated separator modified with phenol-formaldehyde resin (CCS@PFR) is designed. The separator acts as a thermal-supporting layer and fireproof layer, enabling the batteries to withstand high temperatures and preventing fire hazards. This design demonstrates excellent safety performance in full cell and pouch cell tests.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Capacity fading mechanism of Li2O loaded NiFe2O4/SiO2 aerogel anode for lithium-ion battery: Ex-situ XPS analysis

S. Balamurugan et al.

Summary: The study synthesized 0-5 wt% Li2O loaded NiFe2O4/SiO2 composite aerogels, showing that the addition of small Li2O wt.% enhances the electrical conductivity. XPS analysis revealed capacity fading mainly comes from irreversible Li2SiO2 accumulation, with metal to metal oxide conversion being partially reversible.

APPLIED SURFACE SCIENCE (2021)

Add to Collection
Article Thermodynamics

Influence of heat pipe assisted terminal cooling on the thermal behavior of a large prismatic lithium-ion cell during fast charging in electric vehicles

Jan Kleiner et al.

Summary: This study investigates the thermal behavior of large prismatic cells during fast charging in electric vehicle conditions, focusing on a novel heat pipe based terminal cooling concept. The results show that this cooling concept can effectively reduce temperature variations and thermal inhomogeneities in the battery, helping to decrease uneven aging.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Thermodynamics

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Qiqiu Huang et al.

Summary: The study successfully prepared a novel flexible composite SBS@PA/EG for battery thermal management systems, effectively controlling the maximum temperature and temperature difference of the battery module.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Thermodynamics

A comparative study between air cooling and liquid cooling thermal management systems for a high-energy lithium-ion battery module

Mohsen Akbarzadeh et al.

Summary: This study compared the effect of air type and liquid type thermal management systems on a high-energy lithium-ion battery module, investigating the parasitic power consumption and cooling performance of a 48V module. The results showed that the liquid type thermal management system can achieve lower module temperatures and better temperature uniformity under a certain power consumption. This research represents a step towards the development of energy-efficient battery thermal management systems.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Thermodynamics

Synergistic effect of insulation and liquid cooling on mitigating the thermal runaway propagation in lithium-ion battery module

Xinyu Rui et al.

Summary: This study investigated the synergy of heat dissipation and thermal insulation in the elimination of thermal runaway propagation (TRP) in Li-ion batteries of electric vehicles (EVs). It was found that pure liquid cooling alone is not effective in mitigating TRP, and successful inhibition of TRP requires the cooperation of thermal insulation and liquid cooling. Six critical conditions for TRP prevention were identified, and a theoretical diagram illustrating the relationship between heat dissipation and thermal insulation was obtained from modeling analysis.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Chemistry, Applied

Pure cellulose lithium-ion battery separator with tunable pore size and improved working stability by cellulose nanofibrils

Dong Lv et al.

Summary: The cellulose nanofibrils reinforced cellulose paper as a LIBs separator showed improved mechanical strength and cycle performance, with the tensile strength increased by 227% compared to commercial cellulose separators, and a capacity retention ratio of 91% after 100 cycles.

CARBOHYDRATE POLYMERS (2021)

Add to Collection
Review Energy & Fuels

High-Voltage Single-Crystal Cathode Materials for Lithium-Ion Batteries

Yinzhong Wang et al.

Summary: This paper reviews the advantages, progress, and challenges of single-crystal cathodes (SCCs) for high-voltage cathode materials, as well as summarizes efforts to improve the electrochemical performance of SCCs. Providing insights into the development of high-performance cathodes for practical LIBs, this contributes to the advancement of practical LIB technologies.

ENERGY & FUELS (2021)

Add to Collection
Article Engineering, Chemical

Gel polymer electrolyte based on PVDF-HFP matrix composited with rGO-PEG-NH2 for high-performance lithium ion battery

Pei Xu et al.

Summary: A series of composite gel polymer electrolytes (GPEs) based on PVDF-HFP, [EMIM][TFSI], LiTFSI, and rGO-PEG-NH2 were successfully prepared by solution casting method. The 3P5E2LG-10 GPE exhibited good conductivity and lithium ion transport properties at 30 degrees Celsius.

JOURNAL OF MEMBRANE SCIENCE (2021)

Add to Collection
Article Thermodynamics

Experimental investigation on the characteristics of thermal runaway and its propagation of large-format lithium ion batteries under overcharging and overheating conditions

Zonghou Huang et al.

Summary: This study investigates the characteristics and mechanism of thermal runaway (TR) and its propagation in lithium-ion batteries induced by overcharging and overheating. Results show that TR induced by overcharging is more severe than that induced by overheating, with a constant critical thermal energy for fully charged batteries.

ENERGY (2021)

Add to Collection
Article Chemistry, Physical

Facile and Effective Positive Temperature Coefficient (PTC) Layer for Safer Lithium-Ion Batteries

Hai-Zu Jin et al.

