☆ 4.7 Article

A comparative study on various cell sources for constructing tissue-engineered meniscus

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Biomedical

Regional-specific meniscal extracellular matrix hydrogels and their effects on cell-matrix interactions of fibrochondrocytes

Jinglei Wu et al.

Summary: Decellularized meniscal ECM can be used for meniscus repair and regeneration. Regional-specific variations of the ECM have been found to affect cell behaviors. These findings provide important information for reconstructing the microenvironment of native meniscus using ECM hydrogels.

BIOMEDICAL MATERIALS (2022)

Add to Collection

Review Engineering, Biomedical

Advances in electrospun scaffolds for meniscus tissue engineering and regeneration

Xiaoyu Wang et al.

Summary: The meniscus is crucial for knee joint stability, but is prone to damage. Electrospinning is an effective method for producing nanofibrous scaffolds that mimic the native extracellular matrix, showing promise for engineered meniscus construction.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Pneumatospinning Biomimetic Scaffolds for Meniscus Tissue Engineering

Erik W. Dorthe et al.

Summary: This study explores whether pneumatospinning can produce thicker collagen type I fibrous scaffolds that can support cell infiltration and neo-fibrocartilage tissue formation. The results show that pneumatospun scaffolds have higher porosity and thicker thickness, and can support cell growth and neo-tissue formation.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Towards Bioinspired Meniscus-Regenerative Scaffolds: Engineering a Novel 3D Bioprinted Patient-Specific Construct Reinforced by Biomimetically Aligned Nanofibers

Thiago Domingues Stocco et al.

Summary: This study presents a new biofabrication strategy for developing biomimetic meniscus scaffolds. The use of bioprinted cell-laden hydrogel reinforced by aligned nanofiber sheets improved the structural integrity, shape fidelity, and mechanical properties of the scaffolds. Importantly, the introduction of nanofiber mats did not negatively affect cell viability. This bioengineering approach offers a promising strategy for tissue engineering of the knee meniscus.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2022)

Add to Collection

Review Cell & Tissue Engineering

Meniscus repair: up-to-date advances in stem cell-based therapy

Yixin Bian et al.

Summary: Meniscus injuries can lead to pain and degenerative changes, affecting patient productivity and quality of life. Stem cell-based therapy shows potential for meniscus repair but faces challenges.

STEM CELL RESEARCH & THERAPY (2022)

Add to Collection

Review Biotechnology & Applied Microbiology

Mesenchymal Stem Cells From Different Sources in Meniscus Repair and Regeneration

Guocheng Ding et al.

Summary: This review aims to summarize and compare the application of mesenchymal stem cells from different sources for meniscal repair and regeneration. Although mesenchymal stem cells have shown specific advantages in meniscus repair, their cartilage-forming properties are yet to be systematically compared across different sources.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Add to Collection

Article Engineering, Biomedical

Repair of osteochondral defects mediated by double-layer scaffolds with natural osteochondral-biomimetic microenvironment and interface

Tao Wang et al.

Summary: This study developed a novel double-layer osteochondral biomimetic scaffold for the tissue-specific repair of osteochondral defects. The scaffold was optimized using UV laser and decellularization techniques and gelatin-methacryloyl hydrogel as a cell carrier. In vitro results showed that the scaffold components could efficiently regulate the chondrogenic/osteogenic differentiations of bone marrow stromal cells. Importantly, the scaffold combined with BMSC-laden hydrogel successfully repaired the osteochondral defects in a rabbit knee joint model.

MATERIALS TODAY BIO (2022)

Add to Collection

Article Engineering, Biomedical

Cyclic freeze-thaw grinding to decellularize meniscus for fabricating porous, elastic scaffolds

Yangfan Ding et al.

Summary: This study presents a practical protocol for preparing elastic and porous dmECM scaffolds. The freeze-thaw grinding method combined with DNase treatment effectively removed cellular DNA and retained bioactive components from porcine meniscus. The resulting dmECM scaffolds exhibited good mechanical properties and promoted proliferation and collagen production of primary articular chondrocytes. Evaluation in a rat model showed minor foreign body reactions, indicating effective antigen removal from dmECM.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Phenotypic characterization of regional human meniscus progenitor cells

Jingsong Wang et al.

