4.6 Article

A-DA′D-A Type Acceptor with a Benzoselenadiazole A′-Unit Enables Efficient Organic Solar Cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

18.55% Efficiency Polymer Solar Cells Based on a Small Molecule Acceptor with Alkylthienyl Outer Side Chains and a Low-Cost Polymer Donor PTQ10

Xiaolei Kong et al.

Summary: The development of A-DA 'D-A type small molecule acceptors has greatly advanced polymer solar cell technology. By modifying the outer and inner side chains of the acceptor, the photovoltaic properties can be improved. T2EH has been identified as one of the best acceptors for PTQ10-based polymer solar cells.

CCS CHEMISTRY (2023)

Article Chemistry, Multidisciplinary

High-Performance D-A Copolymer Donor Based on Difluoroquinoxaline A-Unit with Alkyl-Chlorothiophene Substituents for Polymer Solar Cells

Can Zhu et al.

Summary: Side chain engineering with fluorine substitution is widely used to enhance the photovoltaic performance of polymer donors. However, this study shows that chlorine substitution on alkyl-thiophene side chains instead of fluorine substitution can greatly shorten the synthetic route and reduce the cost of polymer donors. The synthesized copolymer donor PBQ9 demonstrated high power conversion efficiency and insensitivity to different batches, suggesting chlorine substitution as an effective strategy to improve photovoltaic performance and reduce costs.

CCS CHEMISTRY (2023)

Article Chemistry, Multidisciplinary

Binary Organic Solar Cells with 19.2% Efficiency Enabled by Solid Additive

Jianqiu Wang et al.

Summary: This study proposes the use of 3,5-dichlorobromobenzene (DCBB) to manipulate the morphology of bulk-heterojunction organic solar cells (OSCs), resulting in improved operability and photostability. Simulation experiments reveal the charge distribution and non-covalent interaction of DCBB with active layer materials. The addition of DCBB effectively tunes the aggregation behavior during film formation, leading to a phase separation and molecular packing that enhances the power conversion efficiency to 19.2%.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

Low-Cost and High-Performance Polymer Solar Cells with Efficiency Insensitive to Active-Layer Thickness

Xiaolei Kong et al.

Summary: The rapid increase in power conversion efficiency (PCE) of polymer solar cells (PSCs) has brought them closer to large-scale commercialization. However, issues like material cost and PCE sensitivity to active-layer thickness need to be addressed. In this study, a high-performance ternary PSC was fabricated using a low-cost polymer donor PTQ10 and a new A-DA'D-A-type small molecule acceptor (SMA) m-TEH. The optimized ternary PSCs exhibited an outstanding PCE of 19.34% and showed superior tolerance to active-layer thickness, achieving a PCE of 18.02% even at 300 nm. These results suggest great potential for future large-scale production and commercial application of PSCs based on PTQ10:m-TEH:m-PEH.

CCS CHEMISTRY (2023)

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

Article Chemistry, Multidisciplinary

A-π-A structured non-fullerene acceptors for stable organic solar cells with efficiency over 17%

Wei Liu et al.

Summary: This study proposes a new design strategy for organic solar cell electron acceptors and successfully develops a quasi-macromolecule with an A-π-A structure. This quasi-macromolecule improves the long-term stability and power conversion efficiency of organic solar cells, and possesses synthetic flexibility and high molecular weight.

SCIENCE CHINA-CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Chlorinated polymerized small molecule acceptor enabling ternary all-polymer solar cells with over 16.6% efficiency

Ke Hu et al.

Summary: A new small-molecule acceptor-based polymerized solar cell (PYCl-T) with high efficiency and thermal stability was designed and synthesized using a ternary blending system.

SCIENCE CHINA-CHEMISTRY (2022)

Article Chemistry, Physical

Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics

Lingling Zhan et al.

