4.7 Review

Application of bio-based phase change materials for effective heat management

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Assessing the direct interaction of asphalt binder with stearic acid/palmitic acid binary eutectic phase change material

Jiasheng Dai et al.

Summary: This study investigates the direct interaction between asphalt and the stearic acid/palmitic acid binary eutectic phase change material (SA/ PA-PCM) and its impact on the performance of asphalt. The results show that incorporating SA/PA-PCM improves the high-temperature rutting resistance and low-temperature cracking resistance of asphalt while increasing the specific heat capacity of the binder. However, liquefied SA/PA-PCM results in a loss of elasticity and viscosity in the modified binders.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Thermodynamics

Effect of modified diatomite based shape-stabilized phase change materials on multiphysics characteristics of thermal storage mortar

Miao Ren et al.

Summary: A new product was developed by incorporating SSPCMs into mortar, which showed improved performance. The addition of SSPCMs into cement-based materials resulted in significant reductions in 28-day compressive strength and thermal conductivity, while also enhancing temperature regulation properties of the cement-based materials.

ENERGY (2022)

Review Energy & Fuels

Strategies to reduce the flammability of organic phase change Materials: A review

Zhuang Mao Png et al.

Summary: Organic Phase Change Materials (oPCMs) are widely used in regulating temperature changes, but their flammability remains a major challenge. Various methods such as adding flame retardants, chemical transformations, and surface coating can be used to reduce the flammability. Future research directions include enhancing flame retardant properties through synergistic flame retardants and chemical modifications.

SOLAR ENERGY (2022)

Article Energy & Fuels

Experimental investigation of shellac wax as potential bio-phase change material for medium temperature solar thermal energy storage applications

B. V. Rudra Murthy et al.

Summary: The thermal performance of shellac wax as a novel bio-phase change material and Therminol (R)-55 as a heat transfer fluid in a vertical shell and tube latent heat thermal energy storage unit was experimentally analyzed. The results showed that shellac wax had high storage efficiency and reduction in melting time, making it suitable for medium temperature solar thermal applications.

SOLAR ENERGY (2022)

Review Energy & Fuels

Review on the preparation and performance of paraffin-based phase change microcapsules for heat storage

Zhijuan Chang et al.

Summary: This article reviews the advantages and disadvantages of microencapsulated phase change materials and focuses on the enhancement of thermal conductivity. It also highlights the current problems and solutions in the research field.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

Acidic functionalized graphene dispersed polyethylene glycol nano-phase change material for the active cooling of a simulated heat-generating electronic system

Vishnuprasad Selvaraj et al.

Summary: This study investigates the thermal performance of acidic functionalized graphene dispersed polyethylene glycol nano-phase change material in a simulated electronic cooling system. Results show improved latent heat capacity and thermal conductivity, leading to decreased core temperatures in electronic systems compared to traditional cooling methods. This innovative material shows promise for thermal management applications.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

A novel composite phase change material from lauric acid, nano-Cu and attapulgite: Preparation, characterization and thermal conductivity enhancement

Ruilong Wen et al.

Summary: A novel composite phase change material of lauric acid@Cu/Attapulgite was prepared to overcome the limitations of liquid phase leakage and low thermal conductivity. The composite PCM exhibited good thermal stability and thermal reliability, and the thermal conductivity was synergistically enhanced by Nano-Cu and attapulgite. It has potential application in energy conservation of buildings.

JOURNAL OF ENERGY STORAGE (2022)

Article Thermodynamics

Capric-stearic acid mixture impregnated carbonized waste sugar beet pulp as leak-resistive composite phase change material with effective thermal conductivity and thermal energy storage performance

Ahmet Sari et al.

Summary: The present investigation focuses on developing a potential composite phase change material (PCM) with leak-resistive and high thermal conductivity. By carbonizing sugar beet pulp, a porous framework is created and physically integrated with the capric-stearic acid eutectic mixture (CSEM) to enhance the thermal conductivity and leak resistance of the composite material.

ENERGY (2022)

Article Thermodynamics

Preparation and thermal properties of palmitic acid @ZnO/Expanded graphite composite phase change material for heat storage

Kai Wang et al.

Summary: A novel palmitic acid composite phase change material with excellent thermal properties and stability was developed, showing great potential in heat storage applications.

ENERGY (2022)

Article Construction & Building Technology

Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance

Osman Gencel et al.

