☆ 4.7 Article

Optimal corrosion resistance of cobalt-based dual-phase entropic alloys via compositional modulation of aluminum

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Machine learning for high-entropy alloys: Progress, challenges and opportunities

Xianglin Liu et al.

Summary: This review discusses the use of machine learning in overcoming challenges in the field of high-entropy alloys (HEAs). It introduces the basics of machine learning algorithms and application scenarios, summarizes the latest machine learning models for describing atomic interactions, thermodynamic and mechanical properties, and provides examples of machine-learned phase-formation rules and order parameters. The article also discusses the remaining challenges and future research directions, including uncertainty quantification and machine learning-guided inverse materials design.

PROGRESS IN MATERIALS SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Experimental investigation and thermodynamic description of the Fe-Hf-Nb system

Jiaxing Sun et al.

Summary: The liquidus surface projection and phase relationships were constructed in the Fe-Hf-Nb system at 1373 and 1273 K based on the solidification microstructure and phase constituents. The composition ranges of Nb in the ternary phase r were determined to be -20.5-30.8 at.% and -20.8-30.2 at.%, respectively. The maximum solubilities of Nb in FeHf2 were -16.9 at.% and -16.0 at.%, and the maximum solubilities of Hf in mu were -4.6 at.% and -3.3 at.%. The thermodynamic parameters of the individual phases were optimized using the CALPHAD method, and a set of self-consistent parameters was obtained for the Fe-Hf-Nb system. (c) 2023 Elsevier B.V. All rights reserved.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Chemistry, Physical

Experimental investigation of phase equilibria in the Co-Hf-Mo system at 1373 and 1223 K

Jiejie Shi et al.

Summary: Spark plasma sintering was used to fabricate a Co-Hf-Mo-Ni diffusion multiple, and the phase equilibria of the Co-Hf-Mo system at 1373 and 1223 K were analyzed using SEM, XRD, and EPMA techniques. The obtained phase equilibria data provide guidance for the development of multicomponent Co-based superalloys.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Thermodynamics

Experimental investigation and thermodynamic description of the Ni-Ta-W system

Jiejie Shi et al.

Summary: The liquidus surface projection and phase equilibrium relationships in the Ni-Ta-W system were studied using SEM, EPMA, and XRD techniques. The diffusion welding of the Ni-Ta-W diffusion triple was conducted using SPS. The Ni-Ta-W system was optimized using the CALPHAD method, and a set of self-consistent thermodynamic parameters was obtained.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Mechanical performances and processing-property modeling for Al0.3CoCrFeNiMn high-entropy alloy

Wenhui Guo et al.

Summary: The mechanical performances of Al0.3CoCrFeNiMn high-entropy alloy are strongly influenced by processing technology. This study investigates the microstructure and mechanical properties of the alloy after solution treatment, cold rolling, and annealing, and utilizes backpropagation artificial neural network models to predict its properties. The results demonstrate that twinning induced plasticity contributes to the strength and plasticity of the alloy, while excellent phase stability is observed in both solid solution and cold rolling conditions. The neural network models achieve an average accuracy of 93.4% in predicting elongation, yield, and tensile strength, showing a remarkable agreement with experimental results. The importance of parameters is assessed, with reduction rate, annealing temperature, and solutionizing temperature identified as significant factors.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High corrosion resistance duplex fcc plus hcp cobalt based entropic alloys: An experimental and theoretical investigation

Wei Wang et al.

Summary: A series of duplex fcc + hcp Co-based entropic alloys with outstanding mechanical properties have been discovered. CALPHAD-based thermo-dynamic calculations and electrochemical tests were conducted to understand the alloy design and corrosion behaviors. High corrosion resistance materials with high strength and ductility were found, and various spinel compounds and oxides were observed in the passive films. The breakdown of passive films due to corrosive anion Cl- could lead to pitting corrosion. The microstructure of the alloys played a crucial role in localized anodic dissolution. The theoretical calculations were consistent with experimental observations. This study paves the way for future development of high-performance Co-based entropic alloys in harsh environments.

MATERIALS & DESIGN (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Grain distribution characteristics and effect of diverse size distribution on the Hall-Petch relationship for additively manufactured metal alloys

Fengxia Wei et al.

