4.7 Article

DFT prediction of the stability and physical

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Elastic anisotropy, thermal conductivity and tensile properties of MAX phase V2GaC, Nb2GaC and Ta2GaC: First-principles calculations

Shanming Fan et al.

Summary: In this work, the structural characteristics, elastic anisotropy, thermal and phonon properties of hexagonal M2GaC compounds were calculated using the first-principle calculation method. The results show that M2GaC compounds are stable, but brittle materials with respect to Poisson's ratio, GH/BH and Cauchy pressure. The elastic anisotropy of M2GaC is illustrated, and the order of elastic anisotropy is Nb2GaC > Ta2GaC > V2GaC. The study also discusses the sound velocity, Debye temperature, thermal conductivity, and anisotropy for further understanding of MAX phase compounds.

VACUUM (2023)

Article Materials Science, Multidisciplinary

Computational evaluation of optoelectronic, thermodynamic and electron transport properties of CuYZ2 (Z= S, Se and Te) chalcogenides semiconductors

Mohammed Elamin Ketfi et al.

Summary: Copper-based chalcogenides materials show promise in various technological fields, especially in photovoltaics, with investigations into CuYSe2, CuYTe2, and CuYS2 revealing their potential for optoelectronic devices such as solar cells.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Materials Science, Multidisciplinary

Elastic anisotropies, thermal conductivities and tensile properties of MAX phases Zr2AlC and Zr2AlN: A first-principles calculation

Mingjun Peng et al.

Summary: The study found that Zr2AlC and Zr2AlN are mechanically stable and exhibit elastic anisotropy, with Zr2AlN showing slightly higher elastic anisotropy than Zr2AlC. Additionally, sound velocities, thermal conductivities, and tensile properties showed anisotropy along different crystal directions.

VACUUM (2022)

Article Physics, Condensed Matter

The Stability and Electronic and Thermal Transport Properties of New Tl-Based MAX-Phase Compound Ta2TlX (X: C or N)

Youcef Rached et al.

Summary: A comprehensive computational investigation of two new Tl-based MAX-phase compounds, Ta2TlC and Ta2TlN, reveals their stability, mechanical, electronic, and thermal transport properties. The compounds exhibit good chemical stability, dynamical and mechanical stability, metallic nature, and low thermal conductivities.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2022)

Article Physics, Condensed Matter

DFT analysis of physical properties of quaternary MAX phase nitrides: (Fe0.5M0.5)2SiN (M = Cr & Mn)

Ahmed Azzouz-Rached et al.

Summary: This study investigates the properties of newly discovered ordered quaternary MAX phases (Fe0.5M0.5)2SiN (M = Cr & Mn) using ab-initio calculations. It is found that the Mn- and Cr-substituted compounds are energetically favorable in different magnetic configurations. These phases exhibit metallicity and suitable thermodynamic properties for high-temperature applications.

COMPUTATIONAL CONDENSED MATTER (2022)

Article Materials Science, Multidisciplinary

Anisotropic Elastic and Thermal Properties of M2InX (M = Ti, Zr and X = C, N) Phases: A First-Principles Calculation

Bo Li et al.

Summary: First-principles calculations were used to estimate the anisotropic elastic and thermal properties of Ti(2)lnX (X = C, N) and Zr(2)lnX (X = C, N) M(2)AX phases. The findings showed that these materials are brittle and exhibit different elasticity and anisotropy. The Debye temperature, sound velocity, and thermal conductivity were also determined.

METALS (2022)

Article Materials Science, Multidisciplinary

The stability analysis and efficiency of the new MAX-phase compounds M3GaC2 (M: Ti or Zr): A first-principles assessment

A. A. Belkacem et al.

Summary: The primary goal of this work is to provide a DFT investigation report on the stability and mechanical, electronic, and thermal properties of the new MAX-phase compounds M3GaC2 (M: Ti or Zr). The investigated compounds were found to be stable and synthetically feasible based on energy, mechanical, and dynamic stability testing. The mechanical properties revealed that the compounds were anisotropic hard materials dominated by covalent bonds. The evaluated electronic structures and lattice thermal conductivities indicated metallic behavior. These compounds, with their high melting temperature and low thermal conductivity, were identified as promising materials for thermal barrier coating and hostile environments.

RESULTS IN PHYSICS (2022)

Article Engineering, Electrical & Electronic

First-principles investigations of Na2CuMCl6 (M = Bi, Sb) double perovskite semiconductors: Materials for green technology

Samah Al-Qaisi et al.