Summary: This study presents a novel, safe cathode design for lithium-ion batteries by layering a PTC material between the aluminum foil and active cathode material to prevent thermal runaway. This design not only demonstrates excellent safety performance during overheating scenarios but also has no negative impact on cell performance.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection
Article Thermodynamics

Avoiding thermal runaway propagation of lithium-ion battery modules by using hybrid phase change material and liquid cooling

Wencan Zhang et al.

Summary: This paper introduces a novel hybrid battery thermal management system based on phase change material (PCM) and liquid cooling, which utilizes PCM for maintaining operating temperature of the battery and liquid cooling system for preventing thermal runaway propagation. Numerical analysis shows that the system can meet heat dissipation demand under extreme operating conditions.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Energy & Fuels

Surrogate model-based heat dissipation optimization of air-cooling battery packs involving herringbone fins

Congbo Li et al.

Summary: This paper focuses on analyzing the air cooling battery thermal management system for lithium-ion batteries used in electric vehicles. By proposing a new heat dissipation method and establishing a multi-objective optimization model, the research successfully improves the heat dissipation effect of the battery modules and controls the cooling cost effectively.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection
Article Thermodynamics

Thermal performance of lithium-ion batteries applying forced air cooling with an improved aluminium foam heat sink design

Yuanlong Wang et al.

Summary: A lithium-ion battery thermal management system using forced air cooling with open-cell aluminum foam was proposed. The thermal interaction between battery cells becomes more obvious after using aluminum foam, which can significantly reduce battery temperature rise. However, aluminum foam may cause flow resistance and pressure loss, leading to uneven temperature distribution on the battery surface.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection
Article Chemistry, Physical

Low-Concentrated Lithium Hexafluorophosphate Ternary-based Electrolyte for a Reliable and Safe NMC/Graphite Lithium-Ion Battery

Georgios Nikiforidis et al.

Summary: This study explores the use of low Li salt concentration in a novel electrolyte, showing equivalent performance to commercial counterparts. The proposed electrolyte operates in a wide temperature window, is nonflammable, and exhibits fast wetting properties in NMC/graphite pouch cells, ensuring high performance.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection
Article Polymer Science

Thermal Stability Analysis of Lithium-Ion Battery Electrolytes Based on Lithium Bis(trifluoromethanesulfonyl)imide-Lithium Difluoro(oxalato)Borate Dual-Salt

Ya-Ping Yang et al.

Summary: The research indicated that the dual-salt electrolyte of LiTFSI-LiODFB demonstrates better thermal stability at high temperatures compared to conventional LiPF6 carbonate electrolytes. Analysis through ARC and DSC revealed decomposition temperatures of 138.5 degrees C in DSC and 271.0 degrees C in ARC tests, with autocatalytic models determining the pyrolysis kinetic parameters.

POLYMERS (2021)

Add to Collection
Article Energy & Fuels

Effects of short-term over-discharge cycling on the performance of commercial 21,700 lithium-ion cells and the identification of degradation modes

Zhenpo Wang et al.

Summary: The study found that over-discharge of the battery leads to capacity loss, and the depth of discharge has a more serious impact on cell performance than the number of cycles, with continuous over-discharge cycling accumulating this impact; while the irreversible capacity loss of batteries is caused by the loss of lithium inventory, dissolution of copper current collector, and exfoliation of active material particles.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Article Energy & Fuels

Simulation and analysis of air cooling configurations for a lithium-ion battery pack

Xinke Li et al.

Summary: This paper aims to analyze and improve the cooling effect of battery cells by optimizing airflow configuration and layout in U-type air-cooling BTMS through modeling and numerical simulation method. Results show that the best cooling performance is achieved when the number of inlet and outlet manifolds is increased to three in the selected designs. The obtained optimum design is further analyzed to confirm its applicability in a wider range of total inlet airflow rates and temperatures.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Article Energy & Fuels

Performance investigation of a passive battery thermal management system applied with phase change material

Yanan Wang et al.

Summary: An effective thermal management system for lithium-ion batteries is crucial to control the temperature and increase the safety of the batteries. The use of phase change material units can effectively decrease the maximum temperature and temperature difference within the battery, providing good heat storage and temperature equalization capabilities. Further investigation into the design parameters of the phase change material unit can optimize the performance of the thermal management system.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Article Chemistry, Physical

Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: Recent advances and perspectives

Xin Lai et al.

Summary: This comprehensive review investigates the mechanism and evolutionary process of internal short circuit (ISC) within lithium-ion batteries (LIBs), covering types, inducing mechanisms, evolution stages, experimental methods, detection and diagnosis techniques, prevention methods, and future prospects. The study emphasizes the importance of improving safety in LIBs through advancements in modeling, simulation, detection, and prevention of ISC.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Room-Temperature Solid-State Lithium-Ion Battery Using a LiBH4-MgO Composite Electrolyte

Valerio Gulino et al.

