☆ 4.7 Article

Tensile properties hybrid effect of unidirectional flax/carbon fiber hybrid reinforced polymer composites

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Hydrothermal durability of unidirectional flax/carbon fiber hybrid composite plates

Anni Wang et al.

Summary: Hybrid carbon fiber/flax reinforced polymer composites (HFRPs) are cost-effective materials for structural applications. This study investigated the property evolution of HFRP plates immersed in water at 40 and 70 degrees C for eight weeks. The water uptake and flexural properties of the HFRP samples were analyzed based on hybrid modes and fiber contents. The diffusion coefficient and equilibrium water absorption of HFRPs increased with temperature, and the deterioration of performance was more pronounced. HFRPs with carbon fibers on the surface showed better hydrothermal resistance and lower water absorption compared to other hybrid modes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Engineering, Civil

Water absorption and long-term thermal and mechanical properties of carbon/glass hybrid rod for bridge cable

Rui Guo et al.

Summary: This study investigates the performance changes and degradation mechanism of fiber reinforced polymer (FRP) composite rod under hygrothermal aging conditions. The results reveal that water absorption and diffusion behavior follows a two-stage model, and resin plasticization and interfacial debonding are the main factors contributing to performance degradation.

ENGINEERING STRUCTURES (2023)

Add to Collection

Article Construction & Building Technology

Hygrothermal resistance of pultruded carbon, glass and carbon/glass hybrid fiber reinforced epoxy composites

Rui Guo et al.

Summary: In this study, the long-term hygrothermal properties of pultruded carbon, glass, and carbon/glass hybrid fiber reinforced polymer (CFRP, GFRP, C/GFRP) composites were experimentally evaluated. The diffusion of water molecules in the composites led to reversible resin plasticization and irreversible resin relaxation, causing degradation in thermal and mechanical properties. Based on the Arrhenius accelerating theory, the long-term life of the composites decreased, indicating the importance of considering hygrothermal effects in the application of FRP composites in civil engineering.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Manufacturing

Size effects in hybrid unidirectional polymer composites under longitudinal tension: A micromechanical investigation

Jose M. Guerrero et al.

Summary: The study finds that increasing the length or cross-section of the virtual RVE in fibre hybrid composites improves the hybrid effect but decreases ductility, without altering the magnitude of the size effects. Moreover, a larger hybrid effect does not necessarily translate into greater ductility.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Review Materials Science, Paper & Wood

Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments

M. R. M. Asyraf et al.

Summary: Kenaf, a plant fiber mainly composed of cellulose, shows potential as a replacement for synthetic fibers in biocomposites. Chemical treatments like alkaline, silane, and acetylation can enhance fiber properties, but their effects on dynamic mechanical behavior remain understudied. Additional chemical treatments and combined methods are being explored to improve the dynamic mechanical performance of kenaf biocomposites.

CELLULOSE (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites-A comprehensive review

G. Rajeshkumar et al.

Summary: The development of sustainable bio composites is driven by environmental concerns globally, with biodegradable polymers and natural fibers playing a vital role in this field. While PLA has distinct advantages, blending it with natural fibers is necessary to overcome its limitations and improve performance.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of rod size and fiber hybrid mode on the interface shear strength of carbon/glass fiber composite rods exposed to freezing-thawing and outdoor environments

Guijun Xian et al.

Summary: Three types of carbon/glass fiber reinforced polymer hybrid rods were developed to study the effects of rod size and fiber hybrid mode on interface shear strength. It was found that the fiber random hybrid mode led to a slight increase in water uptake, and temperature-alternating had a more significant impact on water uptake acceleration factor. Additionally, the increase in rod diameter prolonged the saturated water uptake time.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations

Azizatul Karimah et al.

Summary: Understanding the basic properties of natural fibers is crucial for determining their optimal uses, such as high-quality bio-composite raw materials. This review discusses the characteristics and potential uses of natural fibers, emphasizing their sustainability and economic values. The low density and high strength to weight ratio of natural fibers make them ideal for lightweight composites and reinforcement materials.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Review Mechanics

Thin-ply composite laminates: a review

Joel Galos

COMPOSITE STRUCTURES (2020)

Add to Collection

Review Engineering, Multidisciplinary

Recent advancements of plant-based natural fiber-reinforced composites and their applications

Mi Li et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Materials Science, Composites

High performances of plant fiber reinforced composites-A new insight from hierarchical microstructures

Zhongsen Zhang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A bundle-based shear-lag model for tensile failure prediction of unidirectional fi ber -reinforced polymer composites

Zheqi Peng et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Mechanics

Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory

Isa Emami Tabrizi et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effects of hybridization and hybrid fibre dispersion on the mechanical properties of woven flax-carbon epoxy at low carbon fibre volume fractions

Umeyr Kureemun et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Hybrid effect and pseudo-ductile behaviour of unidirectional interlayer hybrid FRP composites for civil engineering applications

Filipe Ribeiro et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Mechanics

Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy-glass/epoxy hybrid composites

Gergely Czel et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Engineering, Manufacturing

Hybrid effects in thin ply carbon/glass unidirectional laminates: Accurate experimental determination and prediction

M. R. Wisnom et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Engineering, Manufacturing

Damage analysis of pseudo-ductile thin-ply UD hybrid composites - A new analytical method

Meisam Jalalvand et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Engineering, Manufacturing

Nonlinear tensile behaviour of elementary hemp fibres. Part I: Investigation of the possible origins using repeated progressive loading with in situ microscopic observations

Vincent Placet et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Review Engineering, Manufacturing

Fibre hybridisation in polymer composites: A review

Yentl Swolfs et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Add to Collection

Article Agricultural Engineering

Elementary flax fibre tensile properties: Correlation between stress-strain behaviour and fibre composition

Anaele Lefeuvre et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

Add to Collection

Article Agricultural Engineering

Relationships between micro-fibrillar angle, mechanical properties and biochemical composition of flax fibers

Alain Bourmaud et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

Add to Collection

Article Engineering, Manufacturing

Estimation of the tensile strength of an oriented flax fiber-reinforced polymer composite

J. Andersons et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.