☆ 4.7 Article

Use of waste glass powder toward more sustainable geopolymer concrete

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

A high-strength red mud-fly ash geopolymer and the implications of curing temperature

Bing Bai et al.

Summary: In response to the requirement for comprehensive utilization of industrial waste, high-strength geopolymers were prepared from red mud and fly ash. Increasing curing temperature and maintaining humidity during curing were found to enhance the strength of the geopolymer. The use of sodium hydroxide solution improved strength, but excessive concentration caused efflorescence. Strength of the geopolymer increased with the concentration of the mixed solution composed of sodium hydroxide solution and water glass.

POWDER TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

The Application of Rubber Aggregate-Combined Permeable Concrete Mixture in Sponge City Construction

Bowen Qi et al.

Summary: Permeable concrete is a new type of pavement material that improves urban flood discharge system and is significant for building a sponge city. By combining rubber aggregate with permeable concrete, the mix ratio of rubber permeable concrete is designed and applied to pavement engineering. The performance of the rubber permeable concrete is analyzed and evaluated, showing improved ecological benefits and economic advantages compared to ordinary permeable concrete.

COATINGS (2023)

Add to Collection

Article Engineering, Chemical

The Application of Recycled Epoxy Plastic Sheets Waste to Replace Concrete in Urban Construction and Building

Bowen Qi et al.

Summary: Epoxy plastic, a form of epoxy resin, is widely used in various industries due to its superior mechanical properties and adaptability. The application of waste epoxy plastic in urban highway construction has been studied, showing that it enhances the thermal and compressive resistance, tensile strength, and frost resistance of concrete. ER concrete exhibits good cohesive qualities and great mechanical capabilities due to the strong bond between epoxy resin and fibers. Moreover, ER concrete has superior fatigue resistance and can meet skid resistance standards.

PROCESSES (2023)

Add to Collection

Article Agricultural Engineering

Impact of incineration slag co-disposed with municipal solid waste on methane production and methanogens ecology in landfills

Ya-nan Wang et al.

Summary: This study investigates the impact of co-landfilling of incineration slag and municipal solid waste on methane production characteristics and microbiological mechanisms. The results show that the addition of slag can promote methane production and is positively correlated with methane concentration.

BIORESOURCE TECHNOLOGY (2023)

Add to Collection

Article Construction & Building Technology

A study on mechanical properties and permeability of steam-cured mortar with iron-copper tailings

Bing Zhao et al.

Summary: With the development of construction industrialization, the use of steam curing to produce precast concrete is widely used. In this study, the comprehensive utilization of iron-copper tailings (ICT) waste in steam-cured mortar (SCM) is investigated. The results show that the addition of appropriate ICT improves the mechanics and durability of SCM. Furthermore, the recycling of ICT in SCM demonstrates better economic and environmental benefits.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Reuse of soil-like material solidified by a biomass fly ash-based binder as engineering backfill material and its performance evaluation

Zhifa Qin et al.

Summary: The study focuses on the solidification of soil-like material obtained from landfill mining using a biomass fly ash-based binder (BB). The mechanical properties, permeability, microstructure, and physicochemical characteristics of the BB-solidified material are comprehensively characterized. The results indicate that the BB-solidified material improves in terms of mechanical properties and permeability with increasing BB content and solidification age.

JOURNAL OF CLEANER PRODUCTION (2023)

Add to Collection

Article Construction & Building Technology

Behavior of Metakaolin-Based geopolymer concrete at ambient and elevated temperatures

Abdulrahman Albidah et al.

Summary: Geopolymer or alkali-activated binders are being considered as sustainable alternatives to ordinary Portland cement. This study investigates the behavior of MK-based geopolymer concrete under ambient and elevated temperatures, with varying Na2O/Al2O3 and SiO2/Al2O3 molar ratios affecting the mechanical properties. The residual compressive strength and modulus of elasticity of geopolymer concrete after exposure to elevated temperature show good correlations with experiments.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Enhanced Thermal Stability, Mechanical Properties and Structural Integrity of MWCNT Filled Bamboo/Kenaf Hybrid Polymer Nanocomposites

J. M. Prabhudass et al.

Summary: The hybridization of natural fibers can enhance the tensile properties of polymer composites, while the addition of MWCNTs can significantly improve impact performance and viscoelastic behavior. Treating fibers with NaOH before composite fabrication effectively improves interfacial bonding and mechanical properties.

MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Utilisation of waste glass powder to improve the performance of hazardous incinerated biomedical waste ash geopolymer concrete

Arunachalam Suresh Kumar et al.

Summary: Biomedical waste, a hazardous mixture from various sources, poses significant risks to human health and the environment. Utilizing geopolymer concrete can effectively mitigate groundwater contamination caused by improper disposal of hazardous waste.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2022)

Add to Collection

Article Construction & Building Technology

Performance of glass powder substituted slag based geopolymer concretes under high temperature

Aslihan Nida Derinpinar et al.

Summary: Geopolymer concretes offer advantages in terms of recycling waste materials. The addition of glass powder improves the performance of geopolymer concretes exposed to high temperatures. However, as the substitution rate of glass powder increases, the mechanical properties of geopolymer concretes decrease.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures

Xi Jiang et al.

Summary: The effect of using waste glass powder (WGP) as a supplementary material for ordinary Portland cement (OPC) paste specimens was experimentally studied. The addition of WGP improved workability but prolonged the setting time of the OPC paste. It also reduced the degradation of the OPC matrix under high temperatures and mitigated the potential alkaline aggregate reaction (ASR) effect.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Chemistry, Physical

Mechanical Behavior of Crushed Waste Glass as Replacement of Aggregates

Ali Ihsan Celik et al.

Summary: This study found that waste glass powder has a better pozzolanic effect and can enhance the strength of concrete, while glass particles as aggregate replacements tend to decrease the strength. Adding waste glass as a partial replacement for fine aggregate significantly improves the tensile strength, and the increase in flexural strength is proportional to the amount of waste glass added. It is recommended to use waste glass as a replacement for 20% of both fine and coarse aggregates in practical applications.

MATERIALS (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Feasibility Study on Concrete Made with Substitution of Quarry Dust: A Review

Buthainah Nawaf AL-Kharabsheh et al.

Summary: This paper reviews the characteristics of QD-based concrete and its influencing factors. The findings show that the moderate use of QD can improve the performance of concrete, but a high percentage adversely affects the workability of concrete. In addition, up to 40-50% of QD can be utilized as a fine aggregate substitute without harmful effects on strength and durability.

SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Normal-Weight Concrete with Improved Stress-Strain Characteristics Reinforced with Dispersed Coconut Fibers

Evgenii M. Shcherban' et al.

Summary: According to the sustainable development concept, it is necessary to replace synthetic material fibers with natural and environmentally friendly renewable resources and agricultural waste. Using vegetable waste in concrete, especially coconut fiber, is an important and urgent task. This study investigates the strength properties of dispersed fiber-reinforced concrete with coconut fibers and examines the influence of fiber percentage on mechanical, physical, and deformation characteristics. The study found that a 1.75% reinforcement of coconut fibers resulted in significant improvements in mechanical properties, including compression, tension, and strain.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Composition Component Influence on Concrete Properties with the Additive of Rubber Tree Seed Shells

Alexey N. Beskopylny et al.

Summary: This study analyzed the impact of partially substituting coarse aggregate with rubber tree seed shells on concrete properties and determined the optimal composition for improved strength. Results showed that replacing 4% of the coarse filler with rubber tree seed shells led to the highest increase in strength features.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Use of recycled coal bottom ash in reinforced concrete beams as replacement for aggregate

Memduh Karalar et al.

Summary: This research investigates the crack and flexural behavior of reinforced concrete beams with various bottom ash ratios. Experimental and numerical tests show that a 75% bottom ash ratio results in the optimum displacement capacity. Simulations and experiments yield tiny cracks with very similar configurations.

FRONTIERS IN MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

A Review on Strength and Durability Properties of Wooden Ash Based Concrete

Buthainah Nawaf AL-Kharabsheh et al.

Summary: The partial replacement of cement with other building materials in concrete has gained attention due to research on industrial waste and sustainable construction practices. Wooden ash is one such substance that can be utilized in construction. However, there is a lack of comprehensive information on the impact of wooden ash on concrete properties. This review aims to gather relevant information on the background, physical and chemical aspects, and the effects of wooden ash on concrete properties. The results show that wooden ash can improve the strength and durability of concrete, but the optimal dosage is important. It is recommended that a 10% substitution of wooden ash is ideal. However, research on wooden ash in comparison to other waste materials is relatively limited.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Influence of Replacing Cement with Waste Glass on Mechanical Properties of Concrete

Ozer Zeybek et al.