Summary: Research has shown that by mixing with MgO, the Li-ion conductivity of LiBH4 can be improved, but there are still lifecycle issues at room temperature, which can be mitigated by applying multiple charge/discharge cycles at 60 degrees C to form a stable solid electrolyte interphase.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection
Article Thermodynamics

Design of battery thermal management system based on phase change material and heat pipe

Kai Chen et al.

Summary: This paper investigates the performance of battery thermal management system with PCM and HP, finding that PCM can effectively reduce the temperature difference in the battery pack. Numerical methods show that increasing environmental convective heat transfer coefficient and PCM thickness can lower the maximum temperature in the battery pack while raising the temperature difference.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Add to Collection
Article Engineering, Multidisciplinary

Extreme Learning Machine-Based Thermal Model for Lithium-Ion Batteries of Electric Vehicles under External Short Circuit

Ruixin Yang et al.

Summary: A novel thermal model was developed to capture the temperature behavior of lithium-ion batteries under external short circuit conditions, which showed higher computational efficiency, better fitting, and prediction accuracy compared to a traditional thermal model.

ENGINEERING (2021)

Add to Collection
Article Chemistry, Physical

Heteroepitaxial interface of layered cathode materials for lithium ion batteries

Chunxiao Zhang et al.

Summary: Electrochemical energy storage systems with high energy/power density are crucial for the development of intelligent society, and layered cathode materials have attracted great research interest due to their high specific capacity and operating voltage. However, structural degradation and side-reactions at high voltage hinder their further development. Constructing stable heteroepitaxial interfaces on layered cathode materials through interface engineering is recognized as an effective strategy to address these issues comprehensively.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

A Prelithiation Separator for Compensating the Initial Capacity Loss of Lithium-Ion Batteries

Zhixiang Rao et al.

Summary: The use of a prelithiation separator with a Li2S/Co nanocomposite coating layer can effectively compensate for initial capacity loss in lithium-ion batteries, leading to an increase in reversible capacity and energy density. The excellent electrochemical performance and scalable production of the prelithiation separator demonstrate its great potential for application in the lithium-ion battery industry.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Comprehensive Investigation of a Slight Overcharge on Degradation and Thermal Runaway Behavior of Lithium-Ion Batteries

Guangxu Zhang et al.

Summary: This study comprehensively investigates the impact of different degrees of overcharge on lithium-ion batteries, revealing that single overcharge has little influence on cell capacity but severely degrades thermal stability. The degradation mechanisms caused by overcharge, mainly led by lithium plating, are explored.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Localized Water-In-Salt Electrolyte for Aqueous Lithium-Ion Batteries

Pauline Jaumaux et al.

Summary: A localized water-in-salt (LWIS) electrolyte based on low-cost lithium nitrate (LiNO3) salt and 1,5-pentanediol (PD) was developed, which improved electrolyte stability and cycling performance for aqueous Li-ion batteries. By in situ gelling the LWIS electrolyte with tetraethylene glycol diacrylate (TEGDA) monomer, the stability window was expanded to 3.0 V, resulting in excellent cycling performance with high Coulombic efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection
Article Thermodynamics

Performance analysis and optimization of a novel cooling plate with non-uniform pin-fins for lithium battery thermal management

Rongchao Zhao et al.

Summary: This paper investigates the performance of a cooling plate with non-uniform pin-fins using experimental and CFD methods, optimizing the design through multi-objective optimization algorithm and comparing it with a traditional design. The optimized design shows significant reductions in power consumption, weight, and temperature standard deviation, as well as a decrease in maximum temperature.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Thermodynamics

Numerical investigation of the direct liquid cooling of a fast-charging lithium-ion battery pack in hydrofluoroether

Xiaojun Tan et al.

Summary: This paper proposes a novel direct liquid battery cooling system for fast-charging battery packs based on a hydrofluoroether coolant. Through high-fidelity CFD simulations, it is found that optimizing channel design and coolant velocity can improve energy density and reduce power consumption, while a multilayer structure and cross-flowing configuration can reduce temperature difference and standard deviation.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection
Article Energy & Fuels

Modeling and Analysis of Heat Dissipation for Liquid Cooling Lithium-Ion Batteries

Jiabin Duan et al.

Summary: A numerical study was conducted to investigate the three-dimensional temperature distribution of a battery liquid cooling system, evaluating the impact of channel size and inlet conditions on temperature field. Based on experimental measurements, two temperature control strategies were proposed, showing that channel width and inlet water flow rate significantly influence the battery module temperature. Lowering the inlet temperature can reduce maximum temperature, but may lead to higher energy consumption. One specific control strategy demonstrated a substantial reduction in parasitic energy consumption compared to traditional methods.

ENERGIES (2021)

Add to Collection
Article Thermodynamics

Over-heating triggered thermal runaway behavior for lithium-ion battery with high nickel content in positive electrode

Haimin Wang et al.

