☆ 4.8 Article

Improving process stability of electron beam directed energy deposition by closed-loop control of molten pool

ADDITIVE MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Electric current evaluation for process monitoring in electron beam directed energy deposition

Zhiyue Liang et al.

Summary: A dual-channel absorbed current monitoring method based on absorbed electrons was developed for in situ monitoring of droplet transfer in EB-DED, accurately identifying different droplet transfer modes and parameter changes. This method provides an effective means for stable deposition process.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A Coaxial Wire-Feed Additive Manufacturing of Metal Components Using a Profile Electron Beam in Space Application

Dmytro Kovalchuk et al.

Summary: This article introduces a technology of metal 3D printing using electron beam, which has been proven to produce high-quality parts on Earth. It explores the feasibility and advantages of applying this technology in space applications, as well as the technical implementation and metallurgical aspects.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Engineering, Manufacturing

Feedback control of variable width in gas metal arc-based additive manufacturing

Jun Xiong et al.

Summary: This study successfully fabricated variable-width components in GMA-AM using a passive vision sensing and feedback control system, which maintained the expected layer width by controlling the arc current. Experimental results demonstrate that this system significantly improves the stability of layer width.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Energy & Fuels

Energy and material efficiency strategies enabled by metal additive manufacturing - A review for the aeronautic and aerospace sectors

Helena Monteiro et al.

Summary: Conventional manufacturing of aeronautic and aerospace parts consumes significant resources and emits a large amount of waste and carbon dioxide. Metal additive manufacturing (MAM) has the potential to reduce resource consumption, especially for energy-intensive materials like titanium. This systematic literature review on MAM processes in the aerospace sector highlights the importance of optimizing MAM and assessing its environmental impact compared to conventional manufacturing.

ENERGY REPORTS (2022)

Add to Collection

Article Engineering, Manufacturing

Interlayer closed-loop control of forming geometries for wire and arc additive manufacturing based on fuzzy-logic inference

Yongzhe Li et al.

Summary: This paper proposes a novel control mechanism based on fuzzy-logic inference to enhance the fabrication accuracy of wire and arc additive manufacturing (WAAM). The mechanism adjusts deposition parameters of beads in the subsequent layer by considering the geometrical errors measured on already deposited layers and deposition context, forming an interlayer closed-loop control (ICLC) mechanism. The effectiveness of this control mechanism and the implemented controller was validated through simulative studies and real-life experiments, showing good accuracy in height of fabricated cuboid blocks.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Industrial

Sag feedback based multi-roll coordinating optimal control of a low-tension roll-to-roll system

Zhiyue Liang et al.

Summary: The study introduces a multi-roll coordinating optimal control method that adjusts the rolls' speeds to maintain the stability of the sheets in low-tension R2R systems, aiming to address speed fluctuations. Utilizing a MIMO LQI controller, the effectiveness is confirmed through simulations and experiments, with investigation on hyperparameters and comparison with traditional PID control methods showing better performance.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Add to Collection

Article Thermodynamics

A fundamental investigation of thermo-capillarity in laser powder bed fusion of metals and alloys

Mohamad Bayat et al.

Summary: This study utilizes a multi-physics numerical model to investigate the effects of thermo-capillarity on the melt pool morphology and thermal fluid conditions during the Laser Powder Bed Fusion process. The results demonstrate that higher Marangoni numbers lead to decreased temperature gradients and more uniform temperature fields in the melt pool. Additionally, a novel methodology is introduced for calculating the melt pool's average Nusselt number, which can be used to simplify heat conduction simulations with effective liquid conductivity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Industrial

Dual-detector electronic monitoring of electron beam selective melting

D. C. Zhao et al.

Summary: Electron Beam Selective Melting (EBSM) is an advanced additive manufacturing technique used in various industrial fields, but faces challenges in process monitoring and quality control. A dual-detector electronic imaging system was proposed for in-situ monitoring of EBSM process, showing a linear correlation between electronic current and surface height gradient, and the capability to visualize deposited surfaces and identify defects. The correlation between signal and topography indicates the potential for in-situ surface reconstruction and in-process quality control during EBSM process.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Detection and control of the morphology of TIG-metal fused coating additive manufacturing

Wang Xin et al.

Summary: The study proposed a new control strategy for Metal fused-coating additive manufacturing composite variable polarity tungsten inert gas (MFCAM & TIG), achieving precise control of part shapes through the design of a laser band-pass composite filter sensing system and a fuzzy PID iterative learning strategy.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

In situ X-ray imaging of pore formation mechanisms and dynamics in laser powder-blown directed energy deposition additive manufacturing

Sarah J. Wolff et al.

Summary: Directed energy deposition additive manufacturing is gaining attention for its applications in repair, remanufacturing, and fabrication of functionally graded structures. Understanding porosity formation mechanisms, especially related to the interactions between the delivered powder and melt pool, is crucial for DED AM part quality. High-speed X-ray imaging reveals four types of pore formation mechanisms unique to the laser-based, powder-blown DED process, providing insights for porosity mitigation and control.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Engineering, Manufacturing

Closed-loop control of medium-thickness plate arc welding based on weld-face vision sensing

Guodong Peng et al.

Summary: This paper introduces an innovative method of controlling weld formation, based on weld-face vision sensing, proposing the concept of "depression degree of the weld pool" and developing an image processing procedure. Experiments show that the method is remarkably effective in achieving full penetration and keeping backside bead width constant.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Chemistry, Analytical

Closed-Loop Control of Droplet Transfer in Electron-Beam Freeform Fabrication

Shuhe Chang et al.

SENSORS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

An in-situ monitoring system for electron beam wire-feed additive manufacturing

Jiaqi Guo et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Continuous Electron Beam Post-Treatment of EBF3-Fabricated Ti-6Al-4V Parts

Alexey Panin et al.

METALS (2019)

Add to Collection

Review Engineering, Industrial

Metal additive manufacturing in the commercial aviation industry: A review

Annamaria Gisario et al.

JOURNAL OF MANUFACTURING SYSTEMS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Beyond the Toolpath: Site-Specific Melt Pool Size Control Enables Printing of Extra-Toolpath Geometry in Laser Wire-Based Directed Energy Deposition

Brian T. Gibson et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Instruments & Instrumentation

Application of infrared thermography for laser metal-wire additive manufacturing in vacuum

X. P. Ding et al.

INFRARED PHYSICS & TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-scale modeling of electron beam melting of functionally graded materials

Wentao Yan et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Engineering, Mechanical

On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components

S. C. Wu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2016)

Add to Collection

Article Engineering, Industrial

Closed-loop control of variable layer width for thin-walled parts in wire and arc additive manufacturing

Jun Xiong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Optics

Increased stability in laser metal wire deposition through feedback from optical measurements

Almir Heralic et al.

OPTICS AND LASERS IN ENGINEERING (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.