Related references
Note: Only part of the references are listed.Process design and optimization of single mixed-refrigerant processes with the application of deep reinforcement learning
Sam Kim et al.
APPLIED THERMAL ENGINEERING (2023)
Rigorous simulation of geothermal power plants to evaluate environmental performance of alternative configurations
Marco Vaccari et al.
RENEWABLE ENERGY (2023)
Next generation pure component property estimation models: With and without machine learning techniques
Abdulelah S. Alshehri et al.
AICHE JOURNAL (2022)
Multi-stage gas separation process for separation of carbon dioxide from methane: Modeling, simulation, and economic analysis
Maryam Samei et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2022)
Production of levulinic acid and alkyl levulinates: a process insight
Daniele Di Menno Di Bucchianico et al.
GREEN CHEMISTRY (2022)
Simulation-Based Optimization of a Multiple Gas Feed Sweetening Process
Weixuan Zhu et al.
ACS OMEGA (2022)
Process structure-based recurrent neural network modeling for predictive control: A comparative study
Mohammed S. Alhajeri et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)
Reinforcement learning for online adaptation of model predictive controllers: Application to a selective catalytic reduction unit
Elijah Hedrick et al.
COMPUTERS & CHEMICAL ENGINEERING (2022)
A comparative study on Aspen Hysys interconnection methodologies
Pedro Santos Bartolome et al.
COMPUTERS & CHEMICAL ENGINEERING (2022)
Analysis of pressure behavior during runaway reaction with case studies of various depressurization designs
Yuto Mizuta et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)
Comprehensive review on mechanism analysis and numerical simulation of municipal solid waste incineration process based on mechanical grate
Jiabin Zhuang et al.
FUEL (2022)
Multi-Objective Optimization of a Crude Oil Hydrotreating Process with a Crude Distillation Unit Based on Bootstrap Aggregated Neural Network Models
Wissam Muhsin et al.
PROCESSES (2022)
Analytical RTO for a critical distillation process based on offline rigorous simulation
Alessandro Brambilla et al.
IFAC PAPERSONLINE (2022)
Investigation and Optimisation of the Steady-State Model of a Coke Oven Gas Purification Process
Nikolett Rado-Foty et al.
ENERGIES (2022)
Tuning of oil well models with production data reconciliation
Laio Oriel Seman et al.
COMPUTERS & CHEMICAL ENGINEERING (2021)
Process systems engineering - The generation next?
E. N. Pistikopoulos et al.
COMPUTERS & CHEMICAL ENGINEERING (2021)
Bayesian Statistics to Elucidate the Kinetics of γ-Valerolactone from n-Butyl Levulinate Hydrogenation over Ru/C
Sarah Capecci et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)
Optimization of a saturated gas plant: Meticulous simulation-based optimization - A case study
Salah H. Bayoumy et al.
JOURNAL OF ADVANCED RESEARCH (2020)
A rigorous simulation model of geothermal power plants for emission control
Marco Vaccari et al.
APPLIED ENERGY (2020)
Multi-Objective Optimization Applications in Chemical Process Engineering: Tutorial and Review
Gade Pandu Rangaiah et al.
PROCESSES (2020)
Operation optimization of a cryogenic NGL recovery unit using deep learning based surrogate modeling
Wenbo Zhu et al.
COMPUTERS & CHEMICAL ENGINEERING (2020)
Computational fluid dynamics (CFD) as a tool for industrial UF/DF tank optimization
Johannes Wutz et al.
BIOCHEMICAL ENGINEERING JOURNAL (2020)
Deep learning and knowledge-based methods for computer-aided molecular design-toward a unified approach: State-of-the-art and future directions
Abdulelah S. Alshehri et al.
COMPUTERS & CHEMICAL ENGINEERING (2020)
From calorimetry to thermal risk assessment: γ-Valerolactone production from the hydrogenation of alkyl levulinates
Yanjun Wang et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Process Drive Sizing Methodology and Multi-Level Modeling Linking MATLAB(R) and Aspen Plus(R) Environment
Patrik Furda et al.
PROCESSES (2020)
CFD Modeling of Spatial Inhomogeneities in a Vegetable Oil Carbonation Reactor
Attila Egedy et al.
PROCESSES (2020)
Model predictive control of vinyl chloride monomer process by Aspen Plus Dynamics and MATLAB/Simulink co-simulation approach
J. Chinprasit et al.
26TH REGIONAL SYMPOSIUM ON CHEMICAL ENGINEERING (RSCE 2019) (2020)
Optimization of helium extraction processes integrated with nitrogen removal units: A comparative study
Homa Hamedi et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
Customized code generation based on user specifications for simulation and optimization
Gregor Tolksdorf et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
Process simulator assisted framework to support process safety analysis
Alex Kummer et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)
Multi-objective optimization of sulfur recovery units using a detailed reaction mechanism to reduce energy consumption and destruct feed contaminants
Ramees K. Rahman et al.