Summary: The efficiency of solar thermal energy in cementitious mortar is enhanced by using a phase change material (PCM) with thermal energy harvesting/releasing ability. A new type of cement-based thermal energy storage mortar (CBTESM) was developed by substituting blast furnace slag (BFS)/capric acid (CA) shape-stabilized PCM (SSPCM) with varying amounts of sand. The results showed that the addition of BFS did not affect the crystalline structure of CA, and successful impregnation of melted CA into BFS was confirmed. The CBTESM samples with SSPCM additives exhibited decreased bulk density, compressive strength, and thermal conductivity. The addition of 15% SSPCM was found to meet the standard conditions in terms of compressive strength. The developed CBTESM significantly reduced indoor temperature and showed potential for energy savings and carbon emission reduction.

ENERGY AND BUILDINGS (2022)

Article Thermodynamics

Multilayer assembly of phase change material and bio-based concrete: A passive envelope to improve the energy and hygrothermal performance of buildings

Dongxia Wu et al.

Summary: This study proposes a passive envelope solution that integrates phase change materials (PCMs) and hemp concrete to improve the energy, thermal, and hygric performances of buildings. The results highlight the significant role of moisture transfer and the valuable effect of the integrated envelope on improving both energy and hygrothermal performance.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Chemistry, Physical

Study of the nano-encapsulated vitamin D3 in the bio-based phase change material: Synthesis and characteristics

Behrouz Mohammadi et al.

Summary: The nanocapsulation of vitamin D3 in bio-based phase change material (PCM) was investigated for thermo-sensitive drug delivery applications. The study successfully demonstrated the applicability and efficiency of the nanocapsulation method, with good stability of the produced nanocapsules.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Energy & Fuels

A comparative study of various fatty acids as phase change material to enhance the freshwater productivity of solar still

Jyotin Kateshia et al.

Summary: The scarcity of potable water has become an impending crisis due to population growth, industrialization, and continuous groundwater extraction. Solar desalination using a solar still with phase change material (PCM) storage is a low-cost method to generate freshwater. This study conducted experimental, energy, exergy, and economic analysis on a conventional solar still and solar stills using different types of fatty acids as PCM storage with pin fins for enhanced heat transfer. The results showed that the solar still with stearic acid and pin fins had the highest economic efficiency among all cases.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Multidisciplinary

Thermal Properties and Reliabilities of Lauric Acid-Based Binary Eutectic Fatty Acid as a Phase Change Material for Building Energy Conservation

Zhixuan Fan et al.

Summary: Thermal properties, stability, and reliability of lauric acid-based binary eutectic mixtures for building energy efficiency were studied. The experimental results were close to the theoretical results, and no new functional groups were produced during the preparation process, as confirmed by FT-IR and XRD investigations. TG analysis showed excellent thermal stability for the eutectic PCMs. Additionally, the lauric acid-based binary eutectic PCMs maintained their excellent thermal properties and chemical structure after 500 hot and cold cycles.

ACS OMEGA (2022)

Article Thermodynamics

Investigation on thermal properties enhancement of lauryl alcohol with multi-walled carbon nanotubes as phase change material for thermal energy storage

Veerakumar Chinnasamy et al.

Summary: This study investigates the enhancement of thermal properties of lauryl alcohol using multi-walled carbon nanotubes (MWCNTs) as nanoparticle additive. The addition of MWCNTs significantly increases the thermal conductivity of lauryl alcohol. The concentration of nanoparticles affects other properties such as latent heat and degree of supercooling.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Energy & Fuels

Preparation and thermal properties analysis of fatty acids/1-hexadecanol binary eutectic phase change materials reinforced with TiO2 particles

Ruiqi Zhang et al.

Summary: This paper investigates binary eutectic mixtures (EMs) using fatty acids and 1-hexadecanol, and composite phase change materials (CPCMs) formed by adding titanium dioxide (TiO2). The results show that the CPCMs have high latent heat, high thermal conductivity, and good thermal stability and reliability.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

PCM products and their fields of application - An overview of the state in 2020/2021

Harald Mehling et al.

Summary: Phase Change Materials (PCM) have been widely applied in various commercial products and demonstrate significant potential in many fields.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Physical

Eutectic Fatty Acids Phase Change Materials Improved with Expanded Graphite

Zanshe Wang et al.

Summary: This study developed a composite eutectic fatty acid system based on phase change materials, which can improve heat recovery. The experimental results showed that the composite PCMs with an appropriate amount of expanded graphite had stable phase transition temperature and latent heat, and higher thermal conductivity and thermal diffusion coefficient. In the prepared heat reservoir, the best heat storage and heat release performance were achieved when the ratio of expanded graphite was 10%.

