4.7 Article

Rapid synthesis of nickel-copper phosphate electrode by microwave-assisted hydrothermal reaction for supercapattery

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Flexible Scintillation Silica Fiber with Engineered Nanocrystals for Remote Real-Time X-ray Detection

Ming Jia et al.

Summary: By controlling the diffusion concentration of SiO2 in the fiber core region, an YPS nanocrystal phase with an average size of approximately 38 nm was successfully obtained. Both Ce3+ and Tb3+ ions were embedded into YPS nanocrystals, enhancing energy transfer efficiency and brighter green light emission.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Materials Science, Coatings & Films

Fabrication of binary metal phosphate-based binder-free electrode for new generation energy storage device

Yu Yi How et al.

Summary: This study aims to optimize the fabrication parameters of NiFe-P electrode for high areal capacity in supercapattery. The study uses a one-step hydrothermal synthesis method and central composite design (CCD) to optimize the performance. The optimized electrode shows high specific capacity and excellent stability.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Insights into corrosion resistance enhancement of nickel-phosphorus metallic glass in acid environment by the incorporation of copper

Jie Chen et al.

Summary: The study found that the cluster size in the Ni-Cu-P amorphous coating initially decreased and then increased with an increase in Cu content. Amorphous coatings with relatively smaller ordered clusters showed better corrosion resistance. In 5 wt% H2SO4 solution, a compact phosphate and hypophosphate passive film was generated on the Ni-Cu-P coating with n-type semiconductor characteristics.

VACUUM (2022)

Article Polymer Science

The Effects of Electron Beam Irradiation on the Morphological and Physicochemical Properties of Magnesium-Doped Hydroxyapatite/Chitosan Composite Coatings

Bogdan Bita et al.

Summary: This study investigated the influence of electron beam radiation on magnesium-doped hydroxyapatite/chitosan composite coatings. The results showed that the radiation caused the surface of the coatings to become nanostructured and partial detachment of the irradiated layers from the substrates. The distribution of chemical elements in the samples was found to depend on the radiation dose, but the apatite structure and the bonding of magnesium with the phosphate groups remained unchanged.

POLYMERS (2022)

Review Energy & Fuels

Supercapattery: Merging of battery-supercapacitor electrodes for hybrid energy storage devices

Muhammad Zahir Iqbal et al.

Summary: Supercapattery devices have attracted attention for their high specific energy without compromising specific power, and utilizes advanced materials for improved performance. However, challenges remain in increasing energy density without affecting power density.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Physical

Nickel-cobalt phosphate nanoparticle-layer shielded in-situ grown copper-nickel molybdate nanosheets for electrochemical energy storage

Bhimanaboina Ramulu et al.

Summary: Transition metal molybdates and phosphates have attracted attention as prominent electroactive materials for energy storage devices due to their high theoretical capacity, multiple valence states, good electrical conductivity, and natural abundance. The in-situ grown copper-nickel molybdate electrode exhibited superior areal capacity and advanced morphological features, showing potential for practical applications in energy storage devices. Additionally, the CoNiP@CuNiMo-9/CF composite material displayed enhanced areal capacity and the hybrid cell assembled with it showed high energy and power densities with good cycling stability.

ENERGY STORAGE MATERIALS (2022)

Article Electrochemistry

In-situ transformation constructs CoTe/Co/CoO nanosheet arrays with rich grain boundaries to enhance electrochemical performance

Mingyue Chen et al.

Summary: In this study, CoTe/Co/CoO composite nanosheet arrays were prepared by hydrothermal process using Co(OH)2 nanosheet arrays as precursors. The abundance of grain boundaries in the nanosheets, as a result of the multi-component effect, combined with the high elasticity of amorphous CoO and the high conductivity of CoTe and Co, contribute to the excellent electrochemical performance of the CoTe/Co/CoO composite nanosheet arrays.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Physical

Honeycomb-like Ni-Mo-S on Ni foam as superior bifunctional electrocatalyst for hydrogen evolution and urea oxidation

Fangfang Wang et al.

Summary: The study presents a simple and feasible approach of electrochemical deposition to construct robust and highly-active electrocatalysts for hydrogen production. The as-deposited honeycomb-like nickel-molybdenum-sulfur amorphous microstructures demonstrated excellent electrocatalytic activity for hydrogen evolution reaction and urea oxidation reaction.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Multidisciplinary

Corrosion engineering boosting bulk Fe50Mn30Co10Cr10 high-entropy alloy as high-efficient alkaline oxygen evolution reaction electrocatalyst

Pengfei Zhou et al.

