Related references
Note: Only part of the references are listed.Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering
Yihe Liu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)
Brazing ZrB2-SiC ceramics to Nb with a novel CoFeNiCrCu high entropy alloy
Gang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
A new high entropy alloy brazing filler metal design for joining skutterudite thermoelectrics to copper
Matthew Way et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure and mechanical properties of ZrB2-SiC/Nb joints brazed with CoFeNiCrCuTix high-entropy alloy filler
Yunlong Yang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)
Joining of Ti-coated monolithic SiC using a SiCw/Ti3SiC2 filler by electric field-assisted sintering
Teng Yu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Interfacial microstructure characterization and strength evaluation of Si3N4/Si3N4 joints with Si-Mg composite filler for high-temperature applications
Kazuyuki Kohama
CERAMICS INTERNATIONAL (2021)
Wetting behavior and brazing of titanium-coated SiC ceramics using Sn0.3Ag0.7Cu filler
Xiaoguo Song et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Joining of alumina ceramics using silicon-magnesium composite filler for high-temperature applications
Kazuyuki Kohama
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)
A novel high entropy CoFeCrNiCu alloy filler to braze SiC ceramics
Gang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Application of the eutectic high entropy alloy Nb0.73CoCrFeNi2.1for high temperature joints
W. Tillmann et al.
WELDING IN THE WORLD (2020)
Evaluation of dissimilar metal joining of aluminum alloy to stainless steel using the filler metals with a high-entropy design
Dejia Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effects of the elemental composition of high-entropy filler metals on the mechanical properties of dissimilar metal joints between stainless steel and low carbon steel
Dejia Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Study on the wetting interface of Zr-Cu alloys on the SiC ceramic surface
Bofang Zhou et al.
RSC ADVANCES (2020)
Laser-induced metallization of porous Si3N4 ceramic and its brazing to TiAl alloy
Yixuan Zhao et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Effect of Ti addition on the wetting and brazing of Sn0.3Ag0.7Cu filler on SiC ceramic
Mianmian Li et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Graphene nanoplatelets reinforced AgCuTi composite filler for brazing SiC ceramic
Yanyu Song et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis
Jian Yang et al.
APPLIED SURFACE SCIENCE (2018)
Liquid phase sintering and characterization of SiC ceramics
A. C. Santos et al.
CERAMICS INTERNATIONAL (2018)
SiC ceramics joined with an in-situ reaction gradient layer of TiC/Ti3SiC2 and interface stress distribution simulations
Xiaobing Zhou et al.
CERAMICS INTERNATIONAL (2018)
Residual thermal stress of SiC/Ti3SiC2/SiC joints calculation and relaxed by postannealing
Xiaobing Zhou et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)
Joining of Cf/SiBCN composite with CuPd-V filler alloy
Wen-Wen Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Laser brazing of a nickel-based superalloy using a Ni-Mn-Fe-Co-Cu high entropy alloy filler metal
Denzel Bridges et al.
MATERIALS LETTERS (2018)
KD-S SiCf/SiC composites with BN interface fabricated by polymer infiltration and pyrolysis process
Honglei Wang et al.
JOURNAL OF ADVANCED CERAMICS (2018)
Effects of surface microstructure on the active element content and wetting behavior of brazing filler metal during brazing Ti3SiC2 ceramic and Cu
H. Y. Chen et al.
VACUUM (2018)
Flash joining of CVD-SiC coated Cf/SiC composites with a Ti interlayer
Peter Tatarko et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Interfacial characterization in the brazing of silicon nitride to niobium joining using a double interlayer
M. Morales-Perez et al.
MATERIALS CHARACTERIZATION (2017)
Facile preparation of in situ coated Ti3C2Tx/Ni0.5Zn0.5Fe2O4 composites and their electromagnetic performance
Youbing Li et al.
RSC ADVANCES (2017)
Effect of Ti content on the wetting behavior of Sn0.3Ag0.7Cu/AlN system
W. Fu et al.
MATERIALS & DESIGN (2017)
Brazing of silicon carbide ceramics with Ni-Si-Ti powder mixtures
W. B. Tian et al.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2017)
Interfacial microstructure and mechanical properties of zirconia ceramic and niobium joints vacuum brazed with two Ag-based active filler metals
N. Wang et al.
CERAMICS INTERNATIONAL (2016)
Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering
Peter Tatarko et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Vacuum brazing of alumina to stainless steel using femtosecond laser patterned periodic surface structure
Y. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Interfacial microstructure and mechanical properties of ZrB2-SiC-C ceramic and GH99 superalloy joints brazed with a Ti-modified FeCoNiCrCu high-entropy alloy
L. X. Zhang et al.
MATERIALS & DESIGN (2016)
Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology
Xiaobing Zhou et al.
JOURNAL OF NUCLEAR MATERIALS (2015)
Wettability of transparent YAG (Y3Al5O12) by molten Ag-Cu-Ti alloys
S. Gambaro et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Microstructures and mechanical properties of Cf/SiC composite and TC4 alloy joints brazed with (Ti-Zr-Cu-Ni) plus W composite filler materials
Bing Cui et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Radiation-tolerant joining technologies for silicon carbide ceramics and composites
Yutai Katoh et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Joining of β-SiC by spark plasma sintering
Salvatore Grasso et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
(Fe,Cr)7C3/Fe surface gradient composite: Microstructure, microhardness, and wear resistance
Fangxia Ye et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites vacuum brazed with Ag-Cu filler metal
Zhenwen Yang et al.
MATERIALS CHARACTERIZATION (2011)
Survey on wetting of SiC by molten metals
G. W. Liu et al.
CERAMICS INTERNATIONAL (2010)
Brazing of carbon fiber reinforced SiC composite and TC4 using Ag-Cu-Ti active brazing alloy
Jin Hui Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Wetting behaviour of silicon nitride ceramics by Ti-Cu alloys
A. P. Luz et al.
CERAMICS INTERNATIONAL (2008)
Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/γ-Fe ceramal composite coating
Yuan-Fu Liu et al.
APPLIED SURFACE SCIENCE (2006)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)
Share Paper