Summary: The experiment simulated thermal abuse of NCM811 battery using different heating methods, revealing that thermal runaway triggered by local heating caused more serious damage compared to uniform heating.

ENERGY (2021)

Add to Collection
Article Thermodynamics

Experimental investigation on thermal runaway propagation of large format lithium ion battery modules with two cathodes

Zonghou Huang et al.

Summary: This study compares the thermal runaway propagation behavior of NCM and LFP modules, revealing that NCM modules are more prone to thermal runaway propagation compared to LFP modules, with higher total mass of combustible gases and toxicity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection
Review Chemistry, Applied

A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards

Yuqing Chen et al.

Summary: Efficient and reliable energy storage systems are essential for modern society, with lithium-ion batteries (LIBs) being widely used but facing safety challenges. This review examines LIB safety issues, strategies for improvement, and current testing standards, providing insights into potential future developments for safer LIBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection
Article Energy & Fuels

Experimental study and numerical simulation of a Lithium-ion battery thermal management system using a heat pipe

Atieh Alihosseini et al.

Summary: The study investigates a lithium-ion battery heat management system using a heat pipe, and experimentally explores its performance. The experimental results show that while increasing ambient temperature leads to a rise in battery surface temperature, the decrease in thermal resistance of the heat pipe moderates this effect and controls the battery surface temperature with forced convection, distributing temperature uniformly. The use of the heat pipe helps maintain more stable temperature conditions with lower fluctuations in consecutive battery cycles.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection
Article Chemistry, Physical

Thermal-responsive, super-strong, ultrathin firewalls for quenching thermal runaway in high-energy battery modules

Lei Li et al.

Summary: The smart firewall concept effectively prevents thermal runaway propagation in lithium-ion batteries, providing functions of heat dissipation, fire extinguishing, and thermal insulation. By utilizing non-flammable phase change materials and flexible silica nanofiber mats, the firewall can switch thermal physical properties and successfully suppress TR propagation.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Consecutive chemical bonds reconstructing surface structure of silicon anode for high-performance lithium-ion battery

Qiushi Wang et al.

Summary: The study proposes a new method to stabilize silicon by successive chemical bond reconstruction, assembling silicon nanoparticles in a carbon-copper framework to provide short-range electron transfer and pulverization suppression, achieving high performance and stability in lithium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection
Article Chemistry, Physical

Lithium ion battery degradation: what you need to know

Jacqueline S. Edge et al.

Summary: The article summarizes the degradation of lithium-ion batteries into three levels: mechanisms, observable consequences, and operational effects. It identifies five principal and thirteen secondary mechanisms leading to five observable modes, and presents a flowchart and table illustrating the feedback loops and experimental conditions for investigating battery degradation.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Add to Collection
Article Chemistry, Physical

Quantifying and modeling of stress-driven short-circuits in lithium-ion batteries in electrified vehicles

Binghe Liu et al.

Summary: The study revealed the quantitative relationship between battery deformation and internal short circuit, quantifying the stress-driven behavior and establishing short circuit criteria for various mechanical loadings. The research successfully identified minor and major short circuits under different abusive loads, providing a fundamental understanding of stress-driven short circuits in a broader context.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Chemistry, Physical

Hybrid perovskite-like iodobismuthates as low-cost and stable anode materials for lithium-ion battery applications

Kingshuk Roy et al.

Summary: The hybrid iodobismuthates IMB, ADB and ATB demonstrate impressive Li-storage capacities, good rate capabilities and stability as environmentally-friendly anodes for lithium-ion batteries. Further development and optimization of this new family may be possible by tuning cations within the series.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection
Article Energy & Fuels

Comparative study on substitute triggering approaches for internal short circuit in lithium-ion batteries

Lishuo Liu et al.

APPLIED ENERGY (2020)

Add to Collection
Article Energy & Fuels

Characterization of external short circuit faults in electric vehicle Li-ion battery packs and prediction using artificial neural networks

Ruixin Yang et al.

APPLIED ENERGY (2020)

Add to Collection
Article Thermodynamics

A lithium-ion battery-thermal-management design based on phase-change-material thermal storage and spray cooling

Shurong Lei et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection
Article Engineering, Mechanical

Mass-Spring-Damping Theory Based Equivalent Mechanical Model for Cylindrical Lithium-ion Batteries under Mechanical Abuse

Wenwei Wang et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2020)

Add to Collection
Article Automation & Control Systems

Online Fault Diagnosis of External Short Circuit for Lithium-Ion Battery Pack

Rui Xiong et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Add to Collection
Article Thermodynamics

Hybrid thermal management of lithium-ion batteries using nanofluid, metal foam, and phase change material: an integrated numerical-experimental approach

Mehrdad Kiani et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection
Article Multidisciplinary Sciences

Internal short circuit detection in Li-ion batteries using supervised machine learning

Arunava Naha et al.