Summary: This study reports the use of 3D-printed Fe50Mn30Co10Cr10 as an electrocatalyst for OER. A corrosion engineering approach is adopted to create nanostructured active layers, resulting in high OER performance. The excellent catalytic activity is attributed to the self-supported honeycomb nanostructures, multi-component hydroxides, and diverse valence states for multiple active sites.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Energy & Fuels

Facile synthesis of a binary composite from watermelon rind using response surface methodology for supercapacitor electrode material

Nurizan Omar et al.

Summary: This study reports a novel binary composite material BCWR derived from watermelon rind, which can serve as an electrode for supercapacitors, and optimized the synthesis process parameters such as pyrolysis temperature, pyrolysis time, and biomass to metal oxide ratio. The experimental validation shows that BCWR has the potential to be a superior electrode material for energy storage applications.

JOURNAL OF ENERGY STORAGE (2022)

Article Electrochemistry

The rational investigation of bimetallic selenides as electrode materials for hybrid supercapacitors

Kiran Kumar Garlapati et al.

Summary: This study investigates the potential of nickel-copper selenide as a replacement for nickel-cobalt selenide electrodes in energy storage devices. The results show that nickel-copper selenide exhibits more stable charge storage at high current densities, and aqueous hybrid supercapacitors using nickel-copper selenide//modified activated carbon and nickel-cobalt selenide//modified activated carbon demonstrate good performance in terms of energy and power density.

ELECTROCHIMICA ACTA (2022)

Article Energy & Fuels

Hydrothermally synthesized nickel copper phosphate thin film cathodes for high-performance hybrid supercapacitor devices

Sachin S. Pujari et al.

Summary: Transition metal phosphate-based materials possess excellent conductivity and rich redox activity. Nickel-copper phosphate thin films without binders were grown directly on stainless steel substrates through hydrothermal method, showing morphological changes with increasing copper content. The optimal nickel-copper ratio demonstrated high specific capacitance. Moreover, hybrid aqueous supercapacitor and all-solid-state supercapacitor electrochemical energy storage devices exhibited superior performance and long-term durability.

JOURNAL OF ENERGY STORAGE (2022)

Article Chemistry, Analytical

Marigold flower-like Sn3O4 nanostructures as efficient battery-type electrode material for high-performing asymmetric supercapacitors

Mohan Reddy Pallavolu et al.

Summary: The hydrothermally synthesized Sn3O4 flower-type nanostructure exhibits high electrochemical activity and charge storage in supercapacitors, and when combined with activated carbon in an asymmetric device, it shows promising performance.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

Article Energy & Fuels

Nickel selenide nanorod arrays as an electrode material for lithium-ion batteries and supercapacitors

Samah M. Bekhit et al.

Summary: This study successfully synthesized nickel selenide nanorod arrays grown on nickel foam via a one-step hydrothermal method. The effects of reaction time on morphology and electrochemical performance were investigated. The results show that the optimum reaction time is 18 hours, and the nanorod arrays exhibit unique electrochemical performance as active electrode materials for both lithium-ion batteries and supercapacitors.

JOURNAL OF ENERGY STORAGE (2022)

Article Energy & Fuels

Tailoring crystallinity of 2D cobalt phosphate to introduce pseudocapacitive behavior

Arshid Numan et al.

Summary: The latest technological developments have driven the research on efficient electrochemical energy storage devices. This study investigates the effect of phase transformation on the electrochemical performance of cobalt phosphate through sonochemical synthesis and calcination at different temperatures. The results show that cobalt phosphate calcined at 200 degrees C exhibits excellent electrochemical performance and is suitable for supercapattery fabrication.

JOURNAL OF ENERGY STORAGE (2022)

Review Chemistry, Multidisciplinary

Biopolymer-based electrospun fibers in electrochemical devices: versatile platform for energy, environment, and health monitoring

Seyedeh Nooshin Banitaba et al.

Summary: Electrochemical power tools and sensors are increasingly important in a world reliant on fossil fuels. Electrospun fibers, especially those made from natural polymers, have emerged as promising materials for efficient electrochemical devices. This review provides an overview of natural polymers and their fabrication methods for electrospun fibers, as well as the recent advances in using these fibers in various electrochemical devices. The potential of biopolymer-based electrospun fibers as renewable alternatives to synthetic polymers is also discussed. This review serves as a platform for further research and development in the field of biopolymer-based electrochemical devices.

