☆ 4.7 Article

Microstructure and high temperature mechanical properties of the Mg-Gd-Y(-Nd)-Zr alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Improvements of elevated temperature tensile strengths of Mg-Gd-Y-Zr alloy through squeeze cast

Cunlong Wang et al.

Summary: The paper reports a comparative study on the influence of environmental temperature on microstructural evolution and tensile mechanical behaviors of squeeze cast and gravity cast magnesium alloys. The results show that the ultimate tensile strength and elongation of the squeeze cast alloy are improved compared to the gravity cast alloy. The abnormal increase in strength within a certain elevated temperature range is attributed to insufficient strain hardening at lower temperatures, restricting further plastic deformation.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Zhenzhen Gui et al.

Summary: Magnesium alloy processed by equal-channel angular pressing (ECAP) shows excellent microstructure refinement and enhanced strength and hardness, supporting its applications in various industries. Pre-treatment of solution-treated magnesium alloy investigated the precipitate behavior and microstructure evolution during ECAP, resulting in improved comprehensive mechanical properties.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Nd on microstructure and mechanical properties of as-cast Mg-12Gd-2Zn-xNd-0.4Zr alloys with stacking faults

Lixin Hong et al.

Summary: The effects of Nd addition on microstructure and mechanical properties of Mg-Gd-Zn-Zr alloys were studied. The addition of Nd significantly refines the grain and achieves a uniform microstructure. With increasing Nd content, the tensile yield strength and microhardness increase, while the compression yield strength decreases, resulting in a weakening of tension-compression yield asymmetry in the alloy.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mechanical properties of Mg-Gd-Zr alloy by Nd addition combined with hot extrusion

Liu-wei Zheng et al.

Summary: The effect of Nd addition on the microstructure and mechanical properties of as-extruded Mg-9Gd-0.5Zr alloy is investigated. Nd addition results in the disappearance of elongated non-dynamic recrystallized grains and the formation of uniformly distributed dynamic recrystallized grains. In addition, the precipitation of nano-Mg5(Gd,Nd) particles enhances the strength and ductility of the alloy.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

On the solid solution substitutional position and properties of Mg-Gd alloy

Dongdong Gu et al.

Summary: The effects of gadolinium addition on crystallographic characteristics and physical properties of Mg-Gd alloy were investigated. The results show that gadolinium atoms prefer to be located on the prismatic plane. Solid solution strengthening and ductilizing effect occur in the range of 1-4 wt.% gadolinium. The alloy's ductility and crystallographic characteristics change with an increase in gadolinium content.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of High-Strength Mg-Gd-Nd-Zn-Sn-Zr Alloy via Extrusion and Aging

Zehua Yan et al.

Summary: A high-strength Mg-based alloy bar was successfully fabricated by extrusion and two-step aging processes. The extent of extrusion was found to affect the refinement mechanisms of the alloy, with larger extents leading to finer grains and eutectic phases. Peak-aged treatment resulted in increased strength due to the presence of beta' phase and LPSO phase. Over-aging led to reduced performance as lamellar precipitates and spherical beta' phase increased in size.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation behavior characterized by reticular shear bands and long chain twins in Mg-Gd-Nd(-Zn)-Zr alloys

Qian Zhang et al.

Summary: This study analyzed the deformation behavior of Mg-Gd-Nd(-Zn)-Zr alloys under high temperature uniaxial compression, and reported two special nucleation mechanisms of dynamic recrystallization (DRX): Shear band dynamic recrystallization (SBDRX) and Twin dynamic recrystallization (TDRX). The addition of Zn mutates the DRX mechanism, making TDRX dominant in the alloy and inducing abnormal nucleation of a large number of {10-12} twins.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Nd addition on the microstructure and mechanical properties of extruded Mg-Gd-Zr alloy

Bin Lei et al.