SCIENTIFIC REPORTS (2020)

Add to Collection
Article Thermodynamics

Experimental study on thermal runaway and its propagation in the large format lithium ion battery module with two electrical connection modes

Zonghou Huang et al.

ENERGY (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Internal short circuit detection for lithium-ion battery pack with parallel-series hybrid connections

Yue Pan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection
Article Chemistry, Physical

Internal short circuit and failure mechanisms of lithium-ion pouch cells under mechanical indentation abuse conditions : An experimental study

Xiaoqing Zhu et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Energy & Fuels

Lithium-ion cell response to mechanical abuse: Three-point bend

Johanna K. Stark Goodman et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection
Article Energy & Fuels

Experimental study on a novel safety strategy of lithium-ion battery integrating fire suppression and rapid cooling

Yujun Liu et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection
Article Thermodynamics

Thermal performance of cylindrical lithium-ion battery thermal management system integrated with mini-channel liquid cooling and air cooling

Wen Yang et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection
Article Chemistry, Applied

Lithiated Nafion-garnet ceramic composite electrolyte membrane for solid-state lithium metal battery

Jing Gao et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection
Article Chemistry, Applied

Quasi-solid-state polymer plastic crystal electrolyte for subzero lithium-ion batteries

Yumei Zhou et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Heat Dissipation Analysis on the Liquid Cooling System Coupled with a Flat Heat Pipe of a Lithium-Ion Battery

Nan Mei et al.

ACS OMEGA (2020)

Add to Collection
Review Energy & Fuels

A Review of Lithium-Ion Battery Fire Suppression

Mohammadmahdi Ghiji et al.

ENERGIES (2020)

Add to Collection
Article Engineering, Chemical

The mechanism of side reaction induced capacity fading of Ni-rich cathode materials for lithium ion batteries

Daozhong Hu et al.

Journal of Energy Chemistry (2020)

Add to Collection
Article Nanoscience & Nanotechnology

Degradation Mechanism Study and Safety Hazard Analysis of Overdischarge on Commercialized Lithium-ion Batteries

Tianyi Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Multi-physics safety model based on structure damage for lithium-ion battery under mechanical abuse

Li Yiding et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection
Review Chemistry, Physical

A review of safety strategies of a Li-ion battery

Pius Victor Chombo et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection
Article Energy & Fuels

A combined experimental and simulation approach for short circuit prediction of 18650 lithium-ion battery under mechanical abuse conditions

Muhammad Sheikh et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection
Article Energy & Fuels

Thermal management analysis using heat pipe in the high current discharging of lithium-ion battery in electric vehicles

Hamidreza Behi et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection
Article Thermodynamics

Thermal performance of axial air cooling system with bionic surface structure for cylindrical lithium-ion battery module

Wen Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection
Review Multidisciplinary Sciences

Toward a Safer Battery Management System: A Critical Review on Diagnosis and Prognosis of Battery Short Circuit

Rui Xiong et al.

ISCIENCE (2020)

Add to Collection
Article Chemistry, Physical

The Thermal Stability of Lithium Solid Electrolytes with Metallic Lithium

Rusong Chen et al.

JOULE (2020)

Add to Collection
Review Chemistry, Physical

Mitigating Thermal Runaway of Lithium-Ion Batteries

Xuning Feng et al.

JOULE (2020)

Add to Collection
Article Electrochemistry

Preventing Cell-to-Cell Propagation of Thermal Runaway in Lithium-Ion Batteries

Rengaswamy Srinivasan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Review Chemistry, Physical

Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review

Binghe Liu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Thermodynamics

Structural optimization of lithium-ion battery for improving thermal performance based on a liquid cooling system

Zhuangzhuang Shang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection
Article Engineering, Environmental

Experimental investigation on the thermal runaway and its propagation in the large format battery module with Li(Ni1/3Co1/3Mn1/3)O2 as cathode

Huang Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection
Article Energy & Fuels

Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study

Z. Y. Jiang et al.

APPLIED ENERGY (2019)

Add to Collection
Article Energy & Fuels

Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes

Gui-Liang Xu et al.

NATURE ENERGY (2019)

Add to Collection
Article Energy & Fuels

Investigating the thermal runaway mechanisms of lithium-ion batteries based on thermal analysis database

Xuning Feng et al.

APPLIED ENERGY (2019)

Add to Collection
Article Thermodynamics

A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module

Siqi Chen et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection
Article Chemistry, Physical

Thermophysical properties of trimethylolethane (TME) hydrate as phase change material for cooling lithium-ion battery in electric vehicle

Ryo Koyama et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Review Thermodynamics

A review of lithium ion battery failure mechanisms and fire prevention strategies

Qingsong Wang et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

Add to Collection
Article Energy & Fuels

Modelling and characterisation of ultrasonic joints for Li-ion batteries to evaluate the impact on electrical resistance and temperature raise

Abhishek Das et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection
Article Energy & Fuels

Lithium-ion capacitor safety assessment under electrical abuse tests based on ultrasound characterization and cell opening

L. Oca et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection
Article Energy & Fuels

Electrospun Core-Shell Nanofiber as Separator for Lithium-Ion Batteries with High Performance and Improved Safety

Zheng Liang et al.

