☆ 4.6 Article

EIS and LEIS Study on In Vitro Corrosion Resistance of Anodic Oxide Nanotubes on Ti-13Zr-13Nb Alloy in Saline Solution

COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Influence of Anodizing Conditions on Biotribological and Micromechanical Properties of Ti-13Zr-13Nb Alloy

Agnieszka Stroz et al.

Summary: The research focuses on the effect of anodizing conditions on the micromechanical and biotribological properties of Ti-13Zr-13Nb alloy. Anodizing was performed to produce first-generation (1G), second-generation (2G), and third-generation (3G) porous oxide nanotubes' (ONTs) layers on the alloy surface. The microstructure was characterized using SEM and micromechanical properties were tested by the Vickers microhardness test. Biotribological properties were examined using a ball-on-flat system in Ringer's solution. The composition of the electrolyte with fluoride ions was found to be crucial in determining the properties of the ONT layers.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

In Vitro Bioelectrochemical Properties of Second-Generation Oxide Nanotubes on Ti-13Zr-13Nb Biomedical Alloy

Agnieszka Stroz et al.

Summary: Surface charge and in vitro corrosion resistance are important parameters for biomaterials in the interaction with the biological environment. This study analyzed the in vitro bioelectrochemical behavior of second-generation oxide nanotubes (ONTs) on a Ti-13Zr-13Nb alloy. The ONTs were produced by anodization and their properties were characterized using microscopy and spectroscopy techniques. The results showed that electrolyte type and strength influenced the bioelectrochemical properties of the ONTs layers.

MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Production and Characterization of the Third-Generation Oxide Nanotubes on Ti-13Zr-13Nb Alloy

Bozena Losiewicz et al.

Summary: This study developed a method of electrochemical modification of the Ti-13Zr-13Nb alloy surface to obtain third-generation oxide nanotubes (ONTs). The experiment showed that anodizing within a specific voltage range resulted in ONTs with high quality and certain thickness, and these layers had little influence from neutral salt spray.

MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Synthesis and evaluation of composite TiO2@ZnO quantum dots on hybrid nanostructure perovskite solar cell

Negin Pezhooli et al.

Summary: This interdisciplinary study focuses on the application of nanotechnology in solar cells, particularly perovskite solar cells, and the use of TiO2@ZnO nanocomposites. The research aims to enhance the efficiency of solar cells and produce clean energy. The efficiency of the fabricated cell was reported to be about 5%, but further optimization of conditions and compositing with other materials could increase the efficiency.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article

Effect of amorphous calcium phosphate coatings on tribological properties of titanium grade 4 in protein-free artificial saliva

Patrycja Osak et al.

Biotribology (2022)

Add to Collection

Article Chemistry, Physical

Effect of double thermal and electrochemical oxidation on titanium alloys for medical applications

Agnieszka Ossowska et al.

Summary: The research focused on the development and characterization of innovative thin hybrid oxide coatings obtained through thermal and electrochemical oxidation processes. Different surface modifications were investigated to improve the mechanical, chemical, and biological properties of Ti-13Nb-13Zr alloy. The study showed that the double titanium oxide coatings produced had high surface roughness, corrosion resistance, hydrophilicity, slight antibacterial properties, and were not cytotoxic, which have significant implications for tissue-implant integration.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Characterization and mechanical properties of TiO2 nanotubes formed on titanium by anodic oxidation

Salih Durdu et al.

Summary: The study successfully created TiO2 nanotube array surfaces at different voltages and analyzed their morphology, composition, properties, and mechanical performance. It was found that the roughness and thickness of the nanotube structures increased with higher voltage values.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Influence of Sandblasting Process on Tribological Properties of Titanium Grade 4 in Artificial Saliva for Dentistry Applications

Patrycja Osak et al.

