4.7 Article

Effect of glycerol and sorbitol on cellulose-based biodegradable films

Related references

Note: Only part of the references are listed.
Article Polymer Science

Characterization of Biodegradable Films Made from Taro Peel (Colocasia esculenta) Starch

Rusta Bidari et al.

Summary: Studies on renewable polymers have shown that starch can be used as a replacement for petroleum-based components to produce biodegradable films with plastic-like qualities. This study introduces the use of taro peel starch (TPS) for the first time in producing such films using the casting technique. The effects of different concentrations of TPS and glycerol on the properties of the TPS films were investigated, and their optimized values were determined using the response surface method. The TPS films exhibited desirable physico-mechanical and water barrier properties, making them a promising option for food packaging.

POLYMERS (2023)

Article Food Science & Technology

Effects of glycerol and sorbitol on a novel biodegradable edible film based on Malva sylvestris flower gum

Zeinab Jaderi et al.

Summary: An edible film based on Malva sylvestris flower gum was fabricated with different concentrations of glycerol and sorbitol as plasticizers. The addition of plasticizers affected the physical and mechanical properties of the film, with glycerol-based samples showing higher elongation at break. The density of the film decreased with the addition of plasticizers. The moisture content, water contact angle, and water solubility of the film increased with increasing plasticizer concentration.

FOOD SCIENCE & NUTRITION (2023)

Article Biochemistry & Molecular Biology

Fabrication and characterization of active nanocomposite films loaded with cellulose nanocrystals stabilized Pickering emulsion of clove bud oil

Sneh Punia Bangar et al.

Summary: The development of alternative food packaging materials is increasing, with a focus on functional and environment-friendly options that can extend the shelf-life of food products. This study explores the use of biopolymer-based active films loaded with antimicrobial essential oils as sustainable packaging materials. The results show that pearl millet starch films reinforced with kudzu cellulose nanocrystals and stabilized Pickering emulsions of clove bud oil exhibit improved thermal, mechanical, and water barrier properties. These active nanocomposite films also display antimicrobial activity against E. coli and S. aureus.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Article Agricultural Engineering

Cellulosic pine needles-based biorefinery for a circular bioeconomy

Ashvinder K. Rana et al.

Summary: This article reviews various efforts made to tackle the issue of pine needle waste. Pine needles have been utilized in composite materials, water purification, electronic devices, etc. Gasification, pyrolysis, saccharification combined with fermentation, and catalyst-assisted pyrolysis are promising techniques for converting pine needles into bio-energy and water purification materials. Nano cellulose extracted from pine needles exhibits appealing thermal and mechanical strength. Studying the magnetic properties of pine needles provides insights into air quality in the surrounding environment, and packaging materials made from pine needles have exceptional ethylene scavenging abilities.

BIORESOURCE TECHNOLOGY (2023)

Article Chemistry, Physical

Effect of Plasticizer Content on Mechanical and Water Vapor Permeability of Maize Starch/PVOH/Chitosan Composite Films

Carolina Caicedo et al.

Summary: The study evaluated the effects of different plasticizers on the performance of starch/PVOH/chitosan films and found that the material plasticized with 30% sorbitol showed the best performance.

MATERIALS (2022)

Article Agricultural Engineering

Cellulosic fraction from agricultural biomass as a viable alternative for plastics and plastic products

Srinivas Janaswamy et al.

Summary: Plastics, despite their versatility and cost-effectiveness, pose significant environmental concerns due to their non-biodegradability. The use of agriculture biomass, such as corn stalk and wheat straw, as a source of cellulose offers a promising solution to replace plastics, while also providing added value to the agriculture industry and farmers.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Article Chemistry, Applied

Jackfruit seed starch/tamarind kernel xyloglucan/zinc oxide nanoparticles-based composite films: Preparation, characterization, and application on tomato (Solanum lycopersicum) fruits

R. Santhosh et al.

Summary: Agricultural by-products were used to develop eco-friendly food packaging materials, which were reinforced with zinc oxide nanoparticles for improved mechanical strength, barrier properties, and antimicrobial activity. Coating tomato fruits with these materials resulted in extended shelf-life.

FOOD HYDROCOLLOIDS (2022)

Article Biochemistry & Molecular Biology

Sodium alginate/gum arabic/glycerol multicomponent edible films loaded with natamycin: Study on physicochemical, antibacterial, and sweet potatoes preservation properties

Yanghua Yuan et al.

Summary: This study developed a new type of safe, non-toxic, and edible antibacterial functional film by adding natamycin and applied it in the preservation of sweet potatoes, significantly delaying the quality changes of sweet potatoes during storage.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Biotechnology & Applied Microbiology

Utilization of cellulose and ulvan from the green seaweed Ulva lactuca in the development of composite edible films with natural antioxidant properties

Mohamed Gomaa et al.

Summary: Cellulose and ulvan extracted from green seaweed Ulva lactuca were used to develop edible films with natural antioxidant properties. The films showed improved barrier properties against UV and visible light and enhanced antioxidant properties when ulvan was incorporated into cellulose films. The cellulose/ulvan films could potentially be used for food packaging to extend the shelf-life of different food products.