Summary: By constructing ternary organic photovoltaics, the open-circuit voltage (V-oc) loss is reduced, leading to a higher voltage without sacrificing the absorbing range. In addition, the ternary blend exhibits enhanced charge transport property and a higher fill factor.

JOULE (2022)

Article Nanoscience & Nanotechnology

Small-Molecule Acceptor with Unsymmetric Substituents and Fused Rings for High-Performance Organic Solar Cells with Enhanced Mobility and Reduced Energy Losses

Zechen Li et al.

Summary: In this study, a new unsymmetric small-molecule acceptor (SMA) BTPOSe-4F was designed for the fabrication of organic solar cells (OSCs). It showed improved performance in terms of LUMO energy level, nonradiation energy loss, and charge extraction properties. The addition of PC71BM further enhanced the power conversion efficiency (PCE).

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

The effect of alkyl substitution position of thienyl outer side chains on photovoltaic performance of A-DA′D-A type acceptors

Xiaolei Kong et al.

Summary: The side chain configuration of organic small molecule acceptors (SMAs) has been found to significantly impact their intermolecular interaction and aggregation morphology. In this study, two isomeric A-DA 'D-A type SMAs with thienyl outer side chains were designed and synthesized to investigate the effects of thienyl conjugated outer side chains and the alkyl substitution position on SMA properties. It was found that the beta-substituted m-TEH SMA exhibited stronger intermolecular interaction and higher electron mobility compared to the alpha-substituted o-TEH SMA. Furthermore, the m-TEH blend film with the PBQ6 polymer donor showed more suitable phase separation, enhanced molecular packing, and improved hole and electron mobilities compared to the o-TEH blend film. Organic solar cells based on PBQ6:m-TEH achieved a significantly higher power conversion efficiency (PCE) of 18.51% compared to PBQ6:o-TEH based solar cells. This study demonstrates that m-TEH with 2-ethylhexyl beta-substituted thienyl outer side chains is an excellent high-performance SMA for organic solar cells.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Chemistry, Multidisciplinary

Non-Halogenated-Solvent Processed and Additive-Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Shucheng Qin et al.

Summary: This study successfully fabricated high-performance tandem OSCs using solution processing with non-halogenated solvents without additives. The two active layers showed better phase segregation and charge transport properties, leading to an efficiency of up to 16.67%.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

A Quinoxaline-Based D-A Copolymer Donor Achieving 17.62% Efficiency of Organic Solar Cells

Can Zhu et al.

Summary: Side-chain engineering is a crucial strategy for enhancing the power conversion efficiency of organic solar cells. In this study, two copolymers were designed and synthesized, with PBQ6 exhibiting superior performance and achieving a high efficiency of 17.62% for organic solar cells.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Patterned Blade Coating Strategy Enables the Enhanced Device Reproducibility and Optimized Morphology of Organic Solar Cells

Jian Yuan et al.

Summary: The morphology evolution kinetics at multi-scale regime is crucial for industrial fabrication of high-performance organic solar cells. An innovative strategy utilizing a patterned blade to print non-fullerene based devices in ambient conditions has been demonstrated. Comparing patterned and normal blade printing reveals avenues to optimize blend films morphology for superior device performance.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Side-Chain Engineering on Y-Series Acceptors with Chlorinated End Groups Enables High-Performance Organic Solar Cells

Yuzhong Chen et al.

Summary: Chemical modifications of non-fullerene acceptors have been shown to improve the efficiency of organic solar cells. By introducing chlorination and inner side-chain engineering, a higher power conversion efficiency was achieved. Furthermore, the impact of asymmetric alkoxy substitution on the outer side chains was studied, highlighting the importance of achieving a balance between open-circuit voltage and short-circuit current density.

ADVANCED ENERGY MATERIALS (2021)

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Article Chemistry, Physical

Triplet exciton formation for non-radiative voltage loss in high-efficiency nonfullerene organic solar cells

Zeng Chen et al.