MATERIALS (2022)

Article Energy & Fuels

Thermo-physical studies and corrosion analysis of caprylic acid-cetyl alcohol binary mixture as novel phase change material for refrigeration systems

Hamza Ayaz et al.

Summary: This study aims to prepare a stable binary mixture of CA and CAL as a solid-liquid phase change material with a phase transition temperature suitable for chilled refrigeration. The study evaluates the thermo-physical properties, thermal reliability, and corrosion resistance of the binary mixture. The results show that the CA-CAL binary mixture at an 85:15 molar mass ratio is suitable for medium-range refrigeration applications.

ENERGY REPORTS (2022)

Article Energy & Fuels

Experimental study of the thermal properties of a fatty acid-modified graphite composite phase change material dispersion system

Guihua Fang et al.

Summary: In this study, modified graphite (MEG) was synthesized and used as a heat conduction additive in a fatty acid composite phase change material (PCM). The results showed that the addition of MEG significantly improved the thermal conductivity of the composite PCM. Furthermore, the composite exhibited good dispersion stability and thermal cycling stability.

JOURNAL OF ENERGY STORAGE (2022)

Review Energy & Fuels

A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications

Khaireldin Faraj et al.

Summary: Research on thermal energy storage, particularly phase change materials like PCMs, is crucial for improving energy efficiency and maintaining thermal comfort in buildings. Current studies focus on the effectiveness of PCM in building heating applications and the significance of PCM system hybridization, while further experimental investigations and optimization of hybrid systems are still needed.

JOURNAL OF ENERGY STORAGE (2021)

Article Engineering, Manufacturing

Bio-based flexible phase change composite film with high thermal conductivity for thermal energy storage

Yufang He et al.

Summary: A shape-stabilized and flexible phase change film based on PEG was prepared in this study, with improved thermal conductivity by the co-operation of CNF and EG, and enhanced by the addition of BN. The film demonstrated high thermal conductivity and stable phase change enthalpy, making it suitable for thermal management and energy storage in modern electronic devices.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Energy & Fuels

Investigation and properties of a novel composite bio-PCM to reduce summer energy consumptions in buildings of hot and dry climates

Lisa Boussaba et al.

Summary: The study developed a novel composite bio-PCM for enhancing thermal comfort in building indoor environments. Testing showed that the composite is thermally and chemically stable, with slightly reduced compressive strength but still suitable for non-structural building applications. The research indicates that this homemade PCM panel could be a potential candidate for use in buildings located in hot and dry climates.

SOLAR ENERGY (2021)

Article Energy & Fuels

Transient heat transfer analysis of phase change material melting in metal foam by experimental study and artificial neural network

Juan Duan et al.

Summary: Studies show that the porosity of metal foam has a greater influence on the melting and heat transfer of PCM than the pore density. The experimental results are used to train an ANN model that predicts various parameters of the PCM-porous system during the heat transfer process, and a classification ANN model is developed to predict the porosity of metal foam based on different variables.

JOURNAL OF ENERGY STORAGE (2021)

Review Biochemistry & Molecular Biology

Organic Phase Change Materials for Thermal Energy Storage: Influence of Molecular Structure on Properties

Samer Kahwaji et al.

Summary: Phase change materials can store thermal energy with energy densities comparable to batteries, playing a crucial role in reducing greenhouse gas emissions. Compounds with even chain alkyl lengths generally have higher melting temperatures, store more thermal energy per unit mass, and are lower in cost compared to compounds with odd alkyl chains, according to the research.

MOLECULES (2021)

Article Biochemistry & Molecular Biology

Degradation of Fatty Acid Phase-Change Materials (PCM): New Approach for Its Characterization

Marc Majo et al.

Summary: The study examines the degradation of capric and myristic acids under different thermal treatments, showing a 6.6% decrease in melting enthalpy for capric acid after 500 hours of thermal treatment. Evidence of chemical degradation was found which may explain the decrease in thermophysical properties during use.

MOLECULES (2021)

Article Energy & Fuels

Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties

Gokhan Hekimoglu et al.

Summary: Two types of bio-carbons were developed from walnut shell, serving as shape stabilizer and thermal conductivity enhancer for phase change materials in thermal controlling applications. The bio-carbons showed impressive performance in preventing leakage of phase change materials and increasing thermal conductivity.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Enhanced thermal properties of stearic acid/carbonized maize straw composite phase change material for thermal energy storage in buildings

Ruilong Wen et al.