Summary: This study identifies and characterizes progenitor cell populations in different regions of the human meniscus. Progenitor cells from the vascular region show enhanced proliferative and fibrochondrogenic characteristics compared to those from the avascular region. These findings indicate that meniscal progenitors may be a promising cell therapy strategy for meniscal regeneration.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2022)

Add to Collection

Article Orthopedics

Comparative Evaluation of Synovial Multipotent Stem Cells and Meniscal Chondrocytes for Capability of Fibrocartilage Reconstruction

Jisoo Lee et al.

Summary: The research aimed to compare the fibrocartilage construction capability of different cell sources in the presence of mechanical stimuli. Results showed that MCs exhibited GAG-rich matrix formation during default in vitro chondrogenesis, while SvMSCs had superior cell growth characteristics but higher senescence tendency. Static tension negatively impacted GAG production in MCs but did not significantly affect their tissue growth, whereas SvMSCs showed inferior chondrogenic differentiation and tissue growth under static tension.

CARTILAGE (2021)

Add to Collection

Article Engineering, Biomedical

Harnessing electrospun nanofibers to recapitulate hierarchical fibrous structures of meniscus

Xiaoyu Wang et al.

Summary: Electrospinning was used to create scaffolds with nanofibrous structures mimicking the heterogeneous ultrastructure of meniscus ECM. Different deposition methods resulted in scaffolds with random or aligned fibrous structures resembling the surface, superficial layers, and inner part of the meniscus. These electrospun scaffolds showed distinct fibrous anisotropies and mechanical properties, indicating potential for enhancing meniscus repair and regeneration.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

3D cell-printing of biocompatible and functional meniscus constructs using meniscus-derived bioink

Suhun Chae et al.

Summary: The study developed a 3D cell-printed meniscus construct using a bioink with high controllability and durable architectural integrity, which exhibited biocompatibility, excellent mechanical properties, and improved biological functionality similar to that of the native meniscus, showing potential for meniscus regeneration in clinical practice.

BIOMATERIALS (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Precision 3D printed meniscus scaffolds to facilitate hMSCs proliferation and chondrogenic differentiation for tissue regeneration

Xingyu Deng et al.

Summary: The study utilized 3D printing technology with cryo-printing to create polyurethane scaffolds that mimic native meniscus, improving bioactivity for hMSCs culture. Surface modification with fibronectin was found to enhance stem cell functions and favor long-term chondrogenesis. The scaffolds successfully facilitated hMSCs chondrogenic differentiation and demonstrated good in vivo biocompatibility, highlighting their potential for meniscus regeneration.

JOURNAL OF NANOBIOTECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Nanofiber Configuration of Electrospun Scaffolds Dictating Cell Behaviors and Cell-scaffold Interactions

Haiyan Li et al.

Summary: The study demonstrated that electrospun nanofiber scaffolds support good proliferation and viability of murine fibroblasts. Different fiber configurations profoundly influence cell morphology and orientation, but have no effect on cell proliferation rate. Scaffolds with a porous fibrous configuration, such as yarn scaffold, show greater proliferation rate and significantly elevated collagen deposition.

CHEMICAL RESEARCH IN CHINESE UNIVERSITIES (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

3D Printed Poly(ε-Caprolactone)/Meniscus Extracellular Matrix Composite Scaffold Functionalized With Kartogenin-Releasing PLGA Microspheres for Meniscus Tissue Engineering

Hao Li et al.

Summary: This study presents a composite scaffold for meniscus tissue engineering, consisting of a 3D-printed PCL scaffold, injected MECM, and KGN-loaded PLGA microspheres. The combination showed enhanced hydrophilicity, bioactivity, cell adhesion, proliferation, and chondrogenic differentiation. The sustained release of KGN from the scaffold contributed to improved cell affinity and chondrogenic activity, indicating promising application prospects in MTE.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)

Add to Collection

Article Engineering, Biomedical

Nanofiber configuration affects biological performance of decellularized meniscus extracellular matrix incorporated electrospun scaffolds

Haiyan Li et al.

Summary: This study investigated the influence of nanofiber configuration on electrospun scaffolds, finding that twisting nanofibers into yarns significantly regulated gene expression levels and promoted extracellular matrix production, while also increasing scaffold pore size and porosity.

BIOMEDICAL MATERIALS (2021)

Add to Collection

Article Engineering, Biomedical

Cell-free 3D wet-electrospun PCL/silk fibroin/Sr2+ scaffold promotes successful total meniscus regeneration in a rabbit model

Yangyang Li et al.