ENERGIES (2019)

Add to Collection
Article Energy & Fuels

Thermal runaway and thermal runaway propagation in batteries: What do we talk about?

Alexander Boerger et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection
Article Energy & Fuels

State of charge-dependent failure prediction model for cylindrical lithium-ion batteries under mechanical abuse

Wang Wenwei et al.

APPLIED ENERGY (2019)

Add to Collection
Article Thermodynamics

Thermal optimization of a kirigami-patterned wearable lithium-ion battery based on a novel design of composite phase change material

Mengzhu Yang et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection
Article Thermodynamics

Experimental investigation on thermal management of cylindrical Li-ion battery pack based on vapor chamber combined with fin structure

Wangyu Liu et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection
Article Electrochemistry

Impact of Cell Size and Format on External Short Circuit Behavior of Lithium-Ion Cells at Varying Cooling Conditions: Modeling and Simulation

Alexander Rheinfeld et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Thermodynamics

Numerical investigation on integrated thermal management for a lithium-ion battery module with a composite phase change material and liquid cooling

Zhiguo An et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection
Article Energy & Fuels

Experimental study of the impedance behavior of 18650 lithium-ion battery cells under deforming mechanical abuse

Markus Spielbauer et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection
Article Electrochemistry

From Calorimetry Measurements to Furthering Mechanistic Understanding and Control of Thermal Abuse in Lithium-Ion Cells

Randy C. Shurtz et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Chemistry, Physical

A temperature-sensitive poly(3-octylpyrrole)/carbon composite as a conductive matrix of cathodes for building safer Li-ion batteries

Hui Li et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection
Article Electrochemistry

LiFePO4-Coated LiNi0.5Co0.2Mn0.3O2 Cathode Materials with Improved High Voltage Electrochemical Performance and Enhanced Safety for Lithium Ion Pouch Cells

Lei Zhu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Electrochemistry

Experimental Study on Module-to-Module Thermal Runaway-Propagation in a Battery Pack

Shang Gao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection
Article Thermodynamics

Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)

Xin Ye et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection
Article Electrochemistry

Electrical behavior of overdischarge-induced internal short circuit in lithium-ion cells

Xin Lai et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection
Article Thermodynamics

Performance analysis of a novel thermal management system with composite phase change material for a lithium-ion battery pack

Xiaoming Wang et al.

ENERGY (2018)

Add to Collection
Article Engineering, Chemical

Thermal shrinkage and microscopic shutdown mechanism of polypropylene separator for lithium-ion battery: In-situ ultra-small angle X-ray scattering study

Bijin Xiong et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection
Review Green & Sustainable Science & Technology

A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles

V. Ruiz et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Improving Li+ Kinetics and Structural Stability of Nickel-Rich Layered Cathodes by Heterogeneous Inactive-Al3+ Doping

Peiyu Hou et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection
Article Computer Science, Information Systems

An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application

Jianan Zhang et al.

IEEE ACCESS (2018)

Add to Collection
Article Thermodynamics

Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle

Jiaqiang E et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection
Article Engineering, Multidisciplinary

Comparative study of mechanical-electrical-thermal responses of pouch, cylindrical, and prismatic lithium-ion cells under mechanical abuse

Li Wei et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Investigation of a commercial lithium-ion battery under overcharge/over-discharge failure conditions

Dongxu Ouyang et al.

RSC ADVANCES (2018)

Add to Collection
Article Energy & Fuels

Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release

Enyuan Hu et al.

NATURE ENERGY (2018)

Add to Collection
Article Electrochemistry

Quasi-Isothermal External Short Circuit Tests Applied to Lithium-Ion Cells: Part I. Measurements

Alexander Rheinfeld et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection
Article Energy & Fuels

Experimental investigation of thermal and strain management for lithium-ion battery pack in heat pipe cooling

Liyuan Feng et al.

JOURNAL OF ENERGY STORAGE (2018)

Add to Collection
Article Energy & Fuels

Detecting the internal short circuit in large-format lithium-ion battery using model-based fault-diagnosis algorithm

Xuning Feng et al.