Summary: The study compared EBSD and OM techniques, investigated the effects of different parameters on results, and proposed a modified Hall-Petch equation considering grain size distributions for almost all AM alloy systems with remarkable agreement between predicted strength and experimental values.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Multicomponent high-entropy Cantor alloys

B. Cantor

Summary: Multicomponent high-entropy Cantor alloys, discovered in the late 1970s, occupy a vast region of multi-component phase space and exhibit excellent mechanical properties due to high configurational entropy. The complexity of local atomic configurations and associated lattice strains in these alloys contributes to their unique characteristics and potential for further enhancement and optimization.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Resistance sintering of CoCrFeNiAlx (x=0.7, 0.85, 1) high entropy alloys: Microstructural characterization, oxidation and corrosion properties

Y. Garip et al.

Summary: In this study, the cyclic oxidation and electrochemical corrosion behaviors of CoCrFeNiAlx high entropy alloys produced by resistance sintering were investigated. The results showed that increasing the Al content can enhance the cyclic oxidation resistance of the HEAs but also decrease their corrosion resistance in acid and saltwater environments.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy

Zhongji Sun et al.

Summary: One major hindrance in alloy design for additive manufacturing (AM) is hot tearing, and a new approach of segregation engineering can effectively prevent hot tearing and achieve systematic additive manufacturing of alloys.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Inclusion engineering in Co-based duplex entropic alloys

Wei Wang et al.

Summary: The study reveals that Co-based alloys with different Cr contents exhibit varying liquidus and solidus temperatures, as well as undercooling during solidification. The stable oxide inclusions in different alloys differ in type and particle size, with theoretical calculations showing the influence of thermo-physical parameters on their coagulation coefficient. The theoretical calculations are in good agreement with experimental findings.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of microstructure and hardness in a dual-phase Al0.5CoCrFeNi high-entropy alloy with different grain sizes

Hao-Xue Yang et al.

RARE METALS (2020)

Add to Collection

Article Chemistry, Physical

Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior

R. Sokkalingam et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Chemistry, Physical

Microstructure, phase formation and physical properties of AlCoCrFeNiMn high-entropy alloy

S. A. Uporov et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microbeam plasma arc remanufacturing: Effects of Al on microstructure, wear resistance, corrosion resistance and high temperature oxidation resistance of AlxCoCrFeMnNi high-entropy alloy cladding layer

Fuzing Ye et al.

VACUUM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

Shuhei Yoshida et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Thermodynamics

Thermodynamic constitution of the Al-Cu-Ni system modeled by CALPHAD and ab initio methodology for designing high entropy alloys

Wei Wang et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Competition between formation of Al2O3 and Cr2O3 in oxidation of Al0.3CoCrCuFeNi high entropy alloy: A first-principles study

Yu Hong et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

An experimental and theoretical study of duplex fcc plus hcp cobalt based entropic alloys

Wei Wang et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures

Q. Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

In-situ electrochemical-AFM study of localized corrosion of AlxCoCrFeNi high-entropy alloys in chloride solution

Yunzhu Shi et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy

Vikas Shivam et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Physics, Condensed Matter

Thermodynamic evaluation of pure Co for the third generation of thermodynamic databases

Zhou Li et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2017)

Add to Collection

Article Chemistry, Physical

Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Rui Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Mapping the world of complex concentrated alloys

Stephane Gorsse et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion of AlxCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior

Yunzhu Shi et al.

CORROSION SCIENCE (2017)

Add to Collection

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy

Tengfei Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

High-Temperature Oxidation Behavior of Al-Co-Cr-Ni-(Fe or Si) Multicomponent High-Entropy Alloys

T. M. Butler et al.

JOM (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

J. Y. He et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-Entropy Alloys by Laser Melting

Travis G. Novak et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Phase formation in mechanically alloyed AlxCoCrCuFeNi (x=0.45, 1, 2.5, 5 mol) high entropy alloys

R. Sriharitha et al.

INTERMETALLICS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of annealing treatment on microstructures and mechanical properties of FeCoNiCuAl high entropy alloys

Y. X. Zhuang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys

Shin-Tsung Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤2) high-entropy alloys

Hsuan-Ping Chou et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Nanomechanics of Hall-Petch relationship in nanocrystalline materials

C. S. Pande et al.

PROGRESS IN MATERIALS SCIENCE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on. the corrosion behaviour in aqueous environments

C. P. Lee et al.

CORROSION SCIENCE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating

PK Huang et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Thermodynamics

THERMO-CALC & DICTRA, computational tools for materials science

JO Andersson et al.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.