Summary: This study successfully prepared a composite phase change material of stearic acid/carbonized maize straw with good thermal properties and stability, using carbonized maize straw as a supporting material with excellent thermal conductivity. The composite PCM showed enhanced thermal conductivity and stability, with significant improvements in melting and freezing times compared to pure stearic acid.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Experimental and model validation of a phase change material heat exchanger integrated into a real building

Gabriele Triscari et al.

Summary: Latent heat thermal energy storages (LHTES) are a promising technology with a wide range of applications, but the challenge lies in balancing thermal performance and material costs. The use of finned tube heat exchangers is the best solution to enhance thermal performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Energy & Fuels

Phase change materials in solar photovoltaics applied in buildings: An overview

Omid Mahian et al.

Summary: The building sector accounts for approximately 40% of global carbon dioxide emissions. Integrating photovoltaic modules with phase change materials in buildings can provide thermal regulation and energy storage. Research on photovoltaic-phase change material systems in buildings has grown significantly in the past two decades and a systematic review of current knowledge in this area could greatly benefit future research.

SOLAR ENERGY (2021)

Review Chemistry, Physical

Recent advances in using nanofluids in renewable energy systems and the environmental implications of their uptake

Omid Mahian et al.

Summary: Nanofluids, mixtures of common liquids and solid nanoparticles with enhanced thermal and optical properties, have been studied for over two decades despite barriers to commercial adoption. Research has focused on the effects of adding nanoparticles on the thermal efficiency and emission reductions in renewable energy systems, particularly in solar systems.

NANO ENERGY (2021)

Article Energy & Fuels

Experimental Study on the Use of Enhanced Coconut Oil and Paraffin Wax Phase Change Material in Active Heating Using Advanced Modular Prototype

Khaireldin Faraj et al.

Summary: The study shows that coupling coconut oil-based PCM with systems can achieve load shifting and energy savings, but the effectiveness is affected by control methods, weather conditions, electricity tariff policies, as well as PCM positioning and types.

JOURNAL OF ENERGY STORAGE (2021)

Article Energy & Fuels

Multicomponent bio-based fatty acids system as phase change material for low temperature energy storage

Meysam Nazari et al.

Summary: New multicomponent mixtures of fatty acids for low temperature thermal energy storage applications were developed in this study. The mixtures showed stable thermal behavior within the range of human comfort temperatures, with specific heat and enthalpy values suitable for thermal energy storage. Among the developed combinations, the LA/CoFA (20/80) mixture exhibited distinguished performance and potential for low temperature thermal energy storage applications.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Multidisciplinary

A Low-Temperature Phase Change Material Based on Capric-Stearic Acid/Expanded Graphite for Thermal Energy Storage

Shangxiao Liu et al.

Summary: The study showed that the CA-SA/10 wt % EG composite PCM demonstrated good thermal conductivity and stability, maintaining good thermal reliability even after 500 thermal cycles.

ACS OMEGA (2021)

Article Chemistry, Multidisciplinary

Preparation and Energy Storage Properties of a Lauric acid/Octadecanol Eutectic Mixture

Jingtao Liu et al.

Summary: This paper investigates the application of a binary eutectic mixture in solar buildings, determining its thermal properties through theoretical calculations and experimental tests, showcasing its potential in the field of energy-saving buildings.

ACS OMEGA (2021)

Article Energy & Fuels

Experimental study on a binary mixture ratio of fatty acid-based PCM integrated to PV panel for thermal regulation on a hot and cold month

P. Prasannaa et al.

Summary: The study demonstrated the thermal regulation of photovoltaic panels by integrating PCM units of different thickness, showing a significant increase in performance ratio and efficiency with the addition of 30 mm and 50 mm PCM panels compared to reference panels.

INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY (2021)

Review Polymer Science

A review on Polymeric-Based Phase Change Material for Thermo-Regulating Fabric Application

Deepak G. Prajapati et al.

POLYMER REVIEWS (2020)

Article Green & Sustainable Science & Technology

Potential of water natural circulation coupled with nano-enhanced PCM for PV module cooling

Nasrin Abdollahi et al.

RENEWABLE ENERGY (2020)

Article Construction & Building Technology

Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function

Seunghwan Wi et al.