JOURNAL OF APPLIED PHYCOLOGY (2022)

Article Biochemistry & Molecular Biology

Properties and Biodegradability of Films Based on Cellulose and Cellulose Nanocrystals from Corn Cob in Mixture with Chitosan

Monserrat Escamilla-Garcia et al.

Summary: The increase in consumer demand for sustainable packaging materials has led to the exploration of biopolymers as an alternative to reduce the environmental impact of plastics. This study incorporated cellulose nanocrystals and corn cobs cellulose in chitosan films and evaluated their properties and biodegradability. The addition of nanocrystals improved the water barrier properties of the films, while chitosan enhanced the biodegradability.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Article Chemistry, Applied

Improving air barrier, water vapor permeability properties of cellulose paper by layer-by-layer assembly of graphene oxide

Yufeng Li et al.

Summary: In this study, a paper-based packaging material with improved air barrier and water vapor permeability properties was successfully synthesized using a layer-by-layer assembly of poly(ethylenimine) (PEI)/graphene oxide (GO) on a filter paper substrate. By adjusting the pH of the GO suspension, significant reduction in air permeability of the modified paper was achieved. The modified paper not only extended the shelf-life of agricultural products, but also showed great potential for further applications.

CARBOHYDRATE POLYMERS (2021)

Article Chemistry, Applied

Development and characterization of antimicrobial protein films based on soybean protein isolate incorporating diatomite/thymol complex

Hejun Wu et al.

Summary: In this study, diatomite was used as an effective carrier to obtain a diatomite/thymol complex, which was further incorporated into soybean protein isolate to develop antimicrobial protein films. The complex showed improved dispersibility and compatibility in the protein matrix, leading to a film with moderate mechanical and water barrier properties. Additionally, diatomite helped reduce thymol loss during film formation and storage, prolonging its antimicrobial effect against Escherichia coli.

FOOD HYDROCOLLOIDS (2021)

Article Plant Sciences

Biodegradable Cellulose Film Prepared From Banana Pseudo-Stem Using an Ionic Liquid for Mango Preservation

Binling Ai et al.

Summary: The study found that cellulose film synthesized from banana stem fibers is a promising and environmentally friendly packaging material, showing significant effects on mango preservation with high moisture vapor and gas transmission rates.

FRONTIERS IN PLANT SCIENCE (2021)

Article Food Science & Technology

Preparation, characterization and application of SPI-based blend film with antioxidant activity

Tong Li et al.

Summary: The addition of 4.0% ferulic acid in the blend films significantly reduced the mechanical properties, barrier properties, and antioxidant activity, effectively delaying the oxidation process of pork.

FOOD PACKAGING AND SHELF LIFE (2021)

Article Polymer Science

Fabrication and Characterization of Chitosan/Cellulose Nanocrystal/Glycerol Bio-Composite Films

Kusmono et al.

Summary: The addition of 4 wt% CNC and 20 wt% glycerol can significantly improve the tensile strength and stiffness of chitosan composite films, while adding more than 8 wt% CNC results in a drastic reduction in strength and ductility.

POLYMERS (2021)

Article Food Science & Technology

Effects of soy protein isolate on mechanical and hydrophobic properties of oxidized corn starch film

Chenglong Liu et al.

Summary: The study focused on improving the mechanical properties and moisture barrier of oxidized corn starch (OS) film by incorporating soy protein isolate (SPI) at different ratios and pH values. The increase in SPI ratio and pH led to reduced moisture content and improved moisture barrier, as shown by lower water vapor permeability and higher contact angle. The blended films exhibited denser microstructures and smoother surfaces at higher pH values, suggesting interference with the intermolecular interaction of OS by SPI.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Article Multidisciplinary Sciences

Effect of glycerol plasticizer loading on the physical, mechanical, thermal, and barrier properties of arrowroot (Maranta arundinacea) starch biopolymers

J. Tarique et al.

Summary: This study investigated the development of arrowroot starch films with glycerol as a plasticizer, showing improvements in physical, mechanical, thermal, and barrier properties of the films. Increasing glycerol concentration resulted in higher film thickness and moisture content, while reducing tensile strength and modulus. The findings provide valuable insights into the potential for biodegradable food packaging.

SCIENTIFIC REPORTS (2021)

Article Food Science & Technology

Glycerol and triethyl citrate plasticizer effects on molecular, thermal, mechanical, and barrier properties of cellulose acetate films

Samiris Cocco Teixeira et al.

Summary: This study focused on optimizing the plasticizer effect of glycerol and triethyl citrate added into cellulose acetate for packaging films. Glycerol increased properties such as thickness, opacity, and water vapor permeability, while films plasticized with triethyl citrate showed opposite behavior. The choice of plasticizer should vary based on the intended application in food packaging.

FOOD BIOSCIENCE (2021)

Article Chemistry, Applied

Cellulose-based hydrogel beads: Preparation and characterization

Guangjun Nie et al.

Summary: Biopolymer-based hydrogel beads, particularly cellulose beads, show promise as eco-friendly and cost-effective delivery carriers in various industries due to their low toxicity, biocompatibility, and biodegradability. The structure and crystallinity of these beads are influenced by water and ethanol washing, with the potential for large-scale production and sustained release of bioactive agents.

CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS (2021)

Review Chemistry, Multidisciplinary

Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources

Burhan Ates et al.

CHEMICAL REVIEWS (2020)

Article Food Science & Technology

Evaluation of antimicrobial and antioxidant activities for cellulose acetate films incorporated with Rosemary and Aloe Vera essential oils

Gomaa F. El Fawal et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2019)

Review Environmental Sciences

Tackling the plastic problem: A review on perceptions, behaviors, and interventions

Lea Marie Heidbreder et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Article Food Science & Technology

Fabrication and Characterization of Native and Oxidized Potato Starch Biodegradable Films

Laura Martins Fonseca et al.

FOOD BIOPHYSICS (2018)

Article Green & Sustainable Science & Technology

Developing a green and edible film from Cassia gum: The effects of glycerol and sorbitol

Lele Cao et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Food Science & Technology

Effects of plasticizers on the properties of fish myofibrillar protein film

Pimonpan Kaewprachu et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2018)

Article Education, Scientific Disciplines

Plastic pollution and potential solutions

Christopher J. Rhodes

SCIENCE PROGRESS (2018)

Article Chemistry, Multidisciplinary

Synthetic Polymer Contamination in Bottled Water

Sherri A. Mason et al.

FRONTIERS IN CHEMISTRY (2018)

Review Nutrition & Dietetics

The Next Generation of Sustainable Food Packaging to Preserve Our Environment in a Circular Economy Context

Valerie Guillard et al.

FRONTIERS IN NUTRITION (2018)

Article Food Science & Technology

Use of response surface methodology (RSM) to optimize pea starch-chitosan novel edible film formulation

Rahul Thakur et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2017)

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

Article Chemistry, Applied

A facile route to prepare cellulose -based films

Qin Xu et al.

CARBOHYDRATE POLYMERS (2016)

Article Food Science & Technology

Hydration kinetics and physical properties of split chickpea as affected by soaking temperature and time

Saeed Johnny et al.

JOURNAL OF FOOD SCIENCE AND TECHNOLOGY-MYSORE (2015)

Article Chemistry, Applied

Effect of glycerol concentration on edible film production from cress seed carbohydrate gum

Mohammad Jouki et al.

CARBOHYDRATE POLYMERS (2013)

Review Materials Science, Biomaterials

Chitosan based edible films and coatings: A review

Maher Z. Elsabee et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

Article Food Science & Technology

Engineering Properties of Polymeric-Based Antimicrobial Films for Food Packaging

Luis Bastarrachea et al.

FOOD ENGINEERING REVIEWS (2011)

Article Food Science & Technology

Physical properties of edible modified starch/carboxymethyl cellulose films

Babak Ghanbarzadeh et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2010)

Article Chemistry, Multidisciplinary

Optically Transparent Nanofiber Paper

Masaya Nogi et al.

ADVANCED MATERIALS (2009)

Article Chemistry, Applied

Alginate and pectin composite films crosslinked with Ca2+ ions: Effect of the plasticizer concentration

Mariana Altenhofen da Silva et al.

CARBOHYDRATE POLYMERS (2009)

Article Biotechnology & Applied Microbiology

Mathematical modelling of mass transfer during rehydration process of Aloe vera (Aloe barbadensis Miller)

Antonio Vega-Galvez et al.

FOOD AND BIOPRODUCTS PROCESSING (2009)

Article Food Science & Technology

Plasticization of pea starch films with monosaccharides and polyols

Yachuan Zhang et al.

JOURNAL OF FOOD SCIENCE (2006)

Article Engineering, Chemical

Morchella esculenta (morel) rehydration process modelling

P García-Pascual et al.

JOURNAL OF FOOD ENGINEERING (2006)

Article Food Science & Technology

Combined effect of plasticizers and surfactants on the physical properties of starch based edible films

Maria Rodriguez et al.

FOOD RESEARCH INTERNATIONAL (2006)

Article Agriculture, Multidisciplinary

Effects of hydrophilic plasticizers on mechanical, thermal, and surface properties of chitosan films

NE Suyatma et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2005)

Review Chemistry, Multidisciplinary

Cellulose: Fascinating biopolymer and sustainable raw material

D Klemm et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)

Article Food Science & Technology

Effect of plasticizers on mechanical and barrier properties of rice starch film

N Laohakunjit et al.

STARCH-STARKE (2004)

Review Food Science & Technology

Migration of substances from food packaging materials to foods

IS Arvanitoyannis et al.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2004)

Article Engineering, Chemical

Application of Peleg model to study water absorption in chickpea during soaking

M Turhan et al.

JOURNAL OF FOOD ENGINEERING (2002)

Article Engineering, Chemical

Plasticizer effect on mechanical properties of β-lactoglobulin films

R Sothornvit et al.

JOURNAL OF FOOD ENGINEERING (2001)

Review Polymer Science

Advances in cellulose ester performance and application

KJ Edgar et al.

PROGRESS IN POLYMER SCIENCE (2001)