Summary: Investigations into stable lead-free double perovskites have revealed that Na2CuMCl6 (M = Bi, Sb) possess excellent optoelectronic performance and stability, indicating high potential for optoelectronic applications. The materials exhibit a small bandgap semiconductor behavior with a figure of merit (ZT) near unity, suggesting effectiveness in thermoelectric technology.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2022)

Article Materials Science, Multidisciplinary

First-principles prediction of thermodynamic properties and mechanical properties of Ti2AX (A=Al, Ga; X=C, N) M2AX phase at different pressures and temperatures

Bo Li et al.

Summary: First-principles calculations were used to investigate the mechanical and thermodynamic properties of Ti(2)AX phase under various pressures and temperatures. The results showed that Ti2AlC, Ti2AlN, Ti2GaC and Ti2GaN were stable under pressures of 0-50 GPa, and the effects of temperature and pressure on the thermodynamic properties were opposite.

VACUUM (2022)

Article Physics, Condensed Matter

First-principles calculations to investigate electronic, structural, optical, and thermoelectric properties of semiconducting double perovskite Ba2YBiO6

Samah Al-Qaisi et al.

Summary: This study presents a computational analysis of Ba2YBiO6 double perovskite, showing its potential for UV and visible-light optoelectronic devices, as well as thermoelectric applications.

MICRO AND NANOSTRUCTURES (2022)

Article Physics, Multidisciplinary

Comparative study of predicted MAX phase Hf2AlN with recently synthesized Hf2AlC: a first principle calculations

M. M. Uddin et al.

Summary: In this study, the physical properties of newly synthesized Hf2AlC and predicted Hf2AlN phases were explored using density functional theory for the first time. The compounds were found to exhibit metallic conductivity, low Vickers hardness, and high reflectivity, indicating their potential for reducing solar heating.

INDIAN JOURNAL OF PHYSICS (2022)

Article Physics, Condensed Matter

Electronic band structure, mechanical and thermodynamic properties of Erbium chalcogenides ErX (X = S, Se and Te): A computational insight

S. N. Tripathi et al.

Summary: The study investigated the properties of Erbium chalcogenides using density functional theory, finding them stable in a NaCI-type structure and ferromagnetic phase with metallic nature. The ErS compound showed highest stiffness resistance, and the calculated magnetic moments were mainly contributed by Er's f-electrons. The materials were found to be elastically anisotropic, exhibiting brittleness based on calculated bulk modulus to shear modulus ratio and Cauchy pressure. Thermodynamic constants were also calculated for the first time.

COMPUTATIONAL CONDENSED MATTER (2021)

Article Chemistry, Physical

Screen the thermomechanical and optical properties of the new ductile 314 MAX phase boride Zr3CdB4: A DFT insight

Muhammad Waqas Qureshi et al.

Summary: MAX phase borides, including the thermodynamically stable Zr3CdB4, exhibit enhanced thermo-mechanical properties and photoconductive behavior, showing potential for applications. The electronic structure, mechanical properties, and thermodynamic characteristics of Zr3CdB4 are investigated in detail, revealing its unique combination of ductility, anisotropy, and optoelectronic properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Pressure effects on the structural, elastic, magnetic and thermodynamic properties of Mn2AlC and Mn2SiC MAX phases

Ahmed Azzouz-Rached et al.

Summary: This study conducted a detailed theoretical investigation of the effects of pressure on the structural, elastic, magnetic, and thermodynamic properties of Mn2AlC and Mn2SiC MAX phases using density functional theory. The research found that Mn2AlC is a promising thermal barrier coating material, while Mn2SiC has a lower thermal expansion coefficient. The results of this study may inspire researchers worldwide to further explore the properties of MAX phases through experiments and theories.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Materials Science, Multidisciplinary

The Vanadium-doping effect on physical properties of the Zr2AlC MAX phase compound

Ahmed Azzouz-Rached et al.

Summary: The study investigated the Vanadium substitutions effect on the physical properties of Zr2AlC MAX phase compounds and found that the compounds exhibit good mechanical stability and strong elastic anisotropy.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Multidisciplinary Sciences

Ab initio predictions of structure and physical properties of the Zr2GaC and Hf2GaC MAX phases under pressure

Muhammad Waqas Qureshi et al.