SUSTAINABLE CITIES AND SOCIETY (2020)

Article Materials Science, Multidisciplinary

Caprylic acid based PCM composite with potential for thermal buffering and packaging applications

Jagadeeswara Reddy Vennapusa et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Review Green & Sustainable Science & Technology

A review on recent developments in thermal performance enhancement methods of flat plate solar air collector

Elumalai Vengadesan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Thermodynamics

HARNESSING AND STORING SOLAR THERMAL ENERGY USING PHASE CHANGE MATERIAL (PCM) IN A SMALL FLAT PLATE COLLECTOR

Sathish K. Gurupatham et al.

JOURNAL OF THERMAL ENGINEERING (2020)

Article Thermodynamics

Development and thermal characteristics of a novel composite oleic acid for cold storage

L. Jiang et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2019)

Article Chemistry, Multidisciplinary

Edible Oils as Practical Phase Change Materials for Thermal Energy Storage

Samer Kahwaji et al.

APPLIED SCIENCES-BASEL (2019)

Article Thermodynamics

Analysis of underfloor electrical heating system integrated with coconut oil-PCM plates

Khaireldin Faraj et al.

APPLIED THERMAL ENGINEERING (2019)

Review Energy & Fuels

Applications of cascaded phase change materials in solar water collector storage tanks: A review

Mohamed E. Zayed et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Construction & Building Technology

vegetable fat: A low-cost bio-based phase change material for thermal energy storage in buildings

Lisa Boussaba et al.

JOURNAL OF BUILDING ENGINEERING (2019)

Article Thermodynamics

A comparative study on battery thermal management using phase change material (PCM)

Ashima Verma et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

Article Thermodynamics

Parametric analysis and optimization of an underfloor solar assisted heating system with phase change materials

Maria T. Plytaria et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

Review Materials Science, Multidisciplinary

Latent Heat Thermal Energy Storage Systems with Solid-Liquid Phase Change Materials: A Review

Nan Zhang et al.

ADVANCED ENGINEERING MATERIALS (2018)

Article Construction & Building Technology

Elaboration and properties of a composite bio-based PCM for an application in building envelopes

Lisa Boussaba et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Nano-PCM filled energy storage system for solar-thermal applications

Manar Al-Jethelah et al.

RENEWABLE ENERGY (2018)

Article Green & Sustainable Science & Technology

Experimental investigation on performance comparison of PV/T-PCM system and PV/T system

Xiaojiao Yang et al.

RENEWABLE ENERGY (2018)

Article Chemistry, Physical

Combining biocatalysts to achieve new phase change materials. Application to non-edible animal fat

Pau Gallart-Sirvent et al.

MOLECULAR CATALYSIS (2018)

Article Thermodynamics

Experimental investigation on paraffin wax integrated with copper foam based heat sinks for electronic components thermal cooling

Tauseef-ur-Rehman et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Construction & Building Technology

Free cooling potential of a PCM-based heat exchanger coupled with a novel HVAC system for simultaneous heating and cooling of buildings

Alessandro Maccarini et al.

SUSTAINABLE CITIES AND SOCIETY (2018)

Article Chemistry, Physical

Thermal Storage Capacity and Night Ventilation Performance of a Solar Chimney Combined with Different PCMs

Jun Lu et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2017)

Article Thermodynamics

24-hour cooling of a building by a PCM-integrated adsorption system

Amin Haghighi Poshtiri et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2017)

Review Green & Sustainable Science & Technology

A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties

Yanio E. Milian et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Green & Sustainable Science & Technology

Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review

Nasiru I. Ibrahim et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Proceedings Paper Green & Sustainable Science & Technology

Thermal performance of an office cubicle integrated with a bio-based PCM: Experimental analyses

Tor A. Vik et al.

8TH INTERNATIONAL CONFERENCE ON SUSTAINABILITY IN ENERGY AND BUILDINGS, SEB-16 (2017)

Review Green & Sustainable Science & Technology

A review on phase change material (PCM) for sustainable passive cooling in building envelopes

Hussein Akeiber et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Energy & Fuels

Heat retention of a photovoltaic/thermal collector with PCM

Maria C. Browne et al.

SOLAR ENERGY (2016)

Article Construction & Building Technology

Thermal cycle test of binary mixtures of some fatty acids as phase change materials for building applications

Atul Sharma et al.

ENERGY AND BUILDINGS (2015)

Article Construction & Building Technology

Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials

Kemal Cellat et al.

ENERGY AND BUILDINGS (2015)

Article Construction & Building Technology

Integration of PCM in domestic hot water tanks: Optimization for shifting peak demand

Arman Najafian et al.

