☆ 4.7 Article

Experimental study on the mechanical behavior of 5A90 aluminum-lithium alloy subjected to combined tensile-shear loadings The combined strength of 5A90 aluminum-lithium alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Natural aging behaviors of Al-Cu-Li alloy: PLC effect, properties and microstructure evolution

C. H. Wu et al.

Summary: This study deepy explored the natural aging behaviors and underlying mechanism of the 2195 Al-Cu-Li alloy. Results indicate that the alloy exhibits a strong response in the early stage of natural aging, with the tensile strength rapidly increasing after 4 hours and reaching a plateau after 24 hours. The contribution of solute atoms, delta'/beta' precipitates, and GP zones to strength in the natural aging state is similar, at around 161 MPa, 80 MPa, and 141 MPa, respectively.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review: Crystal structure, evolution and interaction mechanism with dislocations of nano precipitates in Al-Li alloys

Xinyue Zhao et al.

Summary: This critical review investigates and discusses the nano precipitates in Al-Li alloys, including their composition, atomic structure, and relationship with the matrix. The paper provides detailed analysis on the crystallography, nucleation mechanism, and evolution process, as well as insights for future research directions.

MATERIALS & DESIGN (2022)

Add to Collection

Review Engineering, Civil

Structural fire behaviour of aluminium alloy structures: Review and outlook

Zhongxing Wang et al.

Summary: Aluminium alloys are widely used in the construction industry, and research on their performance and behavior in fire conditions is necessary. This paper reviews recent studies and provides recommendations for future work on the structural fire behavior of aluminium alloy structures.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Mechanical properties of 7A04-T6 high strength structural aluminium alloy at elevated temperatures and after cooling down

Zhongxing Wang et al.

Summary: In recent years, there has been an increasing use of high strength aluminium alloys in structural applications, however, the mechanical properties of these materials are sensitive to elevated temperatures. This paper presents an experimental study on the mechanical properties of 7A04-T6 high strength aluminium alloy at elevated temperatures and after cooling down. The study found that the Young's modulus and strengths decrease dramatically at temperatures above 200℃, but a large proportion of them regains after cooling down. The post-fire mechanical properties of the material exposed to 400℃ was found to be higher than those exposed to 300℃. Based on the test data, design formulae for the elevated-temperature retention factors and post-fire residual factors were proposed.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Effect of Luders and Portevin-Le Chatelier localization bands on plasticity and fracture of notched steel specimens studied by DIC and FE simulations

S. C. Ren et al.

Summary: The study investigates the impact of the PLC effect on plasticity and fracture of C-Mn steel, showing that at elevated temperature, the PLC effect leads to changes in crack morphology and reduces the absorbed fracture energy.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Engineering, Civil

Experimental investigation on the damage effect of 6063-T5 aluminum alloy circular tubes subjected to blast after exposure to fire

Tao Jiang et al.

Summary: This study experimentally investigated the damage effects of 6063-T5 aluminum alloy circular tubes exposed to natural fire and then subjected to blast loads, analyzing four failure modes. The results showed that increasing fire duration and decreasing stand-off distance or wall thickness intensified the damage degree of the circular tube. Energy ratio and flattening parameter were introduced for quantitative study of deformation and damage characteristics.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The Portevin-Le Chatelier (PLC) effect in an Al-Cu aluminum alloy fabricated by selective laser melting

Zhiheng Hu et al.

Summary: An Al-Cu alloy fabricated by selective laser melting was chosen to study the Portevin-Le Chatelier (PLC) effects. The study revealed that heat treatment decreases dislocation density and the decrease in solute atom concentration and dislocation density are responsible for the attenuation of PLC effects. The strong anisotropy in PLC effects observed in the as-built samples is attributed to grain structure and texture.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Multiaxial deformation behavior of aluminum alloy 6061 subjected to fire damage

S. B. Puplampu et al.

Summary: This study evaluates the effect of fire damage on aluminum alloy AA6061, finding a 60-70% strength reduction after fire exposure, but the ability to withstand higher maximum tensile loads during combined loading. Fire exposure relieves microstructure while mechanical loading results in strain-induced grain refinement.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

An Investigation on the Anisotropic Plastic Behavior and Forming Limits of an Al-Mg-Li Alloy Sheet

Yubao Wang et al.

