☆ 4.6 Article

Influence of Milling Conditions on AlxCoCrFeNiMoy Multi-Principal-Element Alloys

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Strain-Rate Sensitive Deformation Behavior under Tension and Compression of Al0.3CrFeCoNiMo0.2

Lisa-Marie Rymer et al.

Summary: The study focused on the strain-rate sensitive deformation behavior of a sintered Al- and Mo-modified CrFeCoNi high-entropy alloy. The microstructure after sintering was found to be very low in porosity and composed of a sigma phase and a fine-grained FCC matrix, with another secondary phase rich in Al and Ni. Tensile and compression tests at different strain rates showed strain-rate sensitive deformation behavior, with a noticeable increase in strain hardening rate at higher strain rates and under compressive loading.

ADVANCED ENGINEERING MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Material removal and surface generation in longitudinal-torsional ultrasonic assisted milling

Shaoqing Qin et al.

Summary: This paper introduces the Longitudinal-Torsional Ultrasonic Assisted Milling (LTUAM) method for machining high-strength titanium alloy, which can reduce cutting force and enhance surface micro-hardness.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of machining on the surface integrity of high- and medium-entropy alloys

Tim Richter et al.

Summary: This study focuses on the surface integrity of high-entropy and medium-entropy alloys during milling processes. It was found that ultrasonic-assisted milling can significantly reduce the mechanical load on the tool and workpiece surfaces, leading to improved surface integrity of the alloys.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Engineering, Manufacturing

Surface analysis in rotary ultrasonic-assisted milling of CFRP and titanium

Mohammad Lotfi et al.

Summary: This study designed and manufactured a rotary ultrasonic assisted machining tool, which demonstrated excellent performance in milling of carbon fiber reinforced polymer composite and titanium materials, effectively eliminating fiber pull-out and reducing surface roughness.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Aerospace

Effect of ultrasonic vibration on finished quality in ultrasonic vibration assisted micromilling of Inconel718

Bin Fang et al.

Summary: In the study of micromilling Inconel718, it was found that ultrasonic vibration assisted micromilling effectively improves surface quality, reduces surface defects and burr size, suppresses built-up edge formation, and decreases cutting forces compared to traditional micromilling.

CHINESE JOURNAL OF AERONAUTICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The additive manufacture processing and machinability of CrMnFeCoNi high entropy alloy

Przemyslaw Litwa et al.

Summary: The study found that the CrMnFeCoNi alloy has better machinability than the AISI 304L stainless steel, likely due to its plastic behavior, moderate strength, and significant ductility. This suggests that alloys with good machinability can be found in the class of High Entropy Alloys, and early assessment of machinability can guide alloy design activities.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Manufacturing

The energetic characteristics of milling with changing cross-section in the definition of specific cutting force by FEM method

Janos Kundrak et al.

Summary: This article summarizes the results of a project to study the cutting force during milling, which includes analyzing the technology using FEM simulation and validating it through cutting force measurements. The calculations show the importance of the chip ratio in determining the specific features of the technology, and it is advisable to avoid a chip ratio of ap/fz = 1 from an energy perspective.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

Surface finishing of hard-to-machine cladding alloys for highly stressed components

Dirk Schroepfer et al.

Summary: The supply and processing of materials for highly stressed components are usually cost-intensive, but additive manufacturing offers economic advantages for component repair and production. Coordinating machining with additive manufacturing steps is crucial for producing functional surfaces, while a great deal of knowledge is is still required for efficient machining of difficult-to-machine materials.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Influence of the cutting material on tool wear, surface roughness, and force components for different cutting speeds in face turning of CoCrFeNi high-entropy alloys

H. Liborius et al.

Summary: The study analyzes the influence of different cutting materials on high-entropy alloys, finding that CBN tools with a high content of boron nitride achieve the best surface roughness and reduced tool wear at various cutting speeds. This contributes to expanding the application field of high-entropy alloys.