ENERGY AND BUILDINGS (2015)

Review Construction & Building Technology

Phase change materials and products for building applications: A state-of-the-art review and future research opportunities

Simen Edsjo Kalnaes et al.

ENERGY AND BUILDINGS (2015)

Review Thermodynamics

Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs

Shuli Liu et al.

HEAT TRANSFER ENGINEERING (2015)

Article Engineering, Environmental

Life cycle assessment of two biologically produced phase change materials and their related products

John A. Noeel et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2015)

Proceedings Paper Construction & Building Technology

Indoor characterisation of a photovoltaic/thermal phase change material system

Maria C. Browne et al.

INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY, SHC 2014 (2015)

Article Thermodynamics

Thermal performance evaluation of Bio-based shape stabilized PCM with boron nitride for energy saving

Su-Gwang Jeong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

Thermal conductivity and heat transfer performance enhancement of phase change materials (PCM) containing carbon additives for heat storage application

Da Hee Choi et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2014)

Review Green & Sustainable Science & Technology

Fatty acids as phase change materials: A review

Yanping Yuan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Review Materials Science, Multidisciplinary

Phase change materials for thermal energy storage

Kinga Pielichowska et al.

PROGRESS IN MATERIALS SCIENCE (2014)

Article Thermodynamics

Optimal preparation of PCM/diatomite composites for enhancing thermal properties

Su-Gwang Jeong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Article Energy & Fuels

Improvement of the thermal properties of Bio-based PCM using exfoliated graphite nanoplatelets

Su-Gwang Jeong et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)

Article Energy & Fuels

Field Experiments of PV-Thermal Collectors for Residential Application in Bangkok

Thipjak Nualboonrueng et al.

ENERGIES (2012)

Review Thermodynamics

Organic phase change materials and their textile applications: An overview

Nihal Sarier et al.

THERMOCHIMICA ACTA (2012)

Article Thermodynamics

Thermal properties of lauric acid/1-tetradecanol binary system for energy storage

Jianguo Zuo et al.

APPLIED THERMAL ENGINEERING (2011)

Article Construction & Building Technology

Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage

Yi Wang et al.

ENERGY AND BUILDINGS (2011)

Article Construction & Building Technology

Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material

Shuangmao Wu et al.

ENERGY AND BUILDINGS (2011)

Article Construction & Building Technology

Thermal performance of caprylic acid/1-dodecanol eutectic mixture as phase change material (PCM)

Jianguo Zuo et al.

ENERGY AND BUILDINGS (2011)

Review Chemistry, Applied

Improvement in poly(lactic acid) fabric performance via hydrophilic coating

Akbar Khoddami et al.

PROGRESS IN ORGANIC COATINGS (2011)

Review Construction & Building Technology

Phase change materials for building applications: A state-of-the-art review

Ruben Baetens et al.

ENERGY AND BUILDINGS (2010)

Article Energy & Fuels

Latent heat characteristics of biobased oleochemical carbonates as potential phase change materials

James A. Kenar

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)

Review Green & Sustainable Science & Technology

Review on thermal energy storage with phase change materials and applications

Atul Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

Article Green & Sustainable Science & Technology

Utilization of phase change materials in solar domestic hot water systems

Muhsin Mazman et al.

RENEWABLE ENERGY (2009)

Article Energy & Fuels

Analysis of PV/T flat plate water collectors connected in series

Swapnil Dubey et al.

SOLAR ENERGY (2009)

Article Green & Sustainable Science & Technology

Capric-myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage

Ali Karaipekli et al.

RENEWABLE ENERGY (2008)

Review Green & Sustainable Science & Technology

Solar energy storage using phase change materials

Murat Kenisarin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)

Article Green & Sustainable Science & Technology

Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications

Ali Karaipekli et al.

RENEWABLE ENERGY (2007)

Article Construction & Building Technology

Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage

L Shilei et al.

ENERGY AND BUILDINGS (2006)

Article Construction & Building Technology

Impact of phase change wall room on indoor thermal environment in winter

L Shilei et al.

ENERGY AND BUILDINGS (2006)

Article Thermodynamics

Fatty acids as phase change materials (PCMs) for thermal energy storage: A review

D Rozanna et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2004)

Article Thermodynamics

Thermal performance of palmitic acid as a phase change energy storage material

A Sari et al.

ENERGY CONVERSION AND MANAGEMENT (2002)

Article Green & Sustainable Science & Technology

Thermal performance of myristic acid as a phase change material for energy storage application

A Sari et al.

RENEWABLE ENERGY (2001)