Summary: Nonfullerene acceptor organic solar cells with power conversion efficiency up to 18% show the formation of NFA triplet exciton as a main non-radiative recombination and energy loss channel. Side-chain fluorination in high-efficiency NFA OSCs efficiently inhibits charge recombination to NFA triplet excitons, leading to higher V-OC and PCE. This paves the way for OSCs with lower V-OC loss and efficiency exceeding 20%.

JOULE (2021)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Article Multidisciplinary Sciences

Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design

Jiaqi Du et al.

Summary: Recent advancements have been made in all-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs). Two new A-DA'D-A small molecule acceptor based PSMAs, PS-Se and PN-Se, were synthesized to study the impact of molecular structure on photovoltaic performance. Cryogenic transmission electron microscopy and photoinduced force microscopy revealed the aggregation behavior and morphology of the polymer and acceptor blend films, leading to higher power conversion efficiency in all-PSCs.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Multidisciplinary

Morphology optimization of photoactive layers in organic solar cells

Chaohua Cui et al.

Summary: Organic solar cells have unique advantages of light weight and low cost, with the morphology of the active layer being crucial for performance. Postdeposition treatments and additive treatments are effective in optimizing the morphology, leading to improved performance in organic photovoltaic applications.

AGGREGATE (2021)

Article Chemistry, Multidisciplinary

Fine-tuning of side-chain orientations on nonfullerene acceptors enables organic solar cells with 17.7% efficiency

Gaoda Chai et al.

Summary: Side-chain engineering plays a crucial role in optimizing Y-series nonfullerene acceptors (NFAs) for organic solar cells (OSCs). By investigating the orientation of side chains, it was found that the meta-positioned hexylphenyl group (m-BTP-PhC6) showed the most beneficial effects on optical absorption, intermolecular packing, and phase separation of NFAs, resulting in a device efficiency of 17.7% when paired with a donor polymer PTQ10. This study demonstrates that regulating side-chain orientations of Y-series NFAs is a promising strategy for achieving favorable morphology, high charge mobility, and improved solar cell performances.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

A-DA'D-A non-fullerene acceptors for high-performance organic solar cells

Qingya Wei et al.

SCIENCE CHINA-CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

A Non-fullerene Acceptor with Enhanced Intermolecular π-Core Interaction for High-Performance Organic Solar Cells

Francis Lin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Selenium Heterocyclic Electron Acceptor with Small Urbach Energy for As-Cast High-Performance Organic Solar Cells

Zhenzhen Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Editorial Material Chemistry, Multidisciplinary

Optimal bulk-heterojunction morphology enabled by fibril network strategy for high-performance organic solar cells

Tian Xia et al.

SCIENCE CHINA-CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Eco-Compatible Solvent-Processed Organic Photovoltaic Cells with Over 16% Efficiency

Ling Hong et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Optical Gaps of Organic Solar Cells as a Reference for Comparing Voltage Losses

Yuming Wang et al.

ADVANCED ENERGY MATERIALS (2018)

Article Energy & Fuels

Efficient organic solar cells processed from hydrocarbon solvents

Jingbo Zhao et al.

NATURE ENERGY (2016)

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Review Chemistry, Multidisciplinary

Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale

Jonathan Rivnay et al.

CHEMICAL REVIEWS (2012)

Article Chemistry, Multidisciplinary

Quantifying Bimolecular Recombination Losses in Organic Bulk Heterojunction Solar Cells

L. Jan Anton Koster et al.

ADVANCED MATERIALS (2011)

Article Materials Science, Multidisciplinary

Quantitative analysis of lattice disorder and crystallite size in organic semiconductor thin films

Jonathan Rivnay et al.

PHYSICAL REVIEW B (2011)

Article Materials Science, Multidisciplinary

Recombination in polymer-fullerene bulk heterojunction solar cells

Sarah R. Cowan et al.

PHYSICAL REVIEW B (2010)