Summary: This study examines the effect of waste glass on the mechanical properties of concrete. The results show that a moderate substitution of waste glass for cement can enhance the strength of concrete, while excessive substitution leads to poor workability. Furthermore, good adhesion is observed between waste glass and cementitious concrete. Empirical equations are proposed to estimate the strength values of concrete with different amounts of waste glass.

MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Effects of Waste Powder, Fine and Coarse Marble Aggregates on Concrete Compressive Strength

Bogachan Basaran et al.

Summary: The use of marble wastes in concrete mixtures has gained attention in the construction industry. However, existing studies on the effects of different forms of marble waste on concrete compressive strength have not reached clear conclusions, which limits its widespread use. Therefore, this study compiled 429 concrete mixtures with marble aggregates and conducted multivariate regression analyses to examine the relationships between test parameters and changes in concrete compressive strength. The results show that aggregate replacements of up to 50% can significantly affect the strength, regardless of the form of marble waste. The developed equations can accurately predict the strength changes with varying amounts and forms of marble aggregates.

SUSTAINABILITY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Improvement in Bending Performance of Reinforced Concrete Beams Produced with Waste Lathe Scraps

Memduh Karalar et al.

Summary: This study clearly detected the impacts of different proportions of tension reinforcement and waste lathe scraps on the failure and bending behavior of reinforced concrete beams through empirical tests. The results showed that the addition of waste lathe scraps improved the mechanical features of the beams, but decreased the consistency of the concrete.

SUSTAINABILITY (2022)

Add to Collection

Review Green & Sustainable Science & Technology

A Review on Sustainable Concrete with the Partially Substitutions of Silica Fume as a Cementitious Material

Jawad Ahmad et al.

Summary: This paper investigates the performance and structure of SCC with SF. The results show that SF lacks the filling and passing ability of SCC, but still falls within the limits defined by the technical specification. However, higher doses of SF have a negative impact on the flowability of SCC. Researchers recommend controlling the dosage of SF between 10 to 15%.

SUSTAINABILITY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Performance Assessment of Fiber-Reinforced Concrete Produced with Waste Lathe Fibers

Ali Ihsan Celik et al.

Summary: The increase in steel waste production due to improvements in steel manufacturing industries has caused significant environmental problems. This study investigates the effect of lathe scrap fibers on concrete performance and demonstrates that the reuse of these waste materials in different industries can reduce environmental pollution and provide low-cost products.

SUSTAINABILITY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Investigation on Improvement in Shear Performance of Reinforced-Concrete Beams Produced with Recycled Steel Wires from Waste Tires

Ceyhun Aksoylu et al.

Summary: Along with the increase in global vehicle sales, waste tires are becoming an increasingly serious problem. Reusing these waste materials instead of disposing them is crucial for preventing environmental pollution and creating new low-cost products. This study investigates the effect of recycled steel wires from waste tires on the properties of traditional reinforced-concrete beams. The results show that increasing fiber content effectively enhances the compressive and tensile strength of concrete.

SUSTAINABILITY (2022)

Add to Collection

Article Construction & Building Technology

Investigation of using waste marble powder, brick powder, ceramic powder, glass powder, and rice husk ash as eco-friendly aggregate in sustainable red mud-metakaolin based geopolymer composites

Mucteba Uysal et al.

Summary: Geopolymers are an important alternative to cement, allowing the use of waste materials. This study examines the contribution of different waste materials in the geopolymer composite structure. Testing and analysis show that some substitute materials have a successful performance, indicating significant potential in the production of sustainable geopolymers.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

A Critical Review of Waste Glass Powder as an Aluminosilicate Source Material for Sustainable Geopolymer Concrete Production

P. Manikandan et al.

Summary: Research on incorporating waste glass powder (WGP) as an aluminosilicate precursor material in geopolymer concrete preparation has been ongoing for twenty years, as an alternative sustainable construction material with a significant impact on reducing greenhouse gas emissions. More studies on the use of WGP in geopolymer concrete have been published in the past decade. However, there is still a lack of comprehensive information on the use of WGP as an aluminosilicate source material in binary, ternary, and quaternary blended geopolymer concrete.

SILICON (2021)

Add to Collection

Article Engineering, Multidisciplinary

Preparation and Characterization of High-Strength Geopolymer Based on BH-1 Lunar Soil Simulant with Low Alkali Content

Siqi Zhou et al.