MATERIALS HORIZONS (2022)

Article Chemistry, Multidisciplinary

Three-dimensional reduced graphene oxide decorated with cobalt metaphosphate as high cost-efficiency electrocatalysts for the hydrogen evolution reaction

Zijie Tang et al.

Summary: In this work, a three-dimensional graphene-supported cobalt metaphosphate material was successfully synthesized through a one-step hydrothermal synthesis method. The obtained material exhibited excellent electrochemical activity for the hydrogen evolution reaction, demonstrating its potential as a non-noble metal electrocatalyst. The study not only provided a convenient preparation technology but also contributed to the development and utilization of high-performance electrocatalysts.

RSC ADVANCES (2022)

Article Energy & Fuels

Tailoring crystallinity of 2D cobalt phosphate to introduce pseudocapacitive behavior

Arshid Numan et al.

Summary: This study synthesized cobalt phosphate (Co-3(PO4)(2)) through sonochemical synthesis followed by calcination at different temperatures, and evaluated the effect of phase transformation on its electrochemical performance. The Co-3(PO4)(2) sample calcined at 200 ?C demonstrated excellent electrochemical performance, making it suitable for supercapattery fabrication.

JOURNAL OF ENERGY STORAGE (2022)

Article Materials Science, Ceramics

Nickel-manganese phosphate: An efficient battery-grade electrode for supercapattery devices

Shahid Alam et al.

Summary: The study investigates the charge storage mechanism of NiMn(PO4)(2) binary metal phosphates synthesized through sono-chemical method. The material shows high Q(s) and excellent cyclic stability in supercapattery devices, exhibiting high specific energy and power. Analysis using Dunn's model and power law reveals the contributions to total capacity and the hybrid nature of the device.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Multidisciplinary

Robust nickel silicate catalysts with high Ni loading for CO2 methanation

Lin Liao et al.

Summary: Efficient and robust nickel silicate catalysts were synthesized in this study, and it was found that the Ni loading plays a critical role in the catalytic performance, with the catalytic performance gradually increasing with the increase of Ni loading.

CHEMISTRY-AN ASIAN JOURNAL (2021)

Article Engineering, Environmental

Ultrathin Cu2P2O7 nanoflakes on stainless steel substrate for flexible symmetric all-solid-state supercapacitors

Akanksha Agarwal et al.

Summary: This study successfully fabricates Cu2P2O7 nanoflakes electrode using the SILAR method, demonstrating excellent capacitance performance and cycling stability. The electrode shows superior specific capacitance and energy density, making it a potential candidate for portable energy storage technologies.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Physics, Applied

A combined laboratory and synchrotron in-situ photoemission study of the rutile TiO2 (110)/water interface

Conor Byrne et al.

Summary: In-situ analysis of the TiO2/water interface using NAP-XPS technique demonstrates the formation of ultra-thin wetting layers of liquid water on a rutile TiO2 surface and chemical changes at the solid/liquid interface. The study also shows that the formed liquid films are likely to be continuous and ultra-thin.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Article Electrochemistry

Optimization of cobalt-manganese binary sulfide for high performance supercapattery devices

Muhammad Zahir Iqbal et al.

Summary: The binary metal sulfide Co0.5Mn0.5S synthesized by sonochemical approach demonstrated excellent electrochemical performance, making it a promising electrode material for high-performance supercapattery applications.

ELECTROCHIMICA ACTA (2021)

Article Electrochemistry

Facile Preparation of Hierarchical Porous Carbon from Orange Peels for High-Performance Supercapacitor

Chun Xu et al.

Summary: This study utilized orange peel as a precursor to synthesize hierarchical porous carbon (HPC) with excellent electrochemical performance, high specific surface area, and long-term stability. The HPC material demonstrated superior capacitance performance compared to typical carbon materials, showing potential for cost-effective activated carbon materials for supercapacitors in energy storage.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2021)

Article Materials Science, Coatings & Films

One-step preparation of cobalt nickel oxide hydroxide@cobalt sulfide heterostructure film on Ni foam through hydrothermal electrodeposition for supercapacitors

Shuo Yu et al.