22ND CHEMNITZ SEMINAR ON MATERIALS ENGINEERING - 22. WERKSTOFFTECHNISCHES KOLLOQUIUM (WTK 2021) (2021)

Add to Collection

Article Automation & Control Systems

Experimental investigations on longitudinal-torsional vibration-assisted milling of Ti-6Al-4V

Philipp M. Rinck et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Precipitation Hardening of the HVOF Sprayed Single-Phase High-Entropy Alloy CrFeCoNi

Martin Loebel et al.

COATINGS (2020)

Add to Collection

Article Acoustics

Machining forces in ultrasonic-vibration assisted end milling

Girish Chandra Verma et al.

ULTRASONICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of incorporation of Mn on the pitting corrosion performance of CrFeCoNi High Entropy Alloy at different temperatures

H. Torbati-Sarraf et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

Junpeng Liu et al.

SCIENCE CHINA-MATERIALS (2019)

Add to Collection

Article Engineering, Mechanical

Estimation of workpiece-temperature during ultrasonic-vibration assisted milling considering acoustic softening

Girish Chandra Verma et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Modeling of static machining force in axial ultrasonic-vibration assisted milling considering acoustic softening

Girish Chandra Verma et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Sintering mechanisms of mechanically alloyed CoCrFeNi high-entropy alloy powders

Rahul B. Mane et al.

JOURNAL OF MATERIALS RESEARCH (2018)

Add to Collection

Article Materials Science, Multidisciplinary

On the machining of selective laser melting CoCrFeMnNi high-entropy alloy

Jiang Guo et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Multidisciplinary Sciences

High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure

Z. Li et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Automation & Control Systems

Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling

Dennis Nespor et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718

Alfredo Suarez et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Add to Collection

Article Acoustics

Optimization of machining and vibration parameters for residual stresses minimization in ultrasonic assisted turning of 4340 hardened steel

Varun Sharma et al.

ULTRASONICS (2016)

Add to Collection

Article Engineering, Mechanical

Study on surface defects in milling Inconel 718 super alloy

Liu Chang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

Z. Wu et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Automation & Control Systems

Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718

G. Le Coz et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

Phases, microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloys at elevated temperatures

Woei-Ren Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Engineering, Industrial

Modeling and analysis of coated tool temperature variation in dry milling of Inconel 718 turbine blade considering flank wear effect

Sijie Yan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

Add to Collection

Review Engineering, Mechanical

Tool wear mechanisms in the machining of Nickel based super-alloys: A review

Waseem Akhtar et al.

FRONTIERS OF MECHANICAL ENGINEERING (2014)

Add to Collection

Article Engineering, Manufacturing

Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling

B. Denkena et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

Woei-Ren Wang et al.

INTERMETALLICS (2012)

Add to Collection

Article Engineering, Industrial

An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools

J. M. Zhou et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure

A. Turnbull et al.

CORROSION SCIENCE (2011)

Add to Collection

Review Engineering, Manufacturing

Machining induced surface integrity in titanium and nickel alloys: A review

Durul Ulutan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)

Add to Collection

Article Chemistry, Physical

Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys

C. Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Add to Collection

Article Chemistry, Physical

Microstructure and tensile behaviors of FCC Al0.3CoCrFeNi high entropy alloy

Tao-Tsung Shun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Chemistry, Physical

Microstructure and mechanical property of as-cast, -homogenized, and -deformed AlxCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys

Yih-Farn Kao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤2) high-entropy alloys

Hsuan-Ping Chou et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)

Add to Collection

Review Physics, Multidisciplinary

Residual stress and its role in failure

P. J. Withers

REPORTS ON PROGRESS IN PHYSICS (2007)

Add to Collection

Article Nanoscience & Nanotechnology

Analysis of material response to ultrasonic vibration loading in turning Inconel 718

N. Ahmed et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Review Engineering, Manufacturing

A review of developments towards dry and high speed machining of Inconel 718 alloy

D Dudzinski et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

Article Engineering, Industrial

Tool life when high speed ball nose end milling Inconel 718™

A Sharman et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.