JOURNAL OF ENERGY STORAGE (2018)

Add to Collection
Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits

Donal P. Finegan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection
Article Thermodynamics

Experimental and numerical investigation on integrated thermal management for lithium-ion battery pack with composite phase change materials

Yongqi Xie et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection
Article Chemistry, Physical

High-performance lithium ion batteries using SiO2-coated LiNi0.5Co0.2Mn0.3O2 microspheres as cathodes

Chao Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection
Article Chemistry, Physical

Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study

Stephen Wilke et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

External short circuit performance of Graphite-LiNi1/3CO1/3Mn1/3O2 and Graphite-LiNi0.3Co0.15Al0.05O2 cells at different external resistances

Akos Kriston et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Chemistry, Physical

An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery

Dongsheng Ren et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection
Article Electrochemistry

Tracking Internal Temperature and Structural Dynamics during Nail Penetration of Lithium-Ion Cells

Donal P. Finegan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Electrochemistry

Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion Batteries

Roland Jung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection
Article Multidisciplinary Sciences

Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries

Kai Liu et al.

SCIENCE ADVANCES (2017)

Add to Collection
Article Multidisciplinary Sciences

Toxic fluoride gas emissions from lithium-ion battery fires

Fredrik Larsson et al.

SCIENTIFIC REPORTS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries

Han Gao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Chemistry, Physical

4.0 V Aqueous Li-Ion Batteries

Chongyin Yang et al.

JOULE (2017)

Add to Collection
Article Energy & Fuels

A detailed thermal study of usual LiNi0.5Co0.2Mn0.3O2, LiMn2O4 and LiFePO4 cathode materials for lithium ion batteries

Yangyang Yu et al.

JOURNAL OF ENERGY STORAGE (2017)

Add to Collection
Article Thermodynamics

A forced gas cooling circle packaging with liquid cooling plate for the thermal management of Li-ion batteries under space environment

Shengnan Wang et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection
Article Thermodynamics

Thermal performance of liquid cooling based thermal management system for cylindrical lithium-ion battery module with variable contact surface

Zhonghao Rao et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries

Yiqing Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Energy & Fuels

Model-based fault diagnosis approach on external short circuit of lithium-ion battery used in electric vehicles

Zeyu Chen et al.

APPLIED ENERGY (2016)

Add to Collection
Article Thermodynamics

Comparison of different cooling methods for lithium ion battery cells

Dafen Chen et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection
Article Thermodynamics

Thermo-electrochemical model for forced convection air cooling of a lithium-ion battery module

Wei Tong et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection
Article Thermodynamics

A 3D thermal runaway propagation model for a large format lithium ion battery module

Xuning Feng et al.

ENERGY (2016)

Add to Collection
Article Chemistry, Multidisciplinary

A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine-ceramic composite modification of polyolefin membranes

Jianhui Dai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection
Article Chemistry, Physical

Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study

Donal P. Finegan et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection
Review Green & Sustainable Science & Technology

Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles

Shashank Arora et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection
Article Multidisciplinary Sciences

Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries

Rui Guo et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Energy & Fuels

Experimental study of a cylindrical lithium ion battery thermal management using phase change material composites

Gholamreza Karimi et al.

JOURNAL OF ENERGY STORAGE (2016)

Add to Collection
Article Energy & Fuels

Thermal runaway propagation model for designing a safer battery pack with 25 Ah LiNixCoyMnzO2 large format lithium ion battery

Xuning Feng et al.

APPLIED ENERGY (2015)

Add to Collection
Article Thermodynamics

Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model

Tao Wang et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection
Article Chemistry, Physical

An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries

Rui Zhao et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Functional separator consisted of polyimide nonwoven fabrics and polyethylene coating layer for lithium-ion batteries

Chuan Shi et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Safer lithium ion batteries based on nonflammable electrolyte

Ziqi Zeng et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse

Chao Zhang et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module

Xuning Feng et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Chemistry, Physical

Characterization of plasticity and fracture of shell casing of lithium-ion cylindrical battery

Xiaowei Zhang et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection
Article Electrochemistry

Characterization of Lithium-Ion Battery Thermal Abuse Behavior Using Experimental and Computational Analysis

Carlos F. Lopez et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Electrochemistry

In Situ Solid State 7Li NMR Observations of Lithium Metal Deposition during Overcharge in Lithium Ion Batteries

J. Arai et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Electrochemistry

Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules

Carlos F. Lopez et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection
Article Electrochemistry

Observation of Lithium Dendrites at Ambient Temperature and Below

Corey T. Love et al.

ECS ELECTROCHEMISTRY LETTERS (2015)

Add to Collection
Article Biochemistry & Molecular Biology

High Temperature Stable Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar Gum

Diogo Vieira Carvalho et al.

