Effects of laser power on the microstructural evolution of novel Ti-6Zr-5Fe alloy fabricated by selective laser melting

This work aims to study the influence of laser power on the microstructural evolution of novel Ti-6Zr-5Fe alloy fabricated by selective laser melting (SLM). The microstructural evolutions of all top surfaces in SLM Ti-6Zr-5Fe alloy samples fabricated from 80 W to 140 W were investigated in depth. The microstructure in SLM Ti-6Zr-5Fe alloy includes a phase and b phase, the size of the b phase and a phase increases with the increase of laser power due to the decrease of cooling rate. Meanwhile, the melt pool overlapping width increases with the increase of melt pool width due to the increase of laser power. The increase of melt pool overlapping causes the re-heating or re-melting of SLM Ti-6Zr-5Fe alloy. Moreover, as the laser power increases from 80 W to 140 W, the change of the melt pool greatly influenced the size, morphology, crystallographic orientation of the b phase, and their distributions. The increase of laser power causes adequate precipitation of the a phase, which improves the microhardness from 466 HV to 533 HV. The laser power can effectively regulate and control the microstructure and microhardness of SLM Ti alloys.& COPY; 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC

Automated summary

This study aims to investigate the influence of laser power on the microstructural evolution of a novel Ti-6Zr-5Fe alloy fabricated by selective laser melting (SLM). The microstructural evolutions of the top surfaces in SLM Ti-6Zr-5Fe alloy samples fabricated from 80 W to 140 W were thoroughly examined. The increase in laser power resulted in larger size of the b phase and a phase due to decreased cooling rate, as well as increased melt pool overlapping, leading to re-heating or re-melting. The findings demonstrate that laser power can effectively regulate and control the microstructure and microhardness of SLM Ti alloys.