Summary: The newly developed Mg-4Gd-0.5Zr-xNd extruded alloys demonstrate good microstructure and mechanical properties, with the addition of Nd significantly influencing the grain size and strength of the alloy, increasing yield strength while maintaining elongation-to-failure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synergistic effect of LPSO and eutectic phase on mechanical properties of Mg-Gd-Nd-Zn-Zr alloy during equal channel angular pressing

Liuwei Zheng et al.

Summary: In this study, the microstructure evolution and strengthening mechanisms of homogenized Mg-9Gd-2Nd-1.6Zn-1Zr alloys subjected to various equal channel angular pressing (ECAP) passes were systematically investigated. After 8 ECAP passes, the grain size was dramatically refined, while excellent mechanical properties were achieved after 4 passes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Recent developments and applications on high-performance cast magnesium rare-earth alloys

Guohua Wu et al.

Summary: This paper reviews the progress and developments of high-performance Mg-RE alloys in recent years, focusing on cast alloys. The main topics covered include alloy design, melt purification, grain refinement, castability, novel casting methods, and industrial applications. The review offers insights for future developments in new alloys, techniques, and applications of Mg alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Substitution Effects of Gd with Nd on Microstructures and Mechanical Properties of Mg-10Gd-0.4Zr Alloys

Shifeng Luo et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Creep behaviors of a highly concentrated Mg-18 wt%Gd binary alloy with and without artificial aging

Jing Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Sm on Microstructure, Mechanical Property and Lattice Constant of As-Cast Mg-11Gd-2Y-0.6Al Alloy

Xiaoya Chen et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile creep behavior and microstructure evolution of Mg-11Gd-2Y-0.5Zr alloy

Xiaoya Chen et al.

VACUUM (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Precipitate evolution in Mg-7Gd-3Y-1Nd-1Zn-0.5Zr alloy during isothermal ageing at 240°C

Wei Liu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems

Jinghuai Zhang et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of Nd/Gd value on the microstructures and mechanical properties of Mg-Gd-Y-Nd-Zr alloys

Xuan Liu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of Nd on the microstructure and mechanical properties of Mg-8Gd-5Y-2Zn-0.5Zr alloy

Xingguo Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure evolution of semi-solid Mg-10Gd-3Y-0.5Zr alloy during isothermal heat treatment

Guohua Wu et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Enhanced strength and ductility of Mg-Gd-Y-Zr alloys by secondary extrusion

X. Li et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and creep behavior of the extruded Mg-4Y-4Sm-0.5Zr alloy

Qudong Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures and mechanical properties of Mg-8Gd-0.6Zr-xNd (x=0, 1, 2 and 3 mass%) alloys

Qiuming Peng et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Chemistry, Physical

Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy

S. M. He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Add to Collection

Article Nanoscience & Nanotechnology

The creep behaviour of rheo-diecast AZ91D (Mg-9Al-1Zn) alloy

S. Ji et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure evolution in a Mg-15Gd-0.5Zr (wt.%) alloy during isothermal aging at 250°C

X. Gao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Creep deformation mechanisms in coarse-grained solid solution Mg alloys

SW Chung et al.

MATERIALS TRANSACTIONS (2004)

Add to Collection

Review Materials Science, Multidisciplinary

Recent magnesium alloy development for elevated temperature applications

AA Luo

INTERNATIONAL MATERIALS REVIEWS (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation of fine-grained alumina by grain boundary sliding accommodated by slip

OA Ruano et al.

ACTA MATERIALIA (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Observation and interpretation of some microstructural features of low stress creep

KR McNee et al.

SCRIPTA MATERIALIA (2002)

Add to Collection

Article Nanoscience & Nanotechnology

Creep-resistant magnesium alloys

BL Mordike

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Denuded zones, diffusional creep, and grain boundary sliding

J Wadsworth et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Aging characteristics and high temperature tensile properties of Mg-Gd-Y-Zr alloys

IA Anyanwu et al.

MATERIALS TRANSACTIONS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.