Summary: A novel route for preparation of NiCo-OH/CoS composite film as an electrode material for supercapacitors was developed, which delivers high specific capacitance and long cycling stability.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Energy & Fuels

Rapid microwave-assisted synthesis of MnCo2O4 nanoflakes as a cathode for battery-supercapacitor hybrid

Syam G. Krishnan et al.

Summary: This study presents a method for rapid and scalable synthesis of MnCo2O4 nanoflakes using microwave-assisted synthesis technique, and characterizes its chemical, surface, and electrochemical properties. It was found that 3M KOH enhanced the specific capacitance of the electrode and provided good cycling stability.

JOURNAL OF ENERGY STORAGE (2021)

Review Energy & Fuels

A review of recent advances in manganese-based supercapacitors

Mohammad Nazmus Sakib et al.

Summary: Manganese-based supercapacitors are gaining attention for their low manufacturing cost and environmental friendliness. By utilizing various surface modifications and structural changes, the performance of the supercapacitors can be enhanced.

JOURNAL OF ENERGY STORAGE (2021)

Article Engineering, Chemical

Electrodeposited Co0.85Se thin films as free-standing cathode materials for high-performance hybrid supercapacitors

Aniruddha Mondal et al.

Summary: In this study, a Co0.85Se thin film with excellent electrochemical performance was prepared via electrodeposition and applied in HSCs. The optimized Co0.85Se cathode showed outstanding specific capacity and stability at different current densities.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Energy & Fuels

Enhanced electrochemical performance of battery-grade cobalt phosphate via magnetron sputtered copper interfacial layer for potential supercapattery applications

Muhammad Zahir Iqbal et al.

Summary: This study demonstrates the tuned electrochemical performance of cobalt phosphate via introducing a magnetron sputtered copper interfacial layer, providing a new approach for potential supercapattery devices. The electrode material showed superior specific capacity and electrochemical performance with excellent cyclic stability. The designed supercapattery exhibited efficient charge storage and release at different charge-discharge rates.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Investigation on mesoporous bimetallic tungstate nanostructure for high-performance solid- state supercapattery

S. Prabhu et al.

Summary: Identification of electrode materials with excellent specific capacity and energy density is crucial for high-performance supercapattery device. Transition metal tungstate, like mesoporous Ni(1-x)Co(x)WO4, shows promising properties for supercapattery due to its electrical conductivity. Among the synthesized electrode materials, Ni(0.5)Co(0.5)WO(4) shows high specific capacity and excellent rate capability, making it a potential candidate for supercapattery applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

How Surface Species Drive Product Distribution during Ammonia Oxidation: An STM and Operando APXPS Study

Oleksii Ivashenko et al.

Summary: The oxidation of ammonia is a key reaction for the production of artificial fertilizers and for environmental protection. Depending on the application area, the catalytic reaction needs to be tuned towards the production of either N-2 or NOx, and PtRh alloys are effective catalytic materials for this purpose.

ACS CATALYSIS (2021)

Article Chemistry, Multidisciplinary

Facile Synthesis of MPS3/C (M = Ni and Sn) Hybrid Materials and Their Application in Lithium-Ion Batteries

Xianyu Liu et al.

Summary: Two novel metal thiophosphites (MTPs) hybridized with carbon, NiPS3/C and SnPS3/C composites, were successfully synthesized using an environment-friendly and cost-effective approach, showing significantly higher Li-storage capacity and better stability compared to MTPs without carbon. The SnPS3/C electrode exhibited lower internal resistance and better rate performance than NiPS3/C, with extensive ex situ experiments confirming the improved performance of MTPs/C.

ACS OMEGA (2021)

Article Chemistry, Multidisciplinary

Exploring the electrochemical performance of copper-doped cobalt-manganese phosphates for potential supercapattery applications

Meshal Alzaid et al.

Summary: This study synthesized binary and ternary metal phosphates, optimizing the composition of copper and cobalt in the ternary metal phosphates. The sample with equal compositions of copper and cobalt exhibited the highest specific capacity and was utilized as a positive electrode material in a supercapattery device. The use of ternary metal phosphates as self-supported electrode materials shows great potential for energy storage applications, as demonstrated by excellent performance in electrochemical characterizations.

RSC ADVANCES (2021)

Review Materials Science, Multidisciplinary

Metal-organic framework-based materials: advances, exploits, and challenges in promoting post Li-ion battery technologies

Anukul K. Thakur et al.