ACTA BIOMATERIALIA (2020)

Add to Collection

Article Cell Biology

Mohawk is a transcription factor that promotes meniscus cell phenotype and tissue repair and reduces osteoarthritis severity

Kwang Il Lee et al.

SCIENCE TRANSLATIONAL MEDICINE (2020)

Add to Collection

Review Engineering, Biomedical

Current Concepts in Meniscus Tissue Engineering and Repair

Bahar Bilgen et al.

ADVANCED HEALTHCARE MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Programmed biomolecule delivery to enable and direct cell migration for connective tissue repair

Feini Qu et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Engineering, Biomedical

Stem cell delivery in tissue-specific hydrogel enabled meniscal repair in an orthotopic rat model

Xiaoning Yuan et al.

BIOMATERIALS (2017)

Add to Collection

Article Engineering, Biomedical

Micromechanical anisotropy and heterogeneity of the meniscus extracellular matrix

Qing Li et al.

ACTA BIOMATERIALIA (2017)

Add to Collection

Article Materials Science, Biomaterials

Enhancement of chondrogenic differentiation of rabbit mesenchymal stem cells by oriented nanofiber yarn-collagen type I/hyaluronate hybrid

Xianyou Zheng et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Add to Collection

Article Cell & Tissue Engineering

Characterization of mesenchymal stem cells and fibrochondrocytes in three-dimensional co-culture: analysis of cell shape, matrix production, and mechanical performance

Mary Clare McCorry et al.

STEM CELL RESEARCH & THERAPY (2016)

Add to Collection

Article Engineering, Biomedical

An injectable extracellular matrix derived hydrogel for meniscus repair and regeneration

Jinglei Wu et al.

ACTA BIOMATERIALIA (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Cell Infiltration and Vascularization in Porous Nanoyarn Scaffolds Prepared by Dynamic Liquid Electrospinning

Jinglei Wu et al.

JOURNAL OF BIOMEDICAL NANOTECHNOLOGY (2014)

Add to Collection

Article Cell Biology

Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep

Chang H. Lee et al.

SCIENCE TRANSLATIONAL MEDICINE (2014)

Add to Collection

Article Engineering, Biomedical

High density type I collagen gels for tissue engineering of whole menisci

Jennifer L. Puetzer et al.

ACTA BIOMATERIALIA (2013)

Add to Collection

Article Engineering, Biomedical

Hydrogels derived from demineralized and decellularized bone extracellular matrix

M. J. Sawkins et al.

ACTA BIOMATERIALIA (2013)

Add to Collection

Article Cell & Tissue Engineering

Porosity and Cell Preseeding Influence Electrospun Scaffold Maturation and Meniscus Integration In Vitro

Lara C. Ionescu et al.

TISSUE ENGINEERING PART A (2013)

Add to Collection

Article Engineering, Biomedical

Influence of perfusion and compression on the proliferation and differentiation of bone mesenchymal stromal cells seeded on polyurethane scaffolds

Chaoxu Liu et al.

BIOMATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Electrospun nanoyarn scaffold and its application in tissue engineering

Jinglei Wu et al.

MATERIALS LETTERS (2012)

Add to Collection

Article Multidisciplinary Sciences

Sacrificial nanofibrous composites provide instruction without impediment and enable functional tissue formation

Brendon M. Baker et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)

Add to Collection

Article Cell & Tissue Engineering

The Effect of the Duration of Mechanical Stimulation and Post-Stimulation Culture on the Structure and Properties of Dynamically Compressed Tissue-Engineered Menisci

Jennifer L. Puetzer et al.

TISSUE ENGINEERING PART A (2012)

Add to Collection

Article Engineering, Biomedical

The impact of low levels of collagen IX and pyridinoline on the mechanical properties of in vitro engineered cartilage

Dan Yan et al.

BIOMATERIALS (2009)

Add to Collection

Article Cell & Tissue Engineering

The Knee Meniscus: A Complex Tissue of Diverse Cells

Johannah Sanchez-Adams et al.

CELLULAR AND MOLECULAR BIOENGINEERING (2009)

Add to Collection

Article Orthopedics

Tissue engineering with meniscus cells derived from surgical debris

B. M. Baker et al.

OSTEOARTHRITIS AND CARTILAGE (2009)

Add to Collection

Article Biology

Evaluation of the viability and osteogenic differentiation of cryopreserved human adipose-derived stem cells

Guangpeng Liu et al.

CRYOBIOLOGY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.