☆ 4.7 Article

Investigation of microstructure and mechanical properties of GH4169 superalloy joint produced by linear friction welding

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

The relationship between microstructure evolution and impact toughness degeneration of alloy 617B during long term aging

He Jiang et al.

Summary: The present study investigated the impact toughness degeneration and microstructure evolution of alloy 617B during long-term aging at temperatures of 650-725 degrees Celsius for up to 12,000 hours. It was found that the impact toughness decreases significantly even after just 20 hours of aging within the temperature range, and it continues to decrease as the aging time prolongs. The degeneration of impact toughness is attributed to the combined effect of plasticity evolution and grain boundary carbide coarsening. The degeneration process can be divided into rapid decrease stage, slow decrease stage, and stable stage. Sufficient attention should be paid to the impact toughness degeneration when evaluating long-term stability.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Editorial Material Materials Science, Multidisciplinary

Constitutive modeling and dynamic recrystallization mechanism elaboration of FGH96 with severe hot deformation

Chang-an Li et al.

Summary: This paper conducted hot compression experiments to analyze the deformation behavior and dynamic recrystallization of FGH96 at high temperature and strain rate conditions. Two strain modified viscoplastic constitutive models were established and proven to accurately reflect the deformation behavior and suitable for numerical simulation of IFW.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Diffusion bonding of copper alloy to nickel-based superalloy: effect of heat treatment on the microstructure and mechanical properties of the joints

Chengcong Zhang et al.

Summary: Successful diffusion bonding between a copper alloy and a Ni-based superalloy was achieved in this study, resulting in sound joints free from intermetallic, pores, and discontinuities. Post-bonding solution treatment followed by ageing restored the tensile strength of the copper alloy up to 77% of its original strength.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fatigue-creep behaviors of Ni-Fe based superalloy under various testing conditions

Zilong Zhao et al.

Summary: The fatigue-creep properties of Ni-Fe based superalloy under different conditions vary significantly, showing that increasing strain amplitude, temperature, and holding time all have an impact on fatigue cycles. Dislocations bypass second phase particles during deformation, and longer holding time leads to the growth of the second phase, ultimately exceeding the critical size for dislocation cutting.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of grain boundary character distribution in near-surface regions of a cold-rolled nickel-based superalloy during induction heating process

Zhen Lu et al.

Summary: The influence of induction heating on the grain boundary character distribution in a cold-rolled Nickel-based superalloy was studied. The type of grain boundaries and their distribution were closely related to the evolution of grain structures during induction heating, which was influenced by the heating temperature and strain level.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Manufacturing

Investigation of residual stress within linear friction welded steel sheets by alternating pressure via X-ray diffraction and contour method approaches

Ramy Gadallah et al.

Summary: The influence of applied pressure on residual stress behavior in linear friction welded medium carbon steel sheets was thoroughly investigated. Both X-ray diffraction and contour method techniques were used to determine the residual stress and confirmed the impact of applied pressure on its behavior. The study found that increasing pressure decreased tensile residual stress gradient near the weld line and decreased compressive residual stress, leading to a flattening behavior with higher pressure.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Weakening modes for the heat affected zone in Inconel 625 superalloy welded joints under different high temperature rupture conditions

Guanzhi Wu et al.

Summary: In this study, the weakening modes of the heat affected zone (HAZ) in IN625 welded joints during stress rupture tests were systematically investigated, revealing that chain-like particles and coarse Laves phase particles play key roles in initiating and propagating micro-cracks, eventually leading to specimen fracture. The study also found a dependence of rupture time on stress levels, with the microstructure and microhardness distribution reflecting the fracture patterns observed.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Manufacturing

Hydroforming process of complex T-shaped tubular parts of nickel-based superalloy

Xiao-Lei Cui et al.

Summary: The study successfully implemented the manufacturing of a GH4169 T-shaped tubular part with expanded diameter using a four-step hydroforming process. After removing the top of the side branch, a complex GH4169 T-shaped tubular part with a thickness more than 3 mm was obtained. These results provide important insights for the manufacturing of T-shaped tubular parts with expanded diameter and contribute to the development of the superalloy tube forming process at room temperature.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure control of medium carbon steel joints by low-temperature linear friction welding

Ryosuke Kuroiwa et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Study on microstructure and mechanical property of linear friction welding on 9Cr reduced activation ferrite/martensite steel

Chenxi Liu et al.

JOURNAL OF NUCLEAR MATERIALS (2020)

Add to Collection

Article Optics

Electron beam welding of aerospace alloy (Inconel 825): A comparative study of RSM and ANN modeling to predict weld bead area

Bishub Choudhury et al.

OPTIK (2020)

Add to Collection

Article Engineering, Aerospace

Role of the inter-pass cooling rate in recrystallization behaviors of Ni-based superalloy during interrupted hot compression

Xin Zhang et al.

CHINESE JOURNAL OF AERONAUTICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced laser weldability of an aerospace superalloy by thermal treatment

J. O. Aina et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)

Add to Collection

Article Engineering, Mechanical

Finite element models of friction behaviour in linear friction welding of a Ni-based superalloy

Peihao Geng et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Through analysis of the microstructure changes during linear friction welding of the near-α titanium alloy Ti-6Al-2Sn-4Zr-2Mo (Ti6242) towards microstructure optimization

Dorick Ballat-Durand et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants

Hongjun Zhang et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Characterization of residual stresses and microstructural features in an Inconel 718 forged compressor disc

Xiao-yan Xu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Article Engineering, Manufacturing

Microstructural characterization and mechanical property of GH4169 superalloy joints obtained by linear friction welding

Peihao Geng et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Finite element modelling for temperature, stresses and strains calculation in linear friction welding of TB9 titanium alloy

Xiawei Yang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Linear friction welding of AD730T™ Ni-base superalloy: Process-microstructure-property interactions

F. Masoumi et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy

F. Masoumi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure-based hot extrusion process control principles for nickel-base superalloy pipes

He Jiang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure-based hot extrusion process control principles for nickel-base superalloy pipes

He Jiang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Engineering, Manufacturing

On microstructure and property differences in a linear friction welded near-alpha titanium alloy joint

Yu Su et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches

M. Smith et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

Add to Collection

Article Chemistry, Physical

Thermo-physical simulation of the compression testing for constitutive modeling of GH4169 superalloy during linear friction welding

Xiawei Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of integrity and microstructure of linear friction welded Waspaloy

A. Chamanfar et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling Grain Size and Strain Rate in Linear Friction Welded Waspaloy

Ahmad Chamanfar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Engineering, Aerospace

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

Wang Zongren et al.

CHINESE JOURNAL OF AERONAUTICS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Suppressed liquation and microcracking in linear friction welded WASPALOY

A. Chamanfar et al.

MATERIALS & DESIGN (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Linear friction welding of aluminium to copper

I. Bhamji et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Linear friction welding of aluminium to magnesium

I. Bhamji et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Linear friction welding of Ti-6Al-4V: Modelling and validation

R. Turner et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169

K. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Property and Microstructure of Linear Friction Welded WASPALOY

A. Chamanfar et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-scale analysis of IN-718 microstructure evolution during Linear Friction Welding

Caroline Mary et al.

ADVANCED ENGINEERING MATERIALS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel

W. -Y. Li et al.

MATERIALS LETTERS (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys

M. Karadge et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.