Summary: This study examined the tribological wear of Titanium Grade 4 dental implants in artificial saliva, and the effect of sandblasting on their properties. Sandblasting was found to increase residual stress and surface hardening of the implants, alter surface wettability, reduce tribological wear, and lower the friction coefficient. The study proposed a three-body abrasion wear mechanism to explain the wear behavior of Titanium Grade 4 in saliva.

MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Production, Characterization and Application of Oxide Nanotubes on Ti-6Al-7Nb Alloy as a Potential Drug Carrier

Bozena Losiewicz et al.

Summary: This work developed a method to functionalize the surface of the biomedical Ti-6Al-7Nb alloy by producing oxide nanotubes (ONTs) with drug-eluting properties. The morphology, microstructure, and thickness of the ONTs were shaped by anodization in an aqueous solution, with characterization performed using SEM, XPS, and EDAX methods. The ONTs, mainly composed of TiO2, Al2O3, and Nb2O5, could potentially serve as drug carriers in modern implantology for local drug delivery in inflammatory conditions.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Properties, Corrosion Resistance and Bioactivity of Oxide Layers Formed by Isothermal Oxidation of Ti-6Al-7Nb Alloy

Krzysztof Aniolek et al.

Summary: This study focused on the isothermal oxidation of Ti-6Al-7Nb biomedical alloy to improve its mechanical properties, corrosion resistance, and bioactivity. The research found that increasing oxidation temperature led to thicker oxide layers, higher surface roughness, hardness, corrosion resistance, and contact potential difference. Moreover, the oxidized alloy exhibited the ability to form HAp in a biological environment.

COATINGS (2021)

Add to Collection

Review Engineering, Mechanical

Biomedical materials: A review of titanium based alloys

F. A. Anene et al.

Summary: Titanium alloys are highly valued in the biomedical field for their excellent mechanical properties, corrosion resistance, and biocompatibility. With the increasing demand for implants, there is an urgent need to accelerate research and development of biomaterials, with titanium alloys playing a crucial role in implant production.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Engineering, Biomedical

Long-Term Assessment of the In Vitro Corrosion Resistance of Biomimetic ACP Coatings Electrodeposited from an Acetate Bath

Patrycja Osak et al.

Summary: Calcium phosphate coatings can enhance the osseointegration process and demonstrate good corrosion resistance in experiments. In this study, biomimetic amorphous calcium phosphate (ACP) coatings were successfully prepared by electrodeposition, and their performance on titanium alloy surfaces was characterized and studied.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2021)

Add to Collection

Editorial Material Chemistry, Physical

Special Issue: Ti-Based Biomaterials: Synthesis, Properties and Applications

Jaroslaw Jakubowicz

MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Functionalization of the NiTi Shape Memory Alloy Surface by HAp/SiO2/Ag Hybrid Coatings Formed on SiO2-TiO2 Glass Interlayer

Karolina Dudek et al.

MATERIALS (2020)

Add to Collection

Article Crystallography

Kinetics of Capability Aging in Ti-13Nb-13Zr Alloy

Myoungjae Lee et al.

CRYSTALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Two-Stage Anodization on Properties of the Oxide Coatings on the Ti-13Nb-13Zr Alloy

Agnieszka Ossowska et al.

COATINGS (2020)

Add to Collection

Article Chemistry, Physical

Effect of Autoclaving Time on Corrosion Resistance of Sandblasted Ti G4 in Artificial Saliva

Bozena Losiewicz et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Variation in Mechanical Properties of Ti-13Nb-13Zr Depending on Annealing Temperature

Taekyung Lee

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Materials Science, Biomaterials

Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation

Bruna C. Costa et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Chemistry, Applied

Synthesis of oxide nanotubes on Ti13Nb13Zr alloy by the electrochemical method

Piotr Handzlik et al.

JOURNAL OF POROUS MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Wetting properties of titanium oxides, oxynitrides and nitrides obtained by DC and pulsed magnetron sputtering and cathodic arc evaporation

Bozana Colovic et al.

