Related references
Note: Only part of the references are listed.A novel approach to analyse combined pre and post strain rate dependent phase transformation in uniaxially deformed AISI 304 stainless steel using XRD and EBSD
S. Dey et al.
PHILOSOPHICAL MAGAZINE (2022)
Synchronous optimization of strengths, ductility and corrosion resistances of bulk nanocrystalline 304 stainless steel
S. G. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Anisotropic fracture modeling of sheet metals: From in-plane to out-of-plane
Bin Gu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Effect of strain and strain rate on the development of deformation heterogeneity during tensile deformation of a solution annealed 304 LN austenitic stainless steel: An EBSD study
Amrita Kundu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High ductility and transformation-induced-plasticity in metastable stainless steel processed by selective laser melting with low power
E. Polatidis et al.
SCRIPTA MATERIALIA (2020)
Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels
Mohammad Javad Sohrabi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Microscopic substructures of stainless steel 304 undergoing a uniaxial ratcheting deformation
Yawei Dong et al.
ACTA MECHANICA (2020)
Deformation-induced martensite in austenitic stainless steels: A review
Mohammad Javad Sohrabi et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Effect of Grain Size on the Friction-Induced Martensitic Transformation and Tribological Properties of 304 Austenite Stainless Steel
Bo Mao et al.
METALS (2020)
Improvement of strength-ductility balance of SAE 304 stainless steel by asymmetric cross rolling
Ali Amininejad et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
On the application of digital optical microscopy in the study of materials structure and deformation
E. S. Statnik et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Effect of annealing on mechanical properties and microstructure evolution of borated stainless steels
Chi-Hyoung Won et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Effect of the roughness produced by plasma nitrocarburizing on corrosion resistance of AISI 304 austenitic stainless steel
Paula Cisquini et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Surface polishing of AISI 304 stainless steel with micro plasma beam irradiation
Tiantian Deng et al.
APPLIED SURFACE SCIENCE (2019)
Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling
Ali Amininejad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-temperature fracture behavior of MnS inclusions based on GTN model
Xin-gang Liu et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2019)
Enhanced localized and uniform corrosion resistances of bulk nanocrystalline 304 stainless steel in high-concentration hydrochloric acid solutions at room temperature
S. G. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Microstructure and mechanical behavior of an AISI 304 austenitic stainless steel prepared by cold- or cryogenic-rolling and annealing
Chengsi Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The effect of pre-strain on tensile behaviour of 316L austenitic stainless steel
Jian Peng et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
In situ SEM analysis for deformation mechanism of micro/nanostructured 304 stainless steel with high strength and good plasticity
Jie Sheng et al.
MODERN PHYSICS LETTERS B (2018)
Effect of cryogenic deformation on microstructure and mechanical properties of 304 austenitic stainless steel
P. Mallick et al.
MATERIALS CHARACTERIZATION (2017)
Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing
Z. J. Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Comprehensive Understanding of Ductility Loss Mechanisms in Various Steels with External and Internal Hydrogen
Osamu Takakuwa et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Strain-induced reactivation of corrosion pits in austenitic stainless steel
F. A. Almuaili et al.
CORROSION SCIENCE (2017)
Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels
Linli Zhu et al.
ACTA MATERIALIA (2017)
Suppression of twinning and phase transformation in an ultrafine grained 2 GPa strong metastable austenitic steel: Experiment and simulation
Y. F. Shen et al.
ACTA MATERIALIA (2015)
Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy
R. D. K. Misra et al.
ACTA MATERIALIA (2015)
Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment
Mohammad Shirdel et al.
ADVANCED ENGINEERING MATERIALS (2015)
Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment
G. S. Sun et al.
MATERIALS CHARACTERIZATION (2015)
The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel
S. Sabooni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Silybum marianum extract as a natural source inhibitor for 304 stainless steel corrosion in 1.0 M HCl
N. Soltani et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility
Chang Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The high-temperature oxidation of bulk nanocrystalline 304 stainless steel in air
S. G. Wang et al.
CORROSION SCIENCE (2013)
Application of electrochemical noise to monitor stress corrosion cracking of stainless steel in tetrathionate solution under constant load
Mathias Breimesser et al.
CORROSION SCIENCE (2012)
Growth behaviour of small surface fatigue cracks in AISI 304 stainless steel
C. -M. Suh et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2012)
Phase transformations and micro cracks induced by hydrogen in cold-rolled and annealed AISI 304 stainless steels
Yongfeng Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Twinning and martensite in a 304 austenitic stainless steel
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling
B. Ravi Kumar et al.
SCRIPTA MATERIALIA (2012)
The influence of strain rate on the microstructure transition of 304 stainless steel
A. Y. Chen et al.
ACTA MATERIALIA (2011)
Passive film growth mechanism of nanocrystalline 304 stainless steel prepared by magnetron sputtering and deep rolling techniques
Chen Pan et al.
ELECTROCHIMICA ACTA (2011)
Effect of alloying elements on hydrogen environment embrittlement of AISI type 304 austenitic stainless steel
M. Martin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Effects of laser shock processing with different shocked paths on mechanical properties of laser welded ANSI 304 stainless steel joint
L. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Optimization of the strain rate to achieve exceptional mechanical properties of 304 stainless steel using high speed ultrasonic surface mechanical attrition treatment
H. L. Chan et al.
ACTA MATERIALIA (2010)
Characterization of strain-induced martensitic transformation in a metastable austenitic stainless steel
P. Hausild et al.
MATERIALS & DESIGN (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
On the Significance of Nature of Strain-Induced Martensite on Phase-Reversion-Induced Nanograined/Ultrafine-Grained Austenitic Stainless Steel
R. D. K. Misra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel
R. D. K. Misra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel
Arpan Das et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel
M. Anthony Xavior et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Microstructure and Deformation Behavior of Phase-Reversion-Induced Nanograined/Ultrafine-Grained Austenitic Stainless Steel
R. D. K. Misra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Correspondence of fracture surface features with mechanical properties in 304LN stainless steel
Arpan Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel
Arpan Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels
R. D. K. Misra et al.
SCRIPTA MATERIALIA (2008)
Transformation-induced plasticity in an ultrafine-grained steel:: An in situ neutron diffraction study
Kaixiang Tao et al.
APPLIED PHYSICS LETTERS (2007)
A constitutive model for the formation of martensite in austenitic steels under large strain plasticity
Hakan Hallberg et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels
R. Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Electrochemical corrosion behavior of nanocrystallized bulk 304 stainless steel
Nan Li et al.
ELECTROCHIMICA ACTA (2006)
Preparation and electrochemical corrosion behavior of bulk nanocrystalline ingot iron in HCl acid solution
SG Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Modeling void coalescence during ductile fracture of a steel
JP Bandstra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Anisotropic ductile fracture Part I: experiments
AA Benzerga et al.
ACTA MATERIALIA (2004)
Dynamic behavior of SUS304 stainless steel at elevated temperatures
XH Chen et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Effects of prestrain and strain rate on dynamic deformation characteristics of 304L stainless steel Part 2 - Microstructural study
WS Lee et al.
MATERIALS SCIENCE AND TECHNOLOGY (2002)
Effects of prior cold work and sensitization heat treatment on chloride stress corrosion cracking in type 304 stainless steels
C García et al.
CORROSION SCIENCE (2001)
Share Paper