MEMBRANES (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Fabrication of Graphene Embedded LiFePO4 Using a Catalyst Assisted Self Assembly Method as a Cathode Material for High Power Lithium-Ion Batteries

WonKeun Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection
Article Thermodynamics

Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery

Thanh-Ha Tran et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection
Article Chemistry, Physical

Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material

Z. G. Qu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Add to Collection
Article Chemistry, Physical

Characterization of large format lithium ion battery exposed to extremely high temperature

Xuning Feng et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Chemistry, Physical

Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions

Wei-Jen Lai et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Chemistry, Physical

Evaluation of mechanical abuse techniques in lithium ion batteries

Joshua Lamb et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Chemistry, Physical

Failure analysis of pinch torsion tests as a thermal runaway risk evaluation method of Li-ion cells

Yuzhi Xia et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection
Article Electrochemistry

Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells

Fredrik Larsson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection
Article Chemistry, Physical

A New High Power LiNi0.81Co0.1Al0.09O2 Cathode Material for Lithium-Ion Batteries

Minki Jo et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection
Article Chemistry, Physical

The composite electrode of LiFePO4 cathode materials modified with exfoliated graphene from expanded graphite for high power Li-ion batteries

Tiefeng Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection
Article Chemistry, Inorganic & Nuclear

Comparative Issues of Cathode Materials for Li-Ion Batteries

Christian M. Julien et al.

INORGANICS (2014)

Add to Collection
Article Chemistry, Physical

Computational models for simulations of lithium-ion battery cells under constrained compression tests

Mohammed Yusuf Ali et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection
Article Chemistry, Physical

Highly conductive three-dimensional graphene for enhancing the rate performance of LiFePO4 cathode

Yufeng Tang et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Chemistry, Physical

Enhanced thermal safety and high power performance of carbon-coated LiFePO4 olivine cathode for Li-ion batteries

K. Zaghib et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Review Chemistry, Physical

Thermal runaway caused fire and explosion of lithium ion battery

Qingsong Wang et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Chemistry, Physical

Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells

Lars Greve et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Chemistry, Physical

Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity

Elham Sahraei et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection
Article Electrochemistry

The Role of Separators in Lithium-Ion Cell Safety

Christopher J. Orendorff

ELECTROCHEMICAL SOCIETY INTERFACE (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Temperature-sensitive cathode materials for safer lithium-ion batteries

Lan Xia et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection
Article Chemistry, Physical

Graphene modified LiFePO4 cathode materials for high power lithium ion batteries

Xufeng Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection
Article Chemistry, Physical

An inorganic membrane as a separator for lithium-ion battery

Hongfa Xiang et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Chemistry, Physical

Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity

Rajib Mahamud et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Chemistry, Physical

Design optimization of electric vehicle battery cooling plates for thermal performance

Anthony Jarrett et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection
Article Electrochemistry

On the Thermal Stability of Olivine Cathode Materials for Lithium-Ion Batteries

Surendra K. Martha et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection
Article Electrochemistry

Impact of Al or Mg substitution on the Thermal Stability of Li(1.05)Mn(1.95-z)MzO(4) (M=Al or Mg)

Fu Zhou et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection
Review Electrochemistry

Redox shuttles for safer lithium-ion batteries

Zonghai Chen et al.

ELECTROCHIMICA ACTA (2009)

Add to Collection
Article Chemistry, Physical

Internal short circuit in Li-ion cells

Hossein Maleki et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection
Article Chemistry, Physical

The importance of heat evolution during the overcharge process and the protection mechanism of electrolyte additives for prismatic lithium ion batteries

Yi-Shiun Chen et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection
Article Chemistry, Physical

Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution

Rami Sabbah et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection
Article Chemistry, Physical

Relation between composition of the positive electrode and cell performance and safety of lithium-ion PTC batteries

Makiko Kise et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection
Article Chemistry, Physical

Effect of carbon coating on LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries

Hyun-Soo Kim et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection
Review Chemistry, Physical

A review on the separators of liquid electrolyte Li-ion batteries

Sheng Shui Zhang

JOURNAL OF POWER SOURCES (2007)

Add to Collection
Article Electrochemistry

Thermal stability of delithiated LiMn2O4 with electrolyte for lithium-ion batteries

Qingsong Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection
Review Chemistry, Physical

A review on electrolyte additives for lithium-ion batteries

Sheng Shui Zhang

JOURNAL OF POWER SOURCES (2006)

Add to Collection
Article Chemistry, Physical

Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation

SA Khateeb et al.

JOURNAL OF POWER SOURCES (2005)

Add to Collection
Article Electrochemistry

Effect of the addition of conductive material to positive temperature coefficient cathodes of lithium-ion batteries

M Kise et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection
Article Electrochemistry

A positive-temperature-coefficient electrode with thermal cut-off mechanism for use in rechargeable lithium batteries

XM Feng et al.

ELECTROCHEMISTRY COMMUNICATIONS (2004)

Add to Collection
Article Chemistry, Physical

Heat dissipation design for lithium-ion batteries

MS Wu et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection
Article Chemistry, Physical

Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells

T Kawamura et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection
Article Chemistry, Physical

Thermal stability of LiPF6-EC:EMC electrolyte for lithium ion batteries

GG Botte et al.

JOURNAL OF POWER SOURCES (2001)

Add to Collection
Article Chemistry, Physical

A study of the overcharge reaction of lithium-ion batteries

RA Leising et al.

JOURNAL OF POWER SOURCES (2001)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.