Journal
COATINGS
Volume 13, Issue 6, Pages -Publisher
MDPI
DOI: 10.3390/coatings13061004
Keywords
high-entropy alloy coatings; thermal spray; gas atomization; cooling rate
Ask authors/readers for more resources
The aim of this study is to improve the understanding of the effect of cooling rate on the microstructure of high-entropy alloys, focusing on high-entropy alloy coatings. The microstructures of coatings deposited at different temperatures were compared with the microstructures of equivalent bulk high-entropy alloy and powder. The results showed that low and medium temperature coatings and powder consisted of a BCC microstructure, while high temperature coatings had a more complex microstructure with different phases.
The aim of this work is to improve the understanding of the effect of the cooling rate on the microstructure of high-entropy alloys, with a focus on high-entropy alloy coatings, by using a combined computational and experimental validation approach. CoCrFeMnNi0.8V coatings were deposited on a steel substrate with high velocity oxy-air-fuel spray with the employment of three different deposition temperatures. The microstructures of the coatings were studied and compared with the microstructure of the equivalent bulk high-entropy alloy fabricated by suction casting and powder fabricated by gas atomization. According to the results, the powder and the coatings deposited by low and medium temperatures consisted of a BCC microstructure. On the other hand, the microstructure of the coating deposited by high temperature was more complex, consisting of different phases, including BCC, FCC and oxides. The phase constitution of the bulk high-entropy alloy included an FCC phase and sigma. This variation in the microstructural outcome was assessed in terms of solidification rate, and the results were compared with Thermo-Calc modelling. The microstructure can be tuned by the employment of rapid solidification techniques such as gas atomization, as well as subsequent processing such as high velocity oxy-air-fuel spray with the use of different spray parameters, leading to a variety of microstructural outcomes. This approach is of high interest for the field of high-entropy alloy coatings.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available