COMPUTERS & CHEMICAL ENGINEERING (2019)
Simulation-Based Multiobjective Optimization of the Product Separation Process within an MTP Plant
Li Zhou et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Incorporating Location Aspects in Process Integration Methodology
Hur Butun et al.
ENERGIES (2019)
Application of the concept of Linear Free Energy Relationships to the hydrogenation of levulinic acid and its corresponding esters
Yanjun Wang et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Process synthesis and simulation-based optimization of ethylbenzene/styrene separation using double-effect heat integration and self-heat recuperation technology: A techno-economic analysis
Xingang Li et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Group contribution-based property estimation methods: advances and perspectives
Rafiqul Gani
CURRENT OPINION IN CHEMICAL ENGINEERING (2019)
Thermoeconomic Analysis and Optimization of Post-combustion CO2 Recovery Unit Utilizing Absorption Refrigeration System for a Natural-Gas-Fired Power Plant
Reza Shirmohammadi et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2018)
Simulation-Optimization-Based Design of Crude Oil Distillation Systems with Preflash Units
Minerva Ledezma-Martinez et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Heating Value Reduction of LNG (Liquefied Natural Gas) by Recovering Heavy Hydrocarbons: Technoeconomic Analyses Using Simulation-Based Optimization
Arnab Dutta et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
An overview of process systems engineering approaches for process intensification: State of the art
Yuhe Tian et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
openCrys: Open-Source Software for the Multiscale Modeling of Combined Antisolvent and Cooling Crystallization in Turbulent Flow
Cezar A. da Rosa et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Single and multiple objective optimization of a natural gas liquefaction process
Rui Song et al.
ENERGY (2017)
Systematic Tools for the Conceptual Design of Inherently Safer Chemical Processes
Ruben Ruiz-Femenia et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Process Synthesis and Optimization of Propylene/Propane Separation Using Vapor Recompression and Self-Heat Recuperation
Chang Chu En Christopher et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
A Steam Utility Network Model for the Evaluation of Heat Integration Retrofits - A Case Study of an Oil Refinery
Sofie Marton et al.
JOURNAL OF SUSTAINABLE DEVELOPMENT OF ENERGY WATER AND ENVIRONMENT SYSTEMS-JSDEWES (2017)
Fuzzy Multivariable Control Strategy Applied to a Refrigeration System
Saulo Fernando dos Santos Vidal et al.
CHEMICAL PRODUCT AND PROCESS MODELING (2017)
Energy minimization of MEA-based CO2 capture process
Se-Young Oh et al.
APPLIED ENERGY (2016)
Model Predictive Control (MPC)-Based Supervisory Control and Design of Off-Gas Recovery Plant with Periodic Disturbances from Parallel Batch Reactors
Hyuncheol Ryu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Electro- or Turbo-Driven?-Analysis of Different Blast Processes of Blast Furnace
Wenqiang Sun et al.
PROCESSES (2016)
Control of depropanizer in dynamic Hysys simulation using MPC in Matlab-Simulink
Truong Thanh Tuan et al.
PROCEEDING OF 4TH INTERNATIONAL CONFERENCE ON PROCESS ENGINEERING AND ADVANCED MATERIALS (ICPEAM 2016) (2016)
Online Monitoring of Catalyst Deactivation Based on Data Reconciliation and Flowsheeting Simulator
Barbara Farsang et al.
PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING (2015)
CAPE-OPEN: Interoperability in Industrial Flowsheet Simulation Software
Jasper van Baten et al.
CHEMIE INGENIEUR TECHNIK (2014)
Using user models in Matlab® within the Aspen Plus® interface with an Excel® link
J. Fontalvo
INGENIERIA E INVESTIGACION (2014)
Optimization of propane pre-cooled mixed refrigerant LNG plant
Abdullah Alabdulkarem et al.
APPLIED THERMAL ENGINEERING (2011)
MOSAIC a web-based modeling environment for code generation
S. Kuntsche et al.
COMPUTERS & CHEMICAL ENGINEERING (2011)
Dynamic modeling and process optimization of an industrial sulfuric acid plant
Anton A. Kiss et al.
CHEMICAL ENGINEERING JOURNAL (2010)
Use of CAPE-OPEN standards in the interoperability between modelling tools (MoT) and process simulators (Simulis® Thermodynamics and ProSimPlus)
Ricardo Morales-Rodriguez et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2008)
Comparing pervaporation and vapor permeation hybrid distillation processes
J Fontalvo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
How to use simplified dynamics in model predictive control of superfractionators
G Pannocchia et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Chemical product design: challenges and opportunities
R Gani
COMPUTERS & CHEMICAL ENGINEERING (2004)
Computer-aided methods and tools for chemical product design
R Gani
CHEMICAL ENGINEERING RESEARCH & DESIGN (2004)