Summary: First-principles calculations were used to investigate the electronic structure, structural stability, mechanical, phonon, and optical properties of Zr2GaC and Hf2GaC MAX phases under high pressure. The study found that both compounds are thermodynamically, mechanically, and dynamically stable under pressure, with potential applications in optoelectronic devices and as coating materials for reducing solar heating at pressures up to 50 GPa.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Multidisciplinary

Physical properties of new MAX phase borides M2SB (M = Zr, Hf and Nb) in comparison with conventional MAX phase carbides M2SC (M = Zr, Hf and Nb): Comprehensive insights

M. A. Ali et al.

Summary: This article presents a detailed study of the recently synthesized MAX phase borides M2SB (M = Zr, Hf, and Nb) using first principles technique. Mechanical properties, optical properties, and thermal properties were investigated, with Nb2SB compound exhibiting the best combination of mechanical properties. The covalent and ionic bonding within these borides were explained, along with the anisotropic factors and optical constants.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Chemistry, Multidisciplinary

Newly synthesized MAX phase Zr2SeC: DFT insights into physical properties towards possible applications

M. A. Ali et al.

Summary: A DFT study was conducted on the synthesized MAX phase Zr2SeC to explore its physical properties for potential applications in various sectors. A comparison with the known MAX phase Zr2SC revealed differences, particularly in mechanical properties, hardness, and thermal conductivity. Various thermodynamic and optical properties were analyzed to suggest Zr2SeC as a potential thermal barrier coating material with unique characteristics.

RSC ADVANCES (2021)

Article Chemistry, Physical

Lattice dynamical and thermo-elastic properties of M2AlB (M = V, Nb, Ta) MAX phase borides

Gokhan Surucu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Ceramics

Ta-based 413 and 211 MAX phase solid solutions with Hf and Nb

Matteo Griseri et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Chemistry, Physical

Computational Prediction of Boron-Based MAX Phases and MXene Derivatives

Nanxi Miao et al.

CHEMISTRY OF MATERIALS (2020)

Article Materials Science, Multidisciplinary

Screen the elastic and thermodynamic properties of MAX solid solution using DFT procedue: Case study on (Ti1-xVx)2AlC

Chunying Zuo et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Chemistry, Inorganic & Nuclear

The MAX phase borides Zr2SB and Hf2SB

Tobias Rackl et al.

SOLID STATE SCIENCES (2020)

Article Chemistry, Multidisciplinary

Chemically stable new MAX phase V2SnC: a damage and radiation tolerant TBC material

M. A. Hadi et al.

RSC ADVANCES (2020)

Article Physics, Condensed Matter

Study of the structural, mechanical and thermodynamic properties of the new MAX phase compounds (Zr1-xTi x)3AlC2

Ismail Ouadha et al.

COMPUTATIONAL CONDENSED MATTER (2020)

Article Physics, Applied

Simple and accurate model of fracture toughness of solids

Haiyang Niu et al.

JOURNAL OF APPLIED PHYSICS (2019)

Article Physics, Applied

First Principle Mechanical and Thermodynamic Properties of Some TbX (X = S, Se) Compounds

S. N. Tripathi et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2019)

Article Chemistry, Inorganic & Nuclear

Synthesis and Characterization of Double Solid Solution (Zr,Ti)2(Al,Sn)C MAX Phase Ceramics

Bensu Tunca et al.

INORGANIC CHEMISTRY (2019)

Review Chemistry, Multidisciplinary

On the Chemical Diversity of the MAX Phases

Maxim Sokol et al.

TRENDS IN CHEMISTRY (2019)

Article Physics, Condensed Matter

DFT calculations of structural, optoelectronic and thermodynamic properties of BxAl1-xP alloys

A. Settouf et al.

COMPUTATIONAL CONDENSED MATTER (2019)

Article Materials Science, Multidisciplinary

Synthesis, microstructure and properties of (Ti1-x, Mox)2AlC phases

Ruijuan Pan et al.

MATERIALS SCIENCE AND TECHNOLOGY (2018)

Article Materials Science, Multidisciplinary

Electronic and lattice dynamical properties of Ti2SiB MAX phase

Aysenur Gencer et al.

MATERIALS RESEARCH EXPRESS (2018)

Article Multidisciplinary Sciences

The double solid solution (Zr, Nb)2(Al, Sn)C MAX phase: a steric stability approach

Thomas Lapauw et al.

SCIENTIFIC REPORTS (2018)

Article Materials Science, Multidisciplinary

First principles study of M2InC (M = Zr, Hf and Ta) MAX phases: The effect of M atomic species

F. Sultana et al.

RESULTS IN PHYSICS (2018)

Article Physics, Condensed Matter

ELATE: an open-source online application for analysis and visualization of elastic tensors

Romain Gaillac et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2016)

Article Nanoscience & Nanotechnology

Elastic anisotropy of crystals

Christopher M. Kube

AIP ADVANCES (2016)

Article Nanoscience & Nanotechnology

Computational Analysis of Stable Hard Structures in the Ti-B System

Pengfei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Materials Science, Ceramics

Synthesis, characterization, and sintering behavior of Yb3Al5O12 powders

Xiaofei Wang et al.