Summary: A new type of lunar soil simulant named BH-1 was developed in this study, which closely resembles real lunar soil and was used to synthesize a geopolymer under simulated lunar atmospheric conditions. Supplementing aluminum sources in the geopolymer based on BH-1 significantly improved its strength, showing promising results for potential lunar base construction.

ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

The role of TBM asymmetric tail-grouting on surface settlement in coarse-grained soils of urban area: Field tests and FEA modelling

Chao Liu et al.

Summary: This paper investigates the impact of TBM tail-grouting on surface settlement in coarse-grained soils, demonstrating its influence through a shield-driven tunnel project and FEA modeling. Findings show that different tail-grouting parameters, particularly asymmetric tail-grouting, significantly affect ground settlement, with ground deformation directly correlated to tail-grouting pressure rather than grouting volume ratio.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)

Add to Collection

Review Engineering, Environmental

A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet

Wenkui Dong et al.

Summary: Recycling waste glass for developing cementitious and geopolymeric concretes as sustainable construction materials is gaining more attention in the construction industry. The durability performance of concrete with waste glass is affected by factors such as the type, size, and replacement ratio of waste glass, as well as other factors like mineral additives, mixing, and curing methods. Fine glass powder can improve long-term durability by enhancing pozzolanic reactivity and reducing ASR expansion.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Article Construction & Building Technology

Effect of waste glass incorporation on the properties of geopolymers formulated with low purity metakaolin

O. Burciaga-Diaz et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Engineering, Civil

Evaluation of Glass Powder-Based Geopolymer Stabilized Road Bases Containing Recycled Waste Glass Aggregate

Rui Xiao et al.

TRANSPORTATION RESEARCH RECORD (2020)

Add to Collection

Article Construction & Building Technology

Glass powder as a partial precursor in Portland cement and alkali-activated slag mortar: A comprehensive comparative study

Parham Shoaei et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Atomic-structure, microstructure and mechanical properties of glass powder modified metakaolin-based geopolymer

Ruizhe Si et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Influence of waste glass powder on the physico-mechanical properties and microstructures of fly ash-based geopolymer paste after exposure to high temperatures

Xi Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

Valorisation of glass waste for development of Geopolymer composites - Mechanical properties and rheological characteristics: A review

Salmabanu Luhar et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Waste glass as binder in alkali activated slag-fly ash mortars

G. Liu et al.

MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Civil

Effect of Addition of GGBS and Glass Powder on the Properties of Geopolymer Concrete

Harshsav Sethi et al.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash

Tawatchai Tho-In et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity

Dali Bondar et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Chemical

High strength geopolymer binder based on waste-glass powder

Mostafa Vafaei et al.

ADVANCED POWDER TECHNOLOGY (2017)

Add to Collection

Article Construction & Building Technology

Development of ultra-high-performance concrete using glass powder - Towards ecofriendly concrete

N. A. Soliman et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Utilization of waste glass powder in the production of cement and concrete

Ali A. Aliabdo et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Engineering, Environmental

Waste glass from end-of-life fluorescent lamps as raw material in geopolymers

Rui M. Novais et al.

WASTE MANAGEMENT (2016)

Add to Collection

Proceedings Paper Engineering, Industrial

Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars

Ahmad B. Malkawi et al.

PROCEEDING OF 4TH INTERNATIONAL CONFERENCE ON PROCESS ENGINEERING AND ADVANCED MATERIALS (ICPEAM 2016) (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation

M. Torres-Carrasco et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Construction & Building Technology

Characteristics of hemp fabric reinforced nanoclay-cement nanocomposites

A. Hakamy et al.

CEMENT & CONCRETE COMPOSITES (2014)

Add to Collection

Article Construction & Building Technology

Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation

F. Puertas et al.

CEMENT AND CONCRETE RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature

Tanakorn Phoo-ngernkham et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature

Partha Sarathi Deb et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Engineering, Multidisciplinary

Influence of aggregate content on the behavior of fly ash based geopolymer concrete

Benny Joseph et al.

SCIENTIA IRANICA (2012)

Add to Collection

Article Thermodynamics

Dielectric properties and temperature profile of fly ash-based geopolymer mortar

Saysunee Jumrat et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I - Low Si/Al ratio systems

L. Weng et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems

K. Sagoe-Crentsil et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Review Materials Science, Multidisciplinary

Geopolymer technology:: the current state of the art

P. Duxson et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Add to Collection

Article Engineering, Chemical

Effect of alkali cations on aluminum incorporation in geopolymeric gels

P Duxson et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.