Summary: In researching the application of metal-organic frameworks (MOFs) in post-lithium batteries, there are still many issues to be addressed, particularly in the design of electrode materials, catalysts, and sulfur encapsulation.

MATERIALS ADVANCES (2021)

Article Chemistry, Physical

Facile sonochemical synthesis of 2D porous Co3O4 nanoflake for supercapattery

Arshid Numan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Reactivity of a Zirconia-Copper Inverse Catalyst for CO2 Hydrogenation

Yilin Ma et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Materials Science, Multidisciplinary

High CO performance of graphene oxide modified with CuCl by using ion implantation method

Manh B. Nguyen et al.

MATERIALS RESEARCH EXPRESS (2020)

Article Energy & Fuels

High-performance bimetallic Ni-Mn phosphate hybridized with 3-D graphene foam for novel hybrid supercapacitors

Abdulmajid A. Mirghni et al.

JOURNAL OF ENERGY STORAGE (2020)

Article Materials Science, Multidisciplinary

Spongy structured α-Ni(OH)2: Facile and rapid synthesis for supercapattery applications

J. Johnson William et al.

MATERIALS LETTERS (2019)

Article Chemistry, Physical

Influence of Ni/Cu ratio in nickel copper carbonate hydroxide on the phase and electrochemical properties

P. W. Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Chemistry, Multidisciplinary

Facile Synthesis of N,S-Codoped Hierarchically Porous Carbon with High Volumetric Pseudocapacitance

Juan Huang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Nanoscience & Nanotechnology

Effects of Cobalt Deficiency on Nickel-Rich Layered LiNi0.8Co0.1Mn0.1O2 Positive Electrode Materials for Lithium-Ion Batteries

Shuang Gao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Engineering, Biomedical

Comparison of cytotoxicity of black phosphorus nanosheets in different types of fibroblasts

Su-Jin Song et al.

BIOMATERIALS RESEARCH (2019)

Article Electrochemistry

Binder-free electro-synthesis of highly ordered nickel oxide nanoparticles and its electrochemical performance

Thomas Nesakumar Jebakumar Immanuel Edison et al.

ELECTROCHIMICA ACTA (2018)

Article Chemistry, Physical

Micro and nano-architectures of Co3O4 on Ni foam for electro-oxidation of methanol

G. Rajeshkhanna et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Multidisciplinary

Recyclable CuMgAl hydrotalcite for oxidative esterification of aldehydes with alkylbenzenes

Mei-lin Jia et al.

GREEN CHEMISTRY LETTERS AND REVIEWS (2018)

Article Materials Science, Multidisciplinary

Structural and electrochemical investigations of nanostructured NiTiO3 in acidic environment

V. Chellasamy et al.

FRONTIERS OF MATERIALS SCIENCE (2017)

Article Chemistry, Multidisciplinary

Phosphate Framework Electrode Materials for Sodium Ion Batteries

Yongjin Fang et al.

ADVANCED SCIENCE (2017)

Article Electrochemistry

Mesoporous Carbon/Co3O4 Hybrid as Efficient Electrode for Methanol Electrooxidation in Alkaline Conditions

D. K. Hassan et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2016)

Article Chemistry, Physical

Redox electrode materials for supercapatteries

Linpo Yu et al.

JOURNAL OF POWER SOURCES (2016)

Article Chemistry, Multidisciplinary

Ultrahigh capacitance of amorphous nickel phosphate for asymmetric supercapacitor applications

Fatin Saiha Omar et al.

RSC ADVANCES (2016)

Article Chemistry, Multidisciplinary

The progress of microwave-assisted hydrothermal method in the synthesis of functional nanomaterials

Ling-Yan Meng et al.

MATERIALS TODAY CHEMISTRY (2016)

Review Chemistry, Multidisciplinary

Microwave-Assisted Preparation of Inorganic Nanostructures in Liquid Phase

Ying-Jie Zhu et al.

CHEMICAL REVIEWS (2014)

Article Materials Science, Multidisciplinary

On the challenge of developing advanced technologies for electrochemical energy storage and conversion

Hyun Deog Yoo et al.

MATERIALS TODAY (2014)

Article Chemistry, Physical

Possible application of 2D-boron sheets as anode material in lithium ion battery: A DFT and AIMD study

Swastika Banerjee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)