MATERIALS SCIENCE-POLAND (2019)

Add to Collection

Article Materials Science, Coatings & Films

Microstructure and properties of TiO2 nanotube coatings on bone plate surface fabrication by anodic oxidation

Shuxu Wu et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Proceedings Paper Nanoscience & Nanotechnology

Electrochemical Synthesis of Oxide Nanotubes on Biomedical Ti13Nb13Zr Alloy with Potential Use as Bone Implant

Agnieszka Stroz et al.

7TH INTERNATIONAL CONFERENCE ON NANO AND MATERIALS SCIENCE (ICNMS 2019) (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Tribological properties of nanotubes grown on Ti-35Nb alloy by anodization

Aline R. Luz et al.

THIN SOLID FILMS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

EIS Study on Interfacial Properties of Passivated Nitinol Orthodontic Wire in Saliva Modified with EludrilA® Mouthwash

P. Osak et al.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2018)

Add to Collection

Article Materials Science, Coatings & Films

Effect of Zr addition on the microstructure and tribological property of the anodization of Ti-6Al-4V alloy

Shiwei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Effect of hydrogen electrosorption on corrosion resistance of Pd80Rh20 alloy in sulfuric acid: EIS and LEIS study

Bozena Losiewicz et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Production, structure and biocompatible properties of oxide nanotubes on Ti13Nb13Zr alloy for medical applications

A. Stroz et al.

MATERIALS CHARACTERIZATION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

FTIR and Raman Characterization of TiO2 Nanoparticles Coated with Polyethylene Glycol as Carrier for 2-Methoxyestradiol

Andrea Leon et al.

APPLIED SCIENCES-BASEL (2017)

Add to Collection

Article Multidisciplinary Sciences

Fabrication, Optimization and Characterization of Natural Dye Sensitized Solar Cell

William Ghann et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Physics, Multidisciplinary

Electrochemical Formation of Second Generation TiO2 Nanotubes on Ti13Nb13Zr Alloy for Biomedical Applications

A. Stroz et al.

ACTA PHYSICA POLONICA A (2016)

Add to Collection

Article Electrochemistry

Electrochemical synthesis of oxide nanotubes on Ti6Al7Nb alloy and their interaction with the simulated body fluid

Michal Stepien et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

EVALUATION OF CORROSION RESISTANCE OF NANOTUBULAR OXIDE LAYERS ON THE Ti13Zr13Nb ALLOY IN PHYSIOLOGICAL SALINE SOLUTION

A. Smolka et al.

ARCHIVES OF METALLURGY AND MATERIALS (2015)

Add to Collection

Article Physics, Multidisciplinary

Electrochemical Formation of Self-Organized Nanotubular Oxide Layers on Ti13Zr13Nb Alloy for Biomedical Applications

A. Smołka et al.

ACTA PHYSICA POLONICA A (2014)

Add to Collection

Article Chemistry, Physical

A.c. impedance study on the interfacial properties of passivated Ti13Zr13Nb alloy in physiological saline solution

Magdalena Szklarska et al.

SURFACE AND INTERFACE ANALYSIS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

TiO2 nanotubes, nanochannels and mesosponge: Self-organized formation and applications

Damian Kowalski et al.

NANO TODAY (2013)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Formation of High Corrosion Resistant Nanotubular Layers on Titanium Alloy Ti13Nb13Zr

A. Ossowska et al.

ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES (2012)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Application of EIS to Study the Corrosion Resistance of Passivated NiTi Shape Memory Alloy in Simulated Body Fluid

M. Freitag et al.

ENVIRONMENTAL DEGRADATION OF ENGINEERING & MATERIALS ENGINEERING AND TECHNOLOGIES (2012)

Add to Collection

Article Materials Science, Multidisciplinary

INSIGHT INTO THE STRUCTURE AND FORMATION OF TITANIUM OXIDE NANOTUBES

Yingchun Zhu

FUNCTIONAL MATERIALS LETTERS (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.