☆ 4.8 Article

Multi-material additive manufacturing of self-heating structures for out-of-autoclave post-processing and de-icing

ADDITIVE MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Methodology to design and optimise dispersed continuous carbon fibre composites parts by fused filament fabrication

D. Garoz Gomez et al.

Summary: This article proposes a novel methodology to design, manufacture and optimise structural parts with mechanical behaviour adapted to applications. The 3D printing technology based on FFF allows for the exact setup of the continuous reinforcement orientation. The mechanical properties of the 3D printer laminates have been enhanced via pressurised post-processing, which has been validated through virtual testing.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

Add to Collection

Article Engineering, Manufacturing

Hybrid additive manufacturing of polymer composites reinforced with buckypapers and short carbon fibres

Bartosz Mikolaj Gackowski et al.

Summary: A new hybrid additive manufacturing method is proposed to simplify the preparation of cost-effective polymer composites reinforced with short fibers and nanotubes by controlling the weight percentage and number of buckypapers. Improvement in mechanical properties of the materials can be achieved through this method. Additionally, the failure mechanisms of the composites and potential future applications are discussed.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced tensile strength of acrylonitrile butadiene styrene composite specimens fabricated by overheat fused filament fabrication printing

Thang Q. Tran et al.

Summary: This study demonstrates the use of overheat fused filament fabrication (FFF) to enhance the tensile strength and structure of CF/ABS and GF/ABS specimens. The overheat printing process improves diffusion and interfacial bonding between composite rasters, leading to reduced porosity and increased mechanical performance.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Composites

Processing and characterization of tailorable 3D-printed acrylonitrile butadiene styrene composites with hybrid buckypapers

Bartosz Mikolaj Gackowski et al.

Summary: In this work, a hybrid additive manufacturing process was used to incorporate hybrid buckypapers into an acrylonitrile butadiene styrene matrix. The composites reinforced with hybrid buckypapers showed improved mechanical properties compared to neat ABS, and further improvement was observed after modifying the buckypapers with epoxy or thermoplastic polyurethane binders. The porosity of the composites was reduced after post-treatment, and the microstructure and mechanical properties depended on the weight fraction of binders.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Chemical

A Post-Processing Method for Improving the Mechanical Properties of Fused-Filament-Fabricated 3D-Printed Parts

Lorenzo Malagutti et al.

Summary: Fused-filament fabrication is a popular 3D printing technique, but its mechanical properties limit its use in structural applications. Post-processing methods, such as remelting and compaction, can improve mechanical properties and make the material more isotropic.

PROCESSES (2022)

Add to Collection

Review Energy & Fuels

Physical De-Icing Techniques for Wind Turbine Blades

Valery Okulov et al.

Summary: The review presents physical solutions for de-icing wind turbine blades, emphasizing the use of both active and passive physical de-icing techniques. Among them, passive methods, such as superhydrophobic coatings, are highlighted for their cost-effectiveness and promising outcomes.

ENERGIES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Printed Single-Wall Carbon Nanotube-Based Joule Heating Devices Integrated as Functional Laminae in Advanced Composites

George Karalis et al.

Summary: This study presents the design and fabrication of novel printed single-wall carbon nanotube electrothermal Joule heating devices, which are integrated into carbon fiber reinforced polymer composite laminates to provide multifunctionality with efficient and stable performance. The devices demonstrate efficient out-of-oven curing of thermoset matrix and provide additional functions such as deicing and self-sensing, making them suitable for applications in energy and transport sectors. The modular design also allows for large-area applications via interconnected arrays of printed devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Assessment of Manufacturing Parameters for New 3D-Printed Heating Circuits Based on CNT-Doped Nanocomposites Processed by UV-Assisted Direct Write

Alejandro Cortes et al.

Summary: This study developed a simple strategy to transform any structure into an efficient surface heater by applying low voltage to 3D printed nanocomposite circuits. The optimization of the printing process and exploration of different layers of circuits demonstrated excellent heating performance of four-layer printed circuits, suitable for long-term heating and deicing.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Review Engineering, Manufacturing

A market assessment of additive manufacturing potential for the aerospace industry

Sadettin Cem Altiparmak et al.

Summary: Additive Manufacturing, or 3D printing, is a layer-by-layer material deposition process that is well-suited for creating lightweight, cost-efficient, and unique geometry components for the aerospace industry. Aerospace industry holds a significant market share in the global AM market and is expected to continue to be a major contributor in this rapidly changing and competitive market.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Ground testing of a 1% gravo-aeroelastically scaled additively-manufactured wind turbine blade with bio-inspired structural design

Meghan Kaminski et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Materials Science, Characterization & Testing

Self-heating 3D printed continuous carbon fiber/epoxy mesh and its application in wind turbine deicing

Yueke Ming et al.

POLYMER TESTING (2020)

Add to Collection

Article Polymer Science

Graphene/Carbon Nanotube Hybrid Nanocomposites: Effect of Compression Molding and Fused Filament Fabrication on Properties

Sithiprumnea Dul et al.

POLYMERS (2020)

Add to Collection

Article Materials Science, Composites

Carbon fiber/poly ether ether ketone composites modified with graphene for electro-thermal deicing applications

Lei Pan et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

Stretchable, self-healing and biodegradable water-based heater produced by 3D printing

Binbin Guo et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Polymer Science

Direct Joule Heating as a Means to Efficiently and Homogeneously Heat Thermoplastic Prepregs

Jochen Wellekoetter et al.

POLYMERS (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

A review of 3D printing techniques for environmental applications

Mallikarjuna N. Nadagouda et al.

CURRENT OPINION IN CHEMICAL ENGINEERING (2020)

Add to Collection

Review Green & Sustainable Science & Technology

A review of integrating ice detection and mitigation for wind turbine blades

Ezieddin Madi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Add to Collection

Article Automation & Control Systems

Mechanical performance of carbon fiber/epoxy composites cured by self-resistance electric heating method

Shuting Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Review Engineering, Aerospace

Aircraft icing: An ongoing threat to aviation safety

Yihua Cao et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Composites

Advanced carbon fiber composite out-of-autoclave laminate manufacture via nanostructured out-of-oven conductive curing

Jeonyoon Lee et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Graphene-based surface heater for de-icing applications

Nazmul Karim et al.

RSC ADVANCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics

G. D. Goh et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Economic viability analysis for icing blades detection in wind turbines

Jesus Maria Pinar Perez et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Towards 3D-printed organic electronics: Planarization and spray-deposition of functional layers onto 3D-printed objects

Aniello Falco et al.

ORGANIC ELECTRONICS (2016)

Add to Collection

Article Engineering, Manufacturing

Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques

Michael Dawoud et al.

JOURNAL OF MANUFACTURING PROCESSES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Aligned Carbon Nanotube Film Enables Thermally Induced State Transformations in Layered Polymeric Materials

Jeonyoon Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.