☆ 4.6 Article

CMAS Corrosion Resistance Behavior and Mechanism of Hf6Ta2O17 Ceramic as Potential Material for Thermal Barrier Coatings

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Synthesis and thermophysical properties of ATa2O6 (A = Co, Ni, Mg, Ca) tantalates with robust CMAS resistance

Baihui Li et al.

Summary: A new family of ceramic E/TBC materials, ATa(2)O(6) (A = Co, Ni, Mg, Ca), with remarkable phase stability and matching thermal expansion coefficients, as well as low thermal conductivities, have been investigated. They exhibit good comparability with current E/TBCs in terms of hardness, toughness, and moduli. Moreover, they provide exceptional thermal insulation and CMAS corrosion protection due to their excellent high-temperature properties.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Coatings & Films

Effect of CMAS viscosity on the infiltration depth in thermal barrier coatings of different microstructures

Rishi Kumar et al.

Summary: This study investigates the effects of CMAS viscosity and coating microstructure on the infiltration depth of CMAS. The results show that low viscosity CMAS can penetrate the coating more easily, and the microstructure of the coating also affects the infiltration depth of CMAS.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Coatings & Films

The thermophysical properties and the molten CMAS resistance performance of Ytterbium Tantalate

Wenqi Yang et al.

Summary: YbTaO4 ceramic shows superior thermal and mechanical properties compared to YSZ, with better resistance to CMAS corrosion. It has the potential to replace YSZ in the preparation of TBCs for next-generation aero engines.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Reactive crystallization in HfO2 exposed to molten silicates

Collin S. Holgate et al.

Summary: This article investigates the response of Hafnia to molten silicate attack in thermal and environmental barrier coatings. It compares the response with pure ZrO2 and examines the effect of YO1.5 additions. The study found that HfO2 reacts differently with acidic and basic melts, and Y additions can exacerbate grain boundary penetration, especially in the presence of a second phase like fluorite.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Influence of the grain size on CMAS attack of Sm2Zr2O7 ceramic

Yinghua Wang et al.

Summary: The study investigates the relationship between grain size and CMAS penetration resistance in Sm2Zr2O7 ceramics, finding that nanoscale ceramics showed better resistance due to the acceleration of barrier layer formation.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Er dopant on the corrosion resistance of YSZ in CMAS melt: experimental and first-principles study

Yan Mo et al.

Summary: The study found that the penetration depth of YSZ doped with Er element is smaller than that of undoped YSZ, and theoretical results show that Er doping can weaken the thermal stress and adhesive strength of the material. Additionally, Er doping can also influence the diffusion properties of YSZ, potentially slowing down phase transitions and promoting the formation of corrosion products.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

ZrO2-doped YTaO4 as potential CMAS-resistant materials for thermal barrier coatings application

Di Wu et al.

Summary: In this study, ZrO2-doped YTaO4 materials were investigated for their CMAS resistance, showing better performance compared to classical Gd2Zr2O7. The mechanism behind the improved resistance was attributed to the rapid formation and thickening of a dense reaction product layer facilitated by ZrO2 doping. It was also found that while minor ZrO2 doping enhances CMAS resistance, heavy doping can degrade long-term resistance.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of Ta2O5 content on mechanical properties and high-temperature performance of Zr6Ta2O17 thermal barrier coatings

Qing Liu et al.

Summary: Reducing the Ta2O5 content improves the hardness, fracture toughness, high-temperature oxidation, and thermal cycle performance of Zr6Ta2O17 coatings. The Zr-12Ta specimen demonstrates superior mechanical properties and high-temperature performance.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Calcia-magnesia-alumina-silicate (CMAS) attack mechanisms and roadmap towards Sandphobic thermal and environmental barrier coatings

Andy Nieto et al.

Summary: This review critically examines the current understanding of CMAS degradation mechanisms and mitigation approaches, emphasizing the importance of designing materials approaches to mitigate CMAS attack and presenting key future research areas for 'sandphobic' thermal and environmental barrier systems.