Summary: Anisotropic properties of the Al-Mg-Li alloy sheet were systematically studied using uniaxial and cruciform biaxial tension tests. The Yld2000-2d yield function provided a better description of the yield locus, and the modified M-K model successfully predicted the forming limits of the sheet. Results showed good agreement with experimental data.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Propagating bands of plastic deformation in a metal alloy as critical avalanches

Tero Makinen et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Strength of Aluminum Alloys for Bridge Building

A. V. Korgin et al.

RUSSIAN METALLURGY (2020)

Add to Collection

Article Engineering, Mechanical

Material response, localization, and failure of an aluminum alloy under combined shear and tension: Part I experiments

Martin Scales et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Construction & Building Technology

Post-fire mechanical properties of aluminum alloy 6082-T6

Yu Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Influence of electropulsing treatment combined with pre-deformation on ageing behavior and mechanical properties of 5A90 Al-Li alloy

Han Xiao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure analysis and low-cycle fatigue behavior of spray-formed Al-Li alloy 2195 extruded plate

Qingyou Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Engineering, Civil

Strength of steel and aluminium alloy ship plating under combined shear and compression/tension

M. S. Syrigou et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Article Mechanics

Investigating mechanical degradation due to fire exposure of aluminum alloy 5083 using crystal plasticity finite element method

Ran Ma et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Natural aging behaviors and mechanisms of 7050 and 5A90 Al alloys: A comparative study

G. W. Zheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

Shear fatigue behavior of AW2099-T83 aluminum-lithium alloy

Muhammed J. Adinoyi et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Chemistry, Physical

EBSD Investigation of the Microtexture of Weld Metal and Base Metal in Laser Welded Al-Li Alloys

Li Cui et al.

MATERIALS (2018)

Add to Collection

Article Mechanics

A new shear and tension based ductile fracture criterion: Modeling and validation

Qi Hu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Experimental investigation of tensile properties and anisotropy of 1420, 8090 and 2060 Al-Li alloys sheet undergoing different strain rates and fibre orientation: a comparative study

Ali Abd El-Aty et al.

INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017 (2017)

Add to Collection

Article Construction & Building Technology

Shear strengthening of reinforced concrete beams using externally-bonded aluminum alloy plates: An experimental study

Jamal A. Abdalla et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Review Nanoscience & Nanotechnology

Anisotropic behavior studies of aluminum alloy 5083-H0 using a micro-tensile test stage in a FEG-SEM

Glenda T. Motsi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Engineering, Civil

Experimental investigation on the post-fire mechanical properties of structural aluminum alloys 6061-T6 and 7075-T73

Zhihua Chen et al.

THIN-WALLED STRUCTURES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Tensile behaviour of aluminium 7017 alloy at various temperatures and strain rates

Ravindranadh Bobbili et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)

Add to Collection

Article Engineering, Mechanical

Failure behavior of 2024-T3 aluminum under tension-torsion conditions

Marcos Rodriguez-Millan et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Quantification of stress-induced damage and post-fire response of 5083 aluminum alloy

Y. Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure-based modeling of residual yield strength and strain hardening after fire exposure of aluminum alloy 5083-H116

Patrick T. Summers et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Engineering, Civil

Residual mechanical properties of aluminum alloys AA5083-H116 and AA6061-T651 after fire

P. T. Summers et al.

ENGINEERING STRUCTURES (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Grain structure and microtexture evolution during superplastic deformation of 5A90 Al-Li alloy

Pan Zhang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Add to Collection

Article Mechanics

Ductile failure under combined shear and tension

S. S. Haltom et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Engineering, Civil

Compression load failure of aluminum plates due to fire

Emily J. Fogle et al.

ENGINEERING STRUCTURES (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Nd:YAG laser welding on microstructure and hardness of an Al-Li based alloy

Li Cui et al.

MATERIALS CHARACTERIZATION (2012)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review of experimental results and constitutive descriptions for metals and alloys in hot working

Y. C. Lin et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Two different types of shear-deformation behaviour in Au-Cu multilayers

Y. P. Li et al.

PHILOSOPHICAL MAGAZINE LETTERS (2009)

Add to Collection

Article Mechanics

Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading

Liang Xue

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Plastic flow stability of metallic nanolaminate composites

A. Misra et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Physics, Applied

Experimental evidence of plastic deformation instability in nanoscale Au/Cu multilayers

GP Zhang et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.