CERAMICS INTERNATIONAL (2015)

Article Materials Science, Ceramics

Theoretical prediction on mechanical and thermal properties of a promising thermal barrier material: Y4Al2O9

Yanchun Zhou et al.

JOURNAL OF ADVANCED CERAMICS (2015)

Article Materials Science, Multidisciplinary

First-principles study of structural and electronic properties of C14-type Laves phase Al2Zr and Al2Hf

Wen-Cheng Hu et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Article Materials Science, Multidisciplinary

Necessary and sufficient elastic stability conditions in various crystal systems

Felix Mouhat et al.

PHYSICAL REVIEW B (2014)

Article Materials Science, Multidisciplinary

The effect of the interlayer element on the exfoliation of layered Mo2AC (A = Al, Si, P, Ga, Ge, As or In) MAX phases into two-dimensional Mo2C nanosheets

Mohammad Khazaei et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)

Review Materials Science, Multidisciplinary

A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in Air

Darin J. Tallman et al.

MATERIALS RESEARCH LETTERS (2013)

Article Chemistry, Multidisciplinary

Chalcopyrite CuGaTe2: A High-Efficiency Bulk Thermoelectric Material

Theerayuth Plirdpring et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Review Materials Science, Multidisciplinary

Elastic and Mechanical Properties of the MAX Phases

Michel W. Barsoum et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 41 (2011)

Article Chemistry, Physical

Modeling hardness of polycrystalline materials and bulk metallic glasses

Xing-Qiu Chen et al.

INTERMETALLICS (2011)

Article Physics, Condensed Matter

Elastic properties of superconducting MAX phases from first-principles calculations

Igor R. Shein et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2011)

Article Physics, Condensed Matter

A comprehensive survey of M2AX phase elastic properties

M. F. Cover et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2009)

Review Materials Science, Multidisciplinary

Superhard phases of simple substances and binary compounds of the B-C-N-O system: from diamond to the latest results (a Review)

O. O. Kurakevych

JOURNAL OF SUPERHARD MATERIALS (2009)

Article Materials Science, Multidisciplinary

Kinking Nonlinear Elasticity and the Deformation of Magnesium

A. G. Zhou et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)

Article Physics, Applied

Optical properties of Ti3SiC2 and Ti4AlN3

S. Li et al.

APPLIED PHYSICS LETTERS (2008)

Article Materials Science, Multidisciplinary

Ab initio calculations of elastic constants and thermodynamic properties of NiAl under high pressures

Hongzhi Fu et al.

COMPUTATIONAL MATERIALS SCIENCE (2008)

Article Physics, Multidisciplinary

Universal elastic anisotropy index

Shivakumar I. Ranganathan et al.

PHYSICAL REVIEW LETTERS (2008)

Article Physics, Condensed Matter

First-principles study of structural and elastic properties of Sc2AC (A = Al, Ga, In, Tl)

A. Bouhemadou et al.

SOLID STATE COMMUNICATIONS (2008)

Article Materials Science, Multidisciplinary

Electronic structures of and composition gaps among the ternary carbides Ti2MC

G. Hug

PHYSICAL REVIEW B (2006)

Article Materials Science, Multidisciplinary

Variational density-functional perturbation theory for dielectrics and lattice dynamics

K Refson et al.

PHYSICAL REVIEW B (2006)

Article Materials Science, Multidisciplinary

Theoretical model of intrinsic hardness

FM Gao

PHYSICAL REVIEW B (2006)

Article Materials Science, Coatings & Films

Materials selection guidelines for low thermal conductivity thermal barrier coatings

DR Clarke

SURFACE & COATINGS TECHNOLOGY (2003)

Article Materials Science, Multidisciplinary

Thermal and electrical properties of Nb2AlC, (Ti, Nb)2AlC and Ti2AlC

MW Barsoum et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Article Chemistry, Physical

Fabrication and electrical and thermal properties of Ti2InC, Hf2InC and (Ti,Hf)2InC

MW Barsoum et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2002)

Article Physics, Condensed Matter

First-principles simulation: ideas, illustrations and the CASTEP code

MD Segall et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2002)

Article Materials Science, Multidisciplinary

Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5

MW Barsoum et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)

Article Materials Science, Multidisciplinary

Electronic structure and bonding properties of layered machinable Ti2AlC and Ti2AlN ceramics

YC Zhou et al.

PHYSICAL REVIEW B (2000)