☆ 4.7 Article

Electropulse-induced texture elimination and 100 texture formation in hot-rolled annealed 35CrMo steel

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Regulating the recrystallized grain to induce strong cube texture in oriented silicon steel

Mengcheng Zhou et al.

Summary: A strong cube texture with ODF density of 50.73 mrd was successfully obtained by regulating the recrystallized grain orientation using cross-rolling and pulsed electric current. The recrystallized grain size of pulsed samples is about twice that of the annealed sample, achieved through the concurrent effects of electron wind force and Joule heating.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Electric current-induced precipitation hardening in advanced high-strength steel

Hye-Jin Jeong et al.

Summary: The effect of electric current on precipitation hardening for advanced high-strength steel is investigated. It is found that electric current can induce additional hardening effect, leading to an increase in material hardness and volume fraction of precipitates.

SCRIPTA MATERIALIA (2022)

Add to Collection

Article Chemistry, Physical

Rapid Microstructure Homogenization of a Laser Melting Deposition Additive Manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy by Electropulsing

Dandan Ben et al.

Summary: The study found that rapid changes in microstructure of the laser melting deposition (LMD) additive-manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy (TC11) can be achieved through electropulsing treatment (EPT), resulting in a more homogeneous structure. Additionally, EPT also slightly impacted the tensile properties of the sample.

MATERIALS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Anisotropic Electroplastic Effects on the Mechanical Properties of a Nano-Lamellar Austenitic Stainless Steel

Y. R. Ma et al.

Summary: The effects of electropulsing treatment (EPT) on microstructural evolution and mechanical properties of cold-rolled 316L austenitic stainless steel with nano-lamellar structure were investigated. Anisotropic electroplastic effects were observed for samples treated in different directions, leading to different hardness, strength, and ductility. The change in sensitivity of microstructures to thermal and athermal effects during EPT was attributed to the variation in current direction between the two types of samples.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Insight into the preferential grain growth of intermetallics under electric current stressing - A phase field modeling

Shuibao Liang et al.

Summary: This study utilized a phase field model to investigate the growth mechanism of intermetallics at the solder/Cu bonding interface under electric current stressing, revealing that the directional migration of grain boundaries and phase boundaries driven by electromigration induced the preferential growth behavior of intermetallics with higher electric conductivity. The study also demonstrated that faster phase boundary migration and growth of intermetallic grains with higher electric conductivity were induced by higher diffusion flux across the interface.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrafast solution treatment to improve the comprehensive mechanical properties of superalloy by pulsed electric current

Shuyang Qin et al.

Summary: The traditional solution and aging processes are key for achieving expected microstructure and excellent mechanical properties in K417G superalloy. Electropulsing solution treatment at 1000 degrees C for 10 minutes can achieve the desired microstructure and modify the harmful gamma/gamma' eutectic phase morphology, improving performance. The primary reasons for these changes are high current density areas between heterogeneous phases and a reduction in system thermodynamic barrier.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations

Xin Zhang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The evolution of cube ({001}<100>) texture in non-oriented electrical steel

Mehdi Mehdi et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of high magnetic field on the microstructure evolution and mechanical properties of M50 bearing steel during tempering

Feng Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Accelerated cluster dissolution using electropulsing for ultrafast performance regeneration

Shuyang Qin et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Electropulse-induced laminated structures in a ferritic-pearlitic 35CrMo steel

Chao Wu et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Dislocation structure evolution under electroplastic effect

Siqi Xiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A model for rapid austenitization in steel with ferrite and pearlite microstructure under electropulsing

Chao Wu et al.

MATERIALIA (2019)

Add to Collection

Article Chemistry, Physical

Recrystallization and texture evolution of cold-rolled AZ31 Mg alloy treated by rapid thermal annealing

Yanbin Jiang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Xiaopei Li et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of electropulsing treatment on the recrystallization and texture of Ni9W alloy strip

Jianan Liu et al.

JOURNAL OF MATERIALS RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Epitaxial Cu-Sn bulk crystals grown by electric current

C. Y. Liu et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Quantitative analysis of variant selection in ausformed lath martensite

G. Miyamoto et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Electropulsing Induced Texture Evolution in the Recrystallization of Fe-3 Pct Si Alloy Strip

Guoliang Hu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Intergranular strain and texture in steel Luders bands

R Hutanu et al.

ACTA MATERIALIA (2005)

Add to Collection

Article Materials Science, Multidisciplinary

High temperature tempering behaviors in a structural steel under high magnetic field

YD Zhang et al.

ACTA MATERIALIA (2004)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of texture on ridging of ferritic stainless steel

HJ Shin et al.

ACTA MATERIALIA (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Stress induced martensitic transformations in tension/torsion of CuAlNi single crystal tube

P Sittner et al.

SCRIPTA MATERIALIA (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.