INTERNATIONAL MATERIALS REVIEWS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hot corrosion behavior and wettability of calcium-magnesium-alumina-silicate (CMAS) on LaTi2Al9O19 ceramic

Weiwei Qu et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Versatility of potential protective layer material Ti2AlC on resisting CMAS corrosion to thermal barrier coatings

Zheng Yan et al.

CORROSION SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Ceramic Composite Materials Obtained by Electron-Beam Physical Vapor Deposition Used as Thermal Barriers in the Aerospace Industry

Bogdan Stefan Vasile et al.

NANOMATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

CMAS corrosion of YSZ thermal barrier coatings obtained by different thermal spray processes

Stefania Morelli et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Mechanical properties and calcium-magnesium-alumino-silicate (CMAS) corrosion behavior of a promising Hf6Ta2O17 ceramic for thermal barrier coatings

Z.Y. Tan et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of RETaO4 (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase

Lin Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Crystal structure solution for the A6B2O17 (A = Zr, Hf; B = Nb, Ta) superstructure

Scott J. McCormack et al.

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

In-situ determination of the HfO2-Ta2O5-temperature phase diagram up to 3000°C

Scott J. McCormack et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ investigation of Hf6Ta2O17 anisotropic thermal expansion and topotactic, peritectic transformation

Scott J. McCormack et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Ceramics

Resistance of 2ZrO2•Y2O3 top coat in thermal/environmental barrier coatings to calcia-magnesia-aluminosilicate attack at 1500°C

Amanda R. Krause et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Calcium-magnesium-alumina-silicate (CMAS) resistance characteristics of LnPO4 (Ln = Nd, Sm, Gd) thermal barrier oxides

Feng Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Microstructural characterization of GZ/CYSZ thermal barrier coatings after thermal shock and CMAS plus hot corrosion test

Mustafa Guven Gok et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Calcia-magnesia-alumino-silicate (CMAS)-induced degradation and failure of air plasma sprayed yttria-stabilized zirconia thermal barrier coatings

Amanda R. Krause et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Hot corrosion behaviour of La2(Zr0.7Ce0.3)2O7 thermal barrier coating ceramics exposed to molten calcium magnesium aluminosilicate at different temperatures

Xin Zhou et al.

CORROSION SCIENCE (2015)

Add to Collection

Article Materials Science, Ceramics

Melting and Crystallization of Silicate Systems Relevant to Thermal Barrier Coating Damage

Elisa M. Zaleski et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Coatings & Films

Molten silicate interactions with thermal barrier coatings

Hengbei Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Add to Collection

Review Materials Science, Multidisciplinary

Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects

R. Darolia

INTERNATIONAL MATERIALS REVIEWS (2013)

Add to Collection

Article Materials Science, Coatings & Films

Step-by-step investigation of degradation mechanisms induced by CMAS attack on YSZ materials for TBC applications

Guillaume Pujol et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Environmental degradation of thermal-barrier coatings by molten deposits

Carlos G. Levi et al.

MRS BULLETIN (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal-barrier coatings for more efficient gas-turbine engines

David R. Clarke et al.

MRS BULLETIN (2012)

Add to Collection

Article Geochemistry & Geophysics

Viscosity of magmatic liquids: A model

Daniele Giordano et al.

EARTH AND PLANETARY SCIENCE LETTERS (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Design and fabrication of micro-textures for inducing a superhydrophobic behavior on hydrophilic materials

Liangliang Cao et al.

LANGMUIR (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal barrier coating materials

David R. Clarke et al.

MATERIALS TODAY (2005)

Add to Collection

Article Nanoscience & Nanotechnology

Foreign object damage in a thermal barrier system: mechanisms and simulations

X Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and electrical properties of Nb2AlC, (Ti, Nb)2AlC and Ti2AlC

MW Barsoum et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